Welcome to the New Eagle Support & Training Portal
Welcome to the New Eagle Support and Training “NEST” Portal of Raptor Knowledge, ECU Documentation, Application Notes, Training Modules, and other Wiki content. If you find this content helpful please be sure to “like” the relevant pages and if you have any comments or questions on content please submit a Support Ticket and our Support Team will be happy to further assist you with your questions.
Check out https://nest.support.neweagle.net/servicedesk/customer/portal/1/article/77889618 to learn how to submit a ticket and access and navigate through the site. It is best to Log In or Create an Account in order to have access to all underlying documentation within the NEST. If you have a question, type it in above or submit a ticket.
Table of Contents
Raptor Toolchain Suite
What's New in Raptor?
Downloads and Release Notes
Raptor User Manuals & Blocks Library
Raptor Hardware
Compilers for Raptor ECUs & Displays
Raptor ECUs
John Deere Family of ECUs
Third Party ECUs
Raptor Displays
Third Party Products
Raptor Toolchain Suite
Raptor® is New Eagle's embedded Model-Based Development (eMBD) platform which is a suite of software tools matched with off-the-shelf controller and display hardware designed to assist businesses as they develop control software for complex electromechanical systems, such as those found in hybrid or electric vehicles, mobile hydraulic systems, internal combustion engines, or other complex systems.
The Raptor Toolchain is designed to work with an extensive line of automotive-grade, production-ready control modules and displays. Developers can easily create, compile, build and flash their Simulink models onto ruggedized, off-the-shelf hardware without the hassle of manual programming. Supporting a variety of ECUs which range in pin count, I/O capabilities and processor configuration allows developers to select a commercially-available off-the-shelf (COTS) ECU that matches their application. Watch the video Here: What is Raptor? - New Eagle
Don’t forget to verify Installation Requirements for Raptor before you get started.
Each tool in the Raptor suite was developed with production in mind. Here’s a breakdown of components:
Click “Learn More” below to access Raptor Toolchain FAQs, Application Notes, User Manuals, and More!
Enables model-based development with fully automated code-generation to a production target.
Allows a live connection to your controller(s) to debug, tune and optimize how your system is running.
Streamlines system validation and regression testing. Since it has deep integration with Raptor-Dev, it delivers powerful testing capability.
Allows remote monitoring, fleet management, and over-the-air software updates. An off-the-shelf, low cost production capable GSM/ GPS system with CAN bus connectivity.
Provides software updates or troubleshooting to systems in the field; full range of configuration options allowing you to tailor the technician experience, and branding options to meet your design needs.
Raptor-Safe is a suite of advanced development tools for embedded systems, and tools for validation, verification, and certification of safety-critical or security-relevant software fully integrated with Raptor-Dev models.
Details about Raptor Licenses, the different offerings, how to purchase/install, and more.
New Eagle offers a variety of Training Courses and resources to train you on how to most effectively and efficiently utilize the Raptor Toolchain.
What’s New In Raptor?
New Eagle is continually making updates and optimizations to the Raptor Platform Toolchain. Check out the following articles for specific details on key highlights in new releases.
To check out what minimum version of Raptor-Dev and Raptor-Cal you need to design and communicate with Raptor Hardware revisions, Check out the following article:
Downloads and Release Notes
You must be logged in to view the following Downloads and Release Notes pages:
Raptor User Manuals & Blocks Library
You must be logged in to view the following content
Raptor Hardware
ECUs are one of the most integral components of your vehicle. As the brains behind everything electronic, your vehicle needs an ECU tailored to its unique demands. That's why we built our Raptor system to allow users to customize and program the ideal ECU for their latest project. Whether you’re building a prototype electric vehicle or preparing to manufacture a fleet of autonomous vehicles, we can provide the production-ready ECU to fit.
The controllers offered by New Eagle range in pin count, input, output, memory and processor configuration. A controller is able to be used in a variety of applications as long as the IO is in alignment with the system and safety requirements. Typically, the controller for a particular application is selected based on hardware capability such as I/O need, processor capability, communication requirements and voltage operating range.
Contact our sales team for assistance with questions regarding the selection of your electronic controller.
Compilers for Raptor ECUs & Displays
Check out Compilers for Raptor ECUs to learn more about which Complier is used for each ECU.
Raptor ECUs
These ECUs are designed by New Eagle’s own in-house engineers and have evolved to meet the needs of you, our customer!
John Deere Family of ECUs
Together, New Eagle and John Deere offer a full-spectrum embedded control solution: combining the Raptor toolchain with the rugged performance and reliability of John Deere hardware. From ECUs to edge computer, you now have the building blocks to go faster from concept to production.
Third Party ECUs
New Eagle also offers a variety of Raptor ECUs designed and built by a variety of OEMs.
Key Articles for Raptor Hardware:
You must be logged in to view the following articles.
Raptor Displays
New Eagle offers a wide variety of displays that can meet the needs of practically any automotive, hydraulic, marine or engine application. Whether your application demands a touchscreen display with custom graphics and data logging capability or you simply need to monitor generic engine parameters, New Eagle can provide a cost-effective display solution for your project. If your project does require a custom display, New Eagle can quickly develop custom software in-house or alternatively equip you with everything you need to begin developing custom display software yourself.
. Click below on one of the Display Images or go to our webstore to see which display may be right for you!
Key Articles for Raptor Displays:
You must be logged in to view the following articles.
Third Party Products
New Eagle distributes a variety of Third Party Products. Visit our Webstore or Contact sales@neweagle.net if you have any questions about these products.
Kvaser Devices
Click to Learn about our selection of CAN Interface Devices from Kvaser.
Smartcraft (Delphi GT150) Hardware
Click to Learn about our selection of Quick Connects for Bench Prototyping.
Veethree CAN Displays (Non-Raptor)
Click to Learn about our selection of Non-Raptor displays from Veethree with off-the-shelf software.
Input & Output Devices
Click to Learn about our selection of System Input and Output Devices, Protocol Converters, Keypads, Specialty IO Modules, and Dataloggers.
Sensors & Actuators
Click to Learn about our selection of Sensors and Actuators for any of your vehicle integration needs.
Transmissions, Electric Drives & Motors
Click to Learn about our selection of Transmissions, Electric Drives, and Electric Motors from a variety of manufacturers.
Inverters, Converters, & Chargers
Click to Learn about our selection of Inverters, Onboard Chargers, DC-AC Inverters, DC-DC Converters, and Onboard Charger/DC-DC Converter Combos.
Pumps & Compressors
Click to Learn about our selection of Cooling Pumps, HV Pumps, Compressors for Heating & Cooling, and Electric Fans.
Power Distribution Devices
Click to Learn about our Power Distribution Unit.
Battery Management Systems
Click to Learn about our BMS solutions.
Suggested forms
Support with Raptor Toolchain Software or Raptor Blocks
Support with Raptor Licensing
Connect with our Sales Team for purchases or other Sales related questions
Support with Application Software or Integration