Raptor:Raptor-Telematics Allow Update

From NewEagleWiki
Revision as of 14:34, 12 April 2018 by 107.4.110.88 (talk) (Created page with "Return to the main Raptor page Return to Raptor-Telematics Library page File:Stu_update_allowed_raptor.png|right|frame|Raptor-...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Return to the main Raptor page

Return to Raptor-Telematics Library page

Raptor-Telematics Allow Update

Description

This block notifies the TCM that it can apply a pending update. The application running on this controller will be stopped and a new application will then be loaded. Please assure that the system is in a safe state before triggering this block.

Parameters

Parameter Type Description
CAN Bus String This is the CAN bus (channel) on which the STU protocol will take place. This must also be the same CAN bus that the ECU reflash takes place on (typically CAN1).
Transmit Period(ms) uint16 Period for transmitting the 'Allow update' message to the TCM.
Function String Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.