EV-Components

New Eagle > Products Wiki > Electric & Hybrid

Introduction

New Eagle delivers EV solutions that are scalable from the tools to develop and templates to use to the components and people to apply the solution.

Planning Guide

New Eagle has an extensive supplier network to provide the best validated components for electric and hybrid vehicles at competitive prices. We also have an experienced products team that can help you engineer the best solution for your project.

For assistance in the selection of components for your application, please request our eBook or send an email to sales@neweagle.net for assistance. Otherwise, please enjoy our EV and HEV product wiki.

Supervisory Controller

Supervisory Control Software

New Eagle has created a software template to enable rapid electric vehicle development. It is designed to interface with a variety of EV components and serves as a solid foundation for future development. The software includes validated startup/shutdown sequencing, torque management, component control and diagnostic strategies. It is available for either the Raptor or MotoHawk toolchains, and New Eagle will work with the customer to specify an appropriate controller based on the customer's requirements. New Eagle offers two options for providing the EV supervisory software template.

New Eagle Maintains Code

In the first option, New Eagle will customize the template according to the customer's requirements. Source code is kept and maintained by New Eagle. Typically, the software and calibration modifications require additional support from New Eagle in the form of an engineering contract. This option also includes a software license fee in any production supply agreement.

Picture	Part Number	Webstore	Downloads
	SW-NE-EVS-001	Please contact sales	-

Customer Maintains Code

In the second option, the customer purchases and receives the template source code (this includes the project directory and MATLAB® Simulink® files). With the appropriate licenses, the customer can modify and customize the source code per their requirements. If desired, New Eagle can provide additional development assistance with an engineering contract.

Picture	Part Number	Webstore	Downloads
	NE-EV Supervisor-001	Purchase	Datasheet

Supervisory Hardware Controller Options

New Eagle provides controllers for an EV supervisor, also known as the EV Vehicle Control Unit (VCU). Off-the-shelf controllers commonly used as VCUs include the following.

GCM-5605B-048-2104 (GCM48)

Processor	Inputs	Outputs	Communications	Operating Voltage
SPC5605B, 64 MHz	16	9	6 CAN 2.0B 2 LIN (Master) 1 LIN (Slave)	8-16VDC

Picture	Part Number	Webstore	Downloads	More Information
	GCM-5605B-048-2104	Purchase	Datasheet	More Details

RCM-58NN-112-2103 (RCM112)

Controller	Processor	Inputs	Outputs	Communications	Operating Voltage
RCM112-2202	SPC58NN, 200 MHz	43	40	5 CAN FD 2 LIN (1xMaster/Slave) 1x 2-Wire Ethernet 4 SENT	8-32VDC

Picture	Part Number	Webstore	Downloads	More Information
	RCM-58NN-112-2202	Purchase	Datasheet	Harnesses More Details

GCM-1793-196-1503 (GCM196)

Processor	Inputs	Outputs	Communications	Operating Voltage
260 MHz Infineon Tricore TC1793	45	45	3 CAN, 1 LIN	6-16VDC

Picture	Part Number	Webstore	Downloads	More Information
	GCM-1793-196-1503	Purchase	Datasheet	More Details

Electric Motors

Turntide

TURNTIDE's EVO axial flux electric motors are built with low-inertia composite rotors for excellent rotor dynamic stability.

TURNTIDE EVO AF130

Picture	Part Number	Webstore	Downloads
	TURNTIDE-EVO-130	Please contact sales	Datasheet

TUNRTIDE EVO AF140

Picture	Part Number	Webstore	Downloads
	TURNTIDE-EVO-140	Please contact sales	Datasheet

TURNTIDE EVO AF230

Picture	Part Number	Webstore	Downloads
	TURNTIDE-EVO-230	Please contact sales	Datasheet

TURNTIDE EVO AF240

Picture	Part Number	Webstore	Downloads
	TURNTIDE-EVO-240	Please contact sales	Datasheet

TURNTIDE EVO AF340

Picture	Part Number	Webstore	Downloads
	TURNTIDE-EVO-340	Please contact sales	Datasheet

Cascadia Motion

REM-HVH250 Series

Cascadia (Remy) HVH250 Series is a scalable motor with options for stack length, cooling and conductor configurations. They are available in housings, cartridges or as stator/rotor assemblies.

Picture	Part Number	Winding Type	Webstore	More Information
	BW-HVH250-115-DOC	Dual	Purchase	More Details Datasheets* Accessories
	BW-HVH250-90-DOC	Dual	Purchase
	BW-HVH250-90-DOM	Dual	Purchase
	BW-HVH250-90-SOM	Serial	Purchase
	BW-HVH250-115-DOM	Dual	Purchase
	BW-HVH250-115-SOM	Serial	Purchase

*Datasheets are not available for all of the possible motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.

REM-HVH410 Series

The new HVH410 is a powerful, rugged electric motor designed to drive heavy-duty and off-road vehicles, in addition to special equipment and power generation applications. The HVH410 is compact and has options for different stack lengths, cooling and conductor configurations. They are available in housings or as stator/rotor assemblies.

Picture	Part Number	Winding Type	Webstore	More Information
	BW-HVH410-75-DOM	Dual	Please contact sales	Datasheet* More Details
	BW-HVH410-75-DOM-D (with male and female shaft)	Dual	Please contact sales	Datasheet* More Details
	BW-HVH410-75-SOM	Serial	Please contact sales	Datasheet* More Details
	BW-HVH410-150-DOM	Dual	Purchase	Datasheet* More Details

*Datasheets are not available for all of the possible motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.

Parker

Designed for the demanding applications found in today’s high-performance electric and hybrid vehicles, Parker’s GVM (Global Vehicle Motor) Series of traction motors offer lower weight and higher power in a smaller package than other traction motors on the market.

GVM 142
The GVM 142 is Parker's newest motor designed for electric and hybrid vehicle applications. It includes a 142 mm frame size with an SAE-A adapter mount. It attains 95% efficiency and is compliant with SAE J1455 environmental standards. Typical applications include electric power steering, motor generator units, electric fans, etc.

Picture	Part Number	Webstore	Downloads	More Information
	GVM 142	Purchase	Datasheet	More Details

GVM 210
The GVM 210 Traction Motor is designed to meet the power requirements of a wide variety of vehicle applications. The GVM has the ability to operate at different bus voltages without loss of power. It achieves 95% efficiency.

Picture	Part Number	Webstore	Downloads	More Information
	GVM 210	Purchase	Datasheet	More Details

Yasa

Yasa P400

The YASA P400R series of motors/generators are manufactured using advanced materials and proprietary construction techniques to enable high-volume production with significant customer cost benefits.

Picture	Part Number	Webstore	Downloads
	YASA-P400RS-001	Purchase	Datasheet

Yasa 750R

The YASA 750R was developed as a low-speed, high-torque motor with leading torque and power densities. This motor is used in numerous industries and applications.

Picture	Part Number	Webstore	Downloads
	YASA-750-001	Purchase	Datasheet
	YASA-750-002	Purchase

Traction Inverters

New Eagle supplies a variety of inverters. If needed, New Eagle can help you choose the best inverter solution for your project. Please contact sales for more information.

John Deere

PD280 Single
Well suited for on- and off-highway industries, John Deere power inverters offer advanced motor control with flexible application software to optimize system performance. Inverter packaging options can help eliminate the need for multiple interfaces, enabling an effective system design approach.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD280S-PROTO	Purchase	Datasheet	More Details

PD280 Dual
Well suited for on- and off-highway industries, John Deere power inverters offer advanced motor control with flexible application software to optimize system performance. Inverter packaging options can help eliminate the need for multiple interfaces, enabling an effective system design approach.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD280D-PROTO	Purchase	Datasheet	More Details

PD400 Single
The PD400 Single Traction Inverter is based on high-performance DSP real-time embedded software to support advanced features such as field-oriented control. This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system delivers robust and reliable performance over the life of the system. The PD400 Single can produce 150-300kVA output power, depending on the configuration, and weighs 17.3 kg.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD400S-PROTO	Purchase	Datasheet	More Details

PD400 Dual

The PD400 Dual Traction inverter is based on high-performance DSP real-time embedded software to support advanced features such as field-oriented control. This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system delivers robust and reliable performance over the life of the system. The PD400 can produce 150-300kVA output power, depending on the configuration, and weighs 30.4 kg.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD400D-PROTO	Purchase	Datasheet	More Details

Sevcon

Note: It is highly recommended that the SEV-IXXAT-KIT be purchased with an inverter.

Sevcon GEN4-S4

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S4-80V	Purchase	Datasheet	More Details

Sevcon GEN4-S6

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S6-48V	Purchase	Datasheet	More Details
	SEV-GEN4-S6-80V	Purchase

SEV-GEN4-S8-001
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact, rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drivetrain system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S8-001	Purchase	Datasheet	More Details

SEV-GEN4-S10-001
The Gen4 size 10 AC motor controller is designed to meet the high-performance requirements of on-road and off-road electric and hybrid electric vehicles. Its high voltage range, up to 800VDC, is well matched to the needs of the automotive, agricultural and commercial transport markets. The same hardware platform handles both AC induction and permanent magnet AC motor technologies.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S10-001	Purchase	Datasheet	More Details

SEV-GEN5
The Gen5 range of motor controllers, which utilize a highly flexible control logic architecture to deliver a unique, feature-rich set of functions, is well matched to satisfy automotive, commercial and construction markets' electrification needs. The range of High Voltage/High Power (HVHP) controllers is specifically aimed at vehicle OEMs and system integrators to offer them a compact, lightweight, rugged and cost-effective class-leading suite of solutions covering traction, hybridization, power generation and sub-system electrification.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN5-S9-001	Purchase	Datasheet	More Details

SEV-HVLP-10 - Air Cooled
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of High Voltage/Low Power inverters designed for both on-road and off-road applications. The HVLP AC motor controllers work with permanent magnet and induction motors. A compact, rugged and cost-effective design, Sevcon’s HVLP inverter is well-suited for OEMs, hybrid/electric bus and truck conversions, agricultural OEMs, and EV system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-HVLP-10	Purchase	Datasheet	More Details

SEV-HVLP-20 - Water/Glycol Cooled
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of High Voltage/Low Power inverters designed for both on-road and off-road applications. The HVLP AC motor controllers work with permanent magnet and induction motors. A compact, rugged and cost-effective design, Sevcon’s HVLP inverter is well-suited for OEMs, hybrid/electric bus and truck conversions, agricultural OEMs, and EV system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-HVLP-20	Purchase	Datasheet	More Details

SEV-HVLP-IO - Harnesses
Harnesses for the Sevcon HVLP series.

Description	Part Number	Webstore	Downloads	More Information
HVLP Resolver I/O Harness, 4M	SEV-HVLP-IO-RES	Please contact sales	-	Please contact sales
HVLP SIN/COS I/O Harness, 4M	SEV-HVLP-IO-SIN	Please contact sales	-	Please contact sales
HVLP Induction I/O Harness, 4M	SEV-HVLP-IO-IND	Please contact sales	-	Please contact sales

SEVCON-IXXAT-KIT
SEV-IXXAT adapter harness with DVT software.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-IXXAT-KIT	Purchase	-	More Details

Cascadia Motion

The Cascadia Motion Systems (RMS) AC Traction Controllers are designed for on-road and off-road electric or hybrid electric vehicle applications.

The PM-Series, CM-Series and RM-Series families are typically the lightest and smallest inverters for their power due to their high heat flux thermal design approach. The company has extensive experience in automotive, commercial vehicles, motorsports and military vehicle traction applications.

RMS PM and CM Series

Part Number	Webstore	Downloads	More Information
RMS-PM100DX	Purchase	Datasheet	More Details
RMS-PM100DZ	Purchase
RMS-PM150DX	Purchase
RMS-PM150DZ	Purchase
RMS-CM200DX	Purchase
RMS-CM200DZ	Purchase
RMS-PM250DZ	Purchase

RMS RM Series

Part Number	Webstore	Downloads	More Information
RMS-RM100DX	Purchase	Datasheet	More Details
RMS-RM100DZ	Purchase	Datasheet	More Details

Inmotion

ACH high voltage motor controllers are designed for use in large electric or hybrid electric vehicles. The ACH is designed for voltage levels from 100V to 750V, with continuous power levels of up to 300kVA. With a rugged design and an expected lifetime of over 60,000 hours, the ACH is the ideal choice for both on-highway and off-highway applications.

Picture	Part Number	Webstore	Downloads	More Information
	IN-ACH65M30	Please contact sales	Datasheet	Please contact sales

Transmissions

BorgWarner

The BorgWarner 31-03 eGearDrive electric-drive transmission is the next generation of technology developed for adaptability across a broad range of applications for the emerging vehicle electrification market. The eGearDrive incorporates high-efficiency geartrain technology contributing to extended battery powered driving range and high torque capacity with greater than 97% efficiency.

Picture	Part Number	Webstore	Downloads	More Information
	BW-EGD-31-03-8.28	Purchase	Datasheet	Please contact sales

Heavy-Duty Transmissions

Electric Vehicle Transmission - Medium-Duty Fixed Rate Reducer

Picture	Part Number	Webstore	Downloads	More Information
	EVT1	Please contact sales	Datasheet	Please contact sales

Electric Vehicle Transmission - Medium Heavy-Duty 2-Speed with Reducer

Picture	Part Number	Webstore	Downloads	More Information
	EVT2-R	Please contact sales	Datasheet	Please contact sales

Electric Vehicle Transmission - Extra Heavy-Duty 2-Speed with Reducer/Spur Gear

Picture	Part Number	Webstore	Downloads	More Information
	EVT2-RHD	Please contact sales	Datasheet	Please contact sales

Electric Vehicle Transmission - Heavy-Duty 4-Speed

Picture	Part Number	Webstore	Downloads	More Information
	EVT4	Please contact sales	Datasheet	Please contact sales

Electric Drives

Saietta AFT140 eDrive

The AFT140i motor and integrated inverter offers peak power of 21kW at 48V (45kW at 96V) with 135Nm of peak torque. Transmission ratios are selectable between 3.48:1 and 11.36:1.

Picture	Part Number	Webstore	Downloads
	SAI-AFT140-EDRIVE-048	Purchase	More Details
	SAI-AFT140-EDRIVE-096	Purchase

HV Accessories

Onboard Chargers

Bel Power Solutions

15kW Inverter/Charger
The Bel Power Solutions 350INVCH150-120-240-xG is a 15kW inverter/charger that converts AC to DC voltages in charge mode and converts DC voltages to pure sine wave AC to power AC accessories. The liquid-cooled inverter/charger operates at 250-435VDC and 120/240VAC (50/60 Hz) split-phase. The inverter/charger powers up to 15kW in either direction. Features include very high efficiency, high reliability, low total harmonic distortion (AC), low output voltage noise (DC) and excellent dynamic response to load/input changes.

Picture	Part Number	Webstore	Downloads
	BEL-350INVCH150-120-240-xG	Please contact sales	Datasheet

22kW Inverter/Charger
The BCL25-700-8 is a 22kW liquid-cooled on-board battery charger that converts 3-phase AC voltage to DC voltage in electric or hybrid electric vehicles.

Picture	Part Number	Webstore	Downloads
	BEL-BCL25-700-8	Please contact sales	Datasheet

EDN

The EDN charger series is a very versatile, safe, high power density charger for on-board electric vehicle applications. With its flexible AC input port and constant power charging feature, it is a very effective charging system, compatible with all international power grids. It has been successfully tested to meet CE and E/e safety and performance standards.

Please complete the EDN form when purchasing.

Click Here

11kW EV011KA

Picture	Part Number	Webstore	Downloads
	EDN-EV011-KAR	Purchase	Datasheet

11kW EV011KL

Picture	Part Number	Webstore	Downloads
	EDN-EV011-KLR_*	Purchase	Datasheet

22kW EV022KL

Picture	Part Number	Webstore	Downloads
	EDN-EV022-KLR_*	Purchase	Datasheet

*Part numbers differ by voltage range.

DC-AC Inverters

Bel Power Solutions

400VDC to 120/240VAC Inverter
The Bel Power Solutions 350INV60-120-240-9G is a highly efficient DC/AC inverter that converts high-voltage DC power into split-phase AC power 120/240 VAC required to drive AC accessory loads directly from the High Voltage DC drive or battery bus. The liquid-cooled DC/AC inverter operates at input voltages from 240 to 430VDC and power ranges up to 6000W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis, and is a commercial off-the-shelf solution for electric vehicle manufacturers and developers.

Picture	Part Number	Webstore	Downloads
	BEL-350INV60-120-240-9G	Purchase	Datasheet

700VDC to 120/240VAC Inverter
The Bel Power Solutions 700INV60-120-240-9G is a highly efficient DC/AC inverter that converts high-voltage DC power into split-phase AC power 120/240VAC required to drive AC accessory loads directly from the High Voltage DC drive or battery bus. The liquid-cooled DC/AC inverter operates at input voltages from 400 to 850VDC and power ranges up to 6000W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis, and is a commercial off-the-shelf solution for electric vehicle manufacturers and developers.

Picture	Part Number	Webstore	Downloads
	BEL-700INV60-120-240-9G	Purchase	Datasheet

DC-DC Converters

Bel Power Solutions

4kW DC-DC Converters
The Bel Power Solutions DNC Series of 4kW DC/DC Converters creates DC voltages in hybrid and electric vehicles suitable to power low voltage accessories. The liquid-cooled or convection-cooled DC/DC converter operates at a wide range of input voltages and delivers power ranges up to 4000W/3300W (liquid/natural-cooled version). Features include very high efficiency (up to 93%), high reliability, low output voltage noise and excellent dynamic response to load/input changes.

Picture	Part Number	Webstore	Downloads	Connector Kits
	BEL-350DNC40-12-8G	Purchase	Datasheet	BEL-350DNC40-CON-KIT-8G (Includes Cable) - or - BEL-350DNC40-CON-KIT-9G
	BEL-350DNC40-12-CG	Purchase	Datasheet
	BEL-350DNC40-24-8G	Purchase	Datasheet
	BEL-350DNC40-24-CG	Purchase	Datasheet
	BEL-700DNC40-12-8G	Purchase	Datasheet	BEL-700DNC40-CON-KIT-8G (Includes Cable) - or - BEL-700DNC40-CON-KIT-9G
	BEL-700DNC40-12-CG	Purchase	Datasheet
	BEL-700DNC40-24-8G	Purchase	Datasheet
	BEL-700DNC40-24-CG	Purchase	Datasheet

Sevcon

Sevcon DC/DC Converters
The Sevcon 500W and 1.2kW DC/DC converters are suitable for all electrically powered vehicles and are designed to be fitted on board the vehicle and to be connected permanently to the battery. These fully encapsulated converters deliver a stable, isolated high power.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-80V-500W-001	Purchase	Datasheet	More Details
	SEV-GEN5-DCDC-001	Purchase	Datasheet	More Details

Ovartech

EV/HEV DC/DC Converter 1.5kW/1500W
The Ovartech range of DC/DC converters are suitable for a wide range of electrically powered vehicles and are specifically designed to be fitted on board the vehicle and connected permanently to the battery. This range of High Voltage DC/DC products is designed to satisfy the current trend to use higher battery voltages between 108VDC and 800VDC which are converted to lower voltages to power ancillary loads. Options include nominal 12VDC output, with exact output voltage set using a CAN communications command.

The products can satisfy a range of power requirements from 1kW to 12kW (when paralleled only). The High Voltage DC/DC range is designed to offer full performance across the temperature range of -40°C to +45°C (air-cooled) and -40°C to +65°C (liquid-cooled). It has many protection features, such as input UVLO, input OVLO, input reverse polarity, current limit, output short-circuit and over-temperature. The CAN communications features allow the units to be enabled and disabled with communications messages.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-DCDC-002	Purchase	Datasheet	-

Onboard Charger/DC-DC Converters

Ovartech OBC/DC-DC

6.6kW OBC + 1.5kW DC/DC Converter, Liquid-Cooled, 400V, 14VDC
This product is a combination high-frequency 6.6kW battery charger and 1.5kW DC/DC converter in one package. Integrating the high-frequency battery charger and DC/DC converter saves space, weight and cabling, thereby minimizing the cost of inventory, installation and service.

The Ovartech on-board charger series is designed for electric vehicle battery charging with a demand for efficiency, robustness and safety. The electrical input voltage for it ranges from AC 85-265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes charging more economical. It provides an intelligent charging mode that adjusts the voltage in CC/CV/cut-off automatically. It also features protection against short-circuits, over-voltage, under-voltage, over-current and over-temperature. The CAN-bus interface delivers messages with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System).

The Ovartech charger series is in compliance with SAE J1772 and IEC 61851 to meet international standards and with IP67 for the critical operating environments.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-OBC-DCDC-02	Purchase	Datasheet	-

Ovartech OBC/DC-DC/PDU

6.6kW OBC + 1kW DC-DC Converter, Liquid-Cooled + PDU

This product is a combination high-frequency battery charger, DC/DC converter and power distribution unit (PDU) in one package.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-OBC-DCDC-PDU-01	Purchase	Datasheet	-

Heating and Cooling

High Voltage Air Conditioning

Mitsubishi EVH33x E-Compressor

The Mitsubishi EVH33x E-Compressor is a high-voltage air compressor unit for EV and HEV applications. The EVH33x operates between 200-440VDC and has 34.3cc/rev of displacement. This electric air conditioning compressor communicates via LIN.

Picture	Part Number	Webstore	Downloads	More Information
	MI-EVH33x	Purchase	Please contact sales*	Specifications

Mitsubishi EV36BNKx E-Compressor

The Mitsubishi EV36BNKx E-Compressor is a high-voltage air compressor unit for EV and HEV applications. The EV36BNKx operates between 270-440VDC and has 36cc/rev of displacement.

Picture	Part Number	Webstore	Downloads	More Information
	EV36BNKx	Purchase	Please contact sales*	Specifications

*Datasheets available with non-disclosure agreement and direct contact with sales.

HV Pumps

Electro-Hydraulic Steering Unit

The Terzo Hydrapulse EHSU is a ruggedized electro-hydraulic pump unit with integrated motor, controller and closed-loop feedback that is specifically designed for mobile steering assist and e-steering applications.

Picture	Part Number	Webstore	Downloads
	TER-EHSU-2.5-U	Purchase	Datasheet
	TER-EHSU-10-U	Purchase

HVIL Isometers

Bender Isometers

High-Voltage Interlock Loop - The ISOMETER® monitors the insulation resistance between the active HV components of an electrical drive system (Un = DC 0V…600V) and the reference earth (chassis ground). The patented measurement technology is used to monitor the condition of the insulation on the DC side as well as on the AC motor side of the electrical drive system.

Picture	Part Number	Webstore	Downloads	More Information
	BEN-ISO175C-1	Purchase	Datasheet	Please contact sales
-	BEN-CONKIT-ISO175C-1	Purchase	Datasheet	Please contact sales

LV Accessories

Cooling Pumps

Oil Pumps

EMP OP 35

Picture	Part Number	Webstore	Downloads	More Information
	EMP-OP35-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales
	EMP-SERV-KIT-01	Please contact sales	Datasheet	Please contact sales

EMP OP 40i

Picture	Part Number	Webstore	Downloads	More Information
	EMP-OP40i-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

EMP OP 80C

Picture	Part Number	Webstore	Downloads	More Information
	EMP-OP80C-03 (24 volt)	Purchase	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales
	EMP-OP80C-02 (12 volt)	Purchase	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

EMP OP 40C

Picture	Part Number	Webstore	Downloads	More Information
	EMP-OP40C-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales
	EMP-OP40C-01NE	Purchase	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

EMP OP 3530C

Picture	Part Number	Webstore	Downloads	More Information
	EMP-OP3530C-01	Purchase	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

Water Pumps

EMP WP 32
This family of brushless water pumps are centrifugal pumps that operate with high efficiency, require low power consumption and have long service lives. These pumps are widely used in electric and hybrid buses, passenger cars, trains, ships and other vehicles utilizing heating and cooling circulation systems. The pump is part of New Eagle’s line of rugged, automotive-grade and production-ready hardware. With our validated, off-the-shelf components manufactured by some of the largest and most trusted manufacturers in the world, you can get your design up and running without expensive tooling or volume requirements.

Picture	Part Number	Webstore	Downloads	More Information
	EMP-WP32-01NE (12 volt)	Purchase	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales
	EMP-CONKIT-WP32-01 (6 Pin Kit)	Please contact sales	Datasheet
	EMP-WP32-02NE (24 volt)	Purchase	Datasheet
	EMP-CONKIT-WP32-02 (4 Pin Kit)	Please contact sales	Datasheet

EMP WP 120
The WP 120 is a high-performance, long-life, severe-duty electric water pump used in cooling systems in extreme environments. It can be used in off-road applications, power generation and large vehicle applications, including fuel cell, diesel, electric and other alternative fuel applications.

Picture	Part Number	Webstore	Downloads	More Information
	EMP-WP120-02H (24V, Horizontal)	Purchase	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

TK1 Thermal Kit

This product includes an F-11 electric fan, CM20 controller and a high-performance aluminum core radiator.

Picture	Part Number	Webstore	Downloads	More Information
	EMP-TK1	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

Displays

Electric Vehicle Display

The New Eagle Electric Vehicle Display uses a VeeCAN 320 HMI, pre-programmed with EV display software. The display easily integrates into your system and is already configured to display fundamental EV parameters, such as battery SOC, motor speed, drive mode and faults. Upon purchasing this EV display, you will receive a DBC file allowing you to integrate this device into your system with ease.

Picture	Part Number	Webstore	Downloads	More Information
	DISP-VC320L-EVS-01	Purchase	Downloads	More Details Display Examples

Raptor VeeCAN 700

A larger option to the VeeCAN 320 EV Display is the Raptor VeeCAN 700. This device is not pre-programmed with EV display software like VeeCAN 320 EV Display; however, users can choose to develop display software themselves using Raptor-Dev or hire New Eagle to develop custom display software for their application.

The Raptor VeeCAN 700 is a 7-inch color display wrapped in a rugged, environmentally-sealed enclosure. The Raptor VeeCAN 700 has two CAN channels for monitoring, data logging or transmitting commands from the display over the CAN bus. In relatively simple applications with only CAN-based sensors and actuators, the Raptor VeeCAN 700 can even act as a low-cost, all-in-one display/controller solution.

Picture	Part Number	Webstore	Downloads	More Information
	DISP-VC700-2003	Purchase	Datasheet Programming Guide Custom Data Logger Guide	More Details Display Examples

New Eagle offers a wide selection of Raptor HMIs for any system; view the Displays page for more information.

Specialty I/O Devices

Foot Pedals

New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power from two independent power supplies and output voltages between 0-5V and 0-2.5V. We also sell a connector kit for developing a harness that fits your needs. We have both firewall- and floor-mounted models.

Floor-Mounted Foot Pedal

Picture	Part Number	Webstore	Downloads	More Information
	EFP-136-01	Please contact sales	-	Schematics

Firewall-Mounted Foot Pedal

Picture	Part Number	Webstore	Downloads	More Information
	EFP-139-00	Please contact sales	-	Schematics

Pedal Emulator

PWM to Analog Converter (Pedal Emulator)

The New Eagle PWM to Analog Converter converts three separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.

Picture	Part Number	Webstore	Downloads	More Information
	PWM-AN-024-1403	Purchase	Datasheet	More Details

Power Distribution

Relay and Fuse Box

The New Eagle Multiplexed Power Distribution Module offers economical CAN network oversight for high-power circuits in vehicle power distribution. Manufactured as a hardened and weathertight module, it may be configured to provide various OEM circuit protection and switching functions using industry standard fuses, relays and breakers. The status and control of each circuit is accessible through J1939/CANopen messages.

Picture	Product Name	Part Number	Webstore	Downloads	More Information
	Multiplexed Power Distribution Module	MPDM-NE1	Purchase	Datasheets	More Details
		MPDM-31M-300-0	Purchase

Solid-State Relay Control Device

The CM0410 is a general-purpose input/output module that includes a single J1939 CAN interface, four inputs, one high-side current measurement pass-through and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus.

Picture	Part Number	Webstore	Downloads	More Information
	CM0410	Purchase	Datasheet Configuration Tool	More Details

Power Distribution Unit

HUBER+SUHNER has been developing high-quality solutions for distributing high voltage in electric vehicles for more than a decade. This solution withstands the roughest and harshest environments. The standard PDU is designed to save space and weight with its innovative, simple and compact housing. It is designed and equipped to work with a wide range of standardized components.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-HS-PDU-500V	Please contact sales	Datasheet	More Details
	ASM-HS-PDU-800V	Please contact sales	Datasheet	More Details

Manual Service Disconnect

The Manual Service Disconnect (MSD) offers a solution to safely remove an internal HV battery pack without short-circuiting it using a two-stage lever to open the HVIL circuit prior to separation of HV contacts.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-MSD-250A-001	Purchase	Downloads	-

Battery Management Interfaces

New Eagle CCS Fast Charge Interface

This vehicle-side interface is complaint to IEC 61851-1 and SAE J1772 Control Pilot Signaling. It enables manufacturers of AC and DC EV chargers to shorten time to market and minimize development effort.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-NE-CCS-001	Purchase	Datasheet	Please contact sales
	ASM-NE-CCS-002	Purchase	Datasheet	Please contact sales

J1772 Vehicle Power Interface Module

The New Eagle J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with an Electric or Plug-In Hybrid Electric (EV/PHEV) vehicle's charging equipment in accordance with the SAE J1772 specification.

Picture	Part Number	Webstore	Downloads	More Information
	VPIM-024-1301	Purchase	Downloads	More Details

Battery Systems

New Eagle offers battery products with BMS or the assistance to build a battery using an off-the-shelf or custom BMS.

Battery Management Systems

Integrated BMS System

New Eagle is pleased to offer a complete BMS solution with robust hardware and software designed to fulfill all of the necessary BMS functions. The offerings are expandable in series for a wide variety of cell chemistry and pack configurations and includes pre-wired harnesses.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-BMS-108-001 ASM-BMS-120-001 ASM-BMS-123-001	Purchase(108) Purchase(120) Please contact sales (123)	Datasheet Datasheet Please contact sales	More Details

Distributed BMS System

LiBAL s-BMS™ Interface Boards

This battery management system is capable of handling any scale system, adapting to all types of Li-ion batteries and, with a standard off-the-shelf design, it fits the project's needs without a redesign.

Benefits:

• Standard design
• Supports up to 256 cells
• Up to 1000VDC
• Embedded post-processing
• Electromagnetic immunity
• Vibration resistant
• 27 error modes

Picture	Part Number	Webstore	Downloads	More Information
	LIB-BMCU-001	Purchase	Datasheet	More Information
	LIB-LMU-001	Purchase	Datasheet

*Note: BMS requires management software (see below)

LiBAL s-BMS Harness Kits

Picture	Part Number	Webstore	Downloads	More Information
	LIB-HARNKIT-BMCU-01	Purchase	Please contact sales*	Upon Request: Harness Kit Layout User Manual* Please contact sales
	LIB-HARNKIT-LMU-01	Purchase	Please contact sales*

LiBAL s-BMS Shunt Kit

Picture	Part Number	Webstore	Downloads	More Information
	LIB-SHUNT-500A-C	Purchase	Please contact sales*	Upon Request: User Manual* Please contact sales
	LIB-SHUNT-300A-C	Purchase	Please contact sales*
	LIB-SHUNT-200A-C	Purchase	Please contact sales*

LiBAL s-BMS Heat Sink Kit

Picture	Part Number	Webstore	Downloads	More Information
-	LIB-LMU-HS-KIT	Purchase	Please contact sales*	Upon Request: User Manual* Please contact sales

LiBAL s-BMS Software

Picture	Part Number	Webstore	Downloads	More Information
	LIB-MGT-SW-001 Required for BMS	Purchase	Please contact sales*	Upon Request: User Manual* Please contact sales
	LIB-SRV-SW-001	Purchase	Please contact sales*

*Datasheets and user manuals are available with non-disclosure agreement and direct contact with sales.

Battery Cell Modules

New Eagle has strategic relationships with battery cell manufacturers and can participate with its customers on the design and sourcing of battery pack systems. One concept that has been successful is using off-the-shelf modules with one of our BMS options, enclosed in a housing made by either our engineering team or our customer's.

To discuss options, please contact sales@neweagle.net.

Discontinued Products

DC-AC Inverters

Bel Power

350VDC to 120/240VAC Inverter
The Bel Power Solutions 350INVCHGT150-120-240-8G is a 15 kW inverter/charger that converts AC to DC voltages in charge mode and converts DC voltages to pure sine wave AC in standalone or utility mode. In the standalone mode the inverter/charger could supply some AC accessories and in the utility mode is able to push energy back to the grid. The liquid cooled inverter/charger operates at 250-435 VDC and 120/240 VAC (50/60 Hz) split-phase. The inverter charger powers up to 15 kW in either direction. Features include very high efficiency, high reliability, low total harmonic distortion (AC), low output voltage noise (DC), and excellent dynamic response to load/input changes.

Picture	Part Number	Webstore	Downloads
	BEL-350INVCH240-120-240-8G	Purchase	-

Traction Inverters

Cascadia Motion Traction Inverters

The Cascadia Motion Systems (RMS) AC Traction Controllers are designed for on-road and off-road EV and HEV applications.

The PM-Series, CM-Series and RM-Series families are typically the lightest and smallest inverters for their power due to their high heat flux thermal design approach. The company has extensive experience in automotive, commercial vehicles, motorsports and military vehicle traction applications.

RMS PM Series

Part Number	Webstore	Downloads	More Information
RMS-PM250DX	-	Datasheet	More Details
RMS-PM500DZ	-	-

RMS RM Series

Part Number	Webstore	Downloads	More Information
RMS-RM-300DX	-	Datasheet	More Details
RMS-RM300DZ	-	Datasheet	More Details

John Deere Traction Inverters

JD-PD300
The PD300 Inverter is based on high-performance DSP real-time embedded software to support advanced features such as field-oriented control. This high-voltage, high-power module is designed to work at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system is liquid-cooled for robust and reliable performance over the life of the system.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD300	Please contact sales	Datasheet	More Details

John Deere PHO-PD300
The PD300 Traction Inverter is based on high performance DSP real-time embedded software to support advanced features such as field-oriented control. This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system delivers robust and reliable performance over the life of the system. The PD300 produces 200kVA output power and weighs 17 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD300-PROD	-	Datasheet	More Details

PHO-PD550 Dual
The PD550 Dual Traction Inverter is based on high performance DSP real-time embedded software to support advanced features such as field-oriented control. This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system delivers robust and reliable performance over the life of the system. The PD550 Dual produces 300kVA (x2 outputs) output power and weighs 64 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD550-PROD Dual	-	Datasheet	More Details

Power Distribution Units

New Eagle Power Distribution Unit
The New Eagle Power Distribution Unit (PDU) provides a solution to electric and hybrid electric vehicle high voltage distribution. It is environmentally sealed and designed for multiple output configurations. The PDU is designed to work with the low-side drivers of any New Eagle controller to provide easy integration and control.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-PDU-NE1	-	Datasheet	More Details

HUBER+SUHNER Power Distribution Unit

HUBER+SUHNER has been developing high-quality solutions for distributing high voltage in electric vehicles for more than a decade. This solution withstands the roughest and harshest environments. The standard PDU is designed to save space and weight with its innovative, simple and compact housing. It is designed and equipped to work with a wide range of standardized components.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-HS-PDU-500V	Please contact sales	Datasheet	More Details
	ASM-HS-PDU-800V	Please contact sales	Datasheet	More Details

Onboard Chargers

15kW Inverter/Charger

The 350INVCH150-120-240-8G is a 15kW inverter/charger that converts AC to DC voltages in charge mode and converts DC voltages to pure sine wave AC in standalone or utility mode. In the standalone mode, the inverter/charger could supply some AC accessories and, in the utility mode, is able to push energy back to the grid. The liquid-cooled inverter/charger operates at 250-435VDC and 120/240VAC (50/60 Hz) split-phase. The inverter charger powers up to 15kW in either direction.

Picture	Part Number	Webstore	Downloads
	BEL-350INVCH150-120-240-8G	Please contact sales	Datasheet

Motors

Saietta

The AFT140 product range combines patented, cutting-edge axial flux technology with the option of integrated inverters and transmissions to offer a state-of-the-art complete e-drive solution. Providing best-in-class torque and power density with exceptional efficiency, these devices enable increased vehicle performance with outstanding reliability.

Saietta AFT140i Motor and Integrated Controller

The AFT140i motor and integrated inverter/controller offers peak power of 21kW at 48V (45kW at 96V) with 135Nm of peak torque.

Picture	Part Number	Webstore	Downloads
	SAI-AFT140i-048	Purchase	More Details
	SAI-AFT140i-096	Purchase

Remy Motors (now BorgWarner)

Picture	Part Number	Winding Type	Webstore	More Information
	BW-HVH250-90-DWM	Dual	-	More Details Datasheets Accessories
	BW-HVH250-90-SWM	Serial	-
	BW-HVH250-115-SOC	Serial	-	More Details Datasheets
	BW-HVH250-90-SOC	Dual	-

Ovartech

Ovartech OBC/DC-DC

6.6kW OBC + 2kW DC-DC Liquid-Cooled
This Ovartech product is a combination high-frequency 6.6kW battery charger and 2kW DC/DC converter in one package. Integrating the high-frequency battery charger and the DC/DC converter saves space, weight and cabling, thereby minimizing the cost of inventory, installation and service.

The Ovartech on-board charger series is designed for electric vehicle battery charging with a demand for efficiency, robustness and safety. The electrical input voltage for it ranges from AC 85-265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes the charging more economical. The device provides intelligent charging mode which adjusts the voltage in CC/CV/cut-off automatically. It also features protection against short-circuits, over-voltage, under-voltage, over-current and over-temperature. The CAN-bus interface delivers messages with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System). The Ovartech charger series is in compliance with SAE J1772 and IEC 61851 to meet international standards and with IP67 for critical operating environment.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-OBC-DCDC-01	Please contact sales	Datasheet	-

Ovartech Chargers

On-board 6.6kW Liquid-Cooled Charger
The Ovartech 6.6kW on-board charger series is designed for electric vehicle battery charging with a demand for efficiency, robustness and safety. The electrical input voltage ranges from AC 85-265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes the charging more economical. It provides intelligent charging mode which adjusts the voltage in CC/CV/cut-off automatically. It also features protection against short-circuits, over-voltage, under-voltage, over-current and over-temperature. The CAN-bus interface delivers messages with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System). The Ovartech charger series is in compliance with SAE J1772 and IEC 61851 to meet international standard and with IP67 for critical operating environment.

Picture	Part Number	Webstore	Downloads
	OVAR-OBC-001		Datasheet

Delphi 12V, 2.2kW DC-DC Converter

We support many customers of the discontinued Delphi 2.2kW DC-DC Converter; therefore, we are keeping the datasheet and user manuals available for our customers.

Picture	Part Number	Webstore	Downloads	More Information
	Universal 2.2kW DC-DC Converter - Obsolete	Please contact sales	Datasheet Connector Drawing 3-D CAD (.stp) Drawing	More Details

LiBAL Fast Charge Interface

Compatible with nearly any Li-ion battery system, this vehicle-side interface is perfect for any quick charge solution.

• Available with optional CHAdeMO support
• Design is compact and easy to install
• Simple and cost effective
• Solution for EV projects

Picture	Part Number	Webstore	Downloads	More Information
	LIB-FCI-CHADEMO	Please contact sales	Datasheet	Please contact sales
	-		Datasheet GBT

Shinry Onboard Chargers

3.3kW Liquid-Cooled

Picture	Part Number	Webstore	Downloads	More Information
	(No longer available)	-	Datasheet	Please contact sales

6.6kW Liquid-Cooled with SAE 1772

Picture	Part Number	Webstore	Downloads	More Information
	(No longer available)	-	Datasheet	More Details

Shinry DC-DC Converter

Shinry 2kW DC-DC Converter
The Shinry 2kW DC-DC converter is designed for all types of electric vehicle applications. It is liquid-cooled and offers an efficiency up to 95%.

Picture	Part Number	Webstore	Downloads	More Information
	SHI-2KW-DC-01	-	Datasheet	More Details

High Voltage PTC Heating Unit

New Eagle offers a PTC (Positive Temperature Coefficient) heating unit for EV and HEV applications. It operates between 220 and 400VDC and has a heating capacity of 5kW at 334V, 360 L/h.

Picture	Part Number	Webstore	Downloads	More Information
	MI-EWH40DX	Please contact sales	Please contact sales	Specifications

UQM Motors

UQM's motors are sold as a package that includes a motor and inverter.

PowerPhase HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94% efficiency, these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 950 HD HiTor UQM-HD-950T	-	Datasheet	More Details

PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95% efficiency, these systems consist of a high performance, liquid-cooled, permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller. This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase Pro 100 UQM-PP-100	-	Datasheet	More Details
	PowerPhase Pro 135 UQM-PP-135	-

PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95% efficiency, these systems consist of a high performance, liquid-cooled, permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller. This package is ideal for medium- to heavy-duty trucks, buses, marine, locomotive, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 220 HD UQM-HD-220	-	Datasheets	More Details
	PowerPhase Pro 250 UQM-HD-250	-

*PowerPhase Pro 100/135 cable lengths are preset; only large volume orders include custom-length cables.

Current Ways Chargers

Picture	Part Number	Webstore	Downloads
	CW-6.6OBC-001	-	Datasheet

MAGELEC Gearboxes

MAGELEC Gearboxes

Picture	Part Number	Webstore	Downloads	More Information
	MAG-F03L-01	-	Datasheet	Please contact sales
	MAG-F03T-01	-	Datasheet	Please contact sales
	MAG-F06L-01	-	Datasheet	Please contact sales
	MAG-F06T-01	-	Datasheet	Please contact sales
	MAG-F06V-01	-	Datasheet	Please contact sales
-	MAG-F12L-01	-	-	Please contact sales

MAGELEC Motors

MAGELEC's full line of axial flux permanent magnet motors has been designed to deliver high torque and power density with high efficiency throughout the operating range.

MAGELEC M19

Picture	Part Number	Webstore	Downloads
	MAG-M19Px-S-19	-	Datasheet
	MAG-M19Px-D-19	-	Datasheet

MAGELEC M21

Picture	Part Number	Webstore	Downloads
	MAG-M21Px-S-21	-	Datasheet
	MAG-M21Px-D-21	-	Datasheet

MAGELEC M24

Picture	Part Number	Webstore	Downloads
	MAG-M24Px-S-24	-	Datasheet
	MAG-M24Px-D-24	-	Datasheet

MAGELEC M27

Picture	Part Number	Webstore	Downloads
	MAG-M27Px-S-27	-	Datasheet
	MAG-M27Px-x-27	-	Datasheet

MAGELEC M34

Picture	Part Number	Webstore	Downloads
	MAG-M34Px-S-34	-	-