Raptor:Raptor-Telematics Allow Update
Return to the main Raptor page
Return to Raptor-Telematics Library page
Description
This block notifies the TCM that it can apply a pending update. The application running on this controller will be stopped and a new application will then be loaded. Please assure that the system is in a safe state before triggering this block.
Parameters
| Parameter | Type | Description |
|---|---|---|
| CAN Bus | String | This is the CAN bus (channel) on which the STU protocol will take place. This must also be the same CAN bus that the ECU reflash takes place on (typically CAN1). |
| Transmit Period(ms) | uint16 | Period for transmitting the 'Allow update' message to the TCM. |
| Function | String | Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model. |