Delphi
Delphi DC-DC Converter
Delphi Universal 2.2kW DC/DC Converter creates DC voltages in hybrid and electric vehicles necessary to power accessories and the HVAC system. Liquid-cooled, the DC-DC converter operates at input voltages from 216 to 422VDC with a power range to 2.2kW.
Benefits
- In production
- Proven automotive design, reliable even in the harsh environment of the engine compartment
- Highly efficient conversion using synchronous rectification
- Applicable to multiple vehicle platforms without re-engineering
Features
- Analog output voltage is adjustable through CAN serial communication; 11V – 15.5V
- Bi-directional capability supports charging of high-voltage battery
- Over-voltage, over-current, and over-temperature protection with fault reporting
- CAN serial interface
Connectors and Plug Description
CAN Bus Connector
High Voltage Connector
==>> 
HV Connector Change
As shown in the above figure, the circular HV connector has been changed to a square connector recently. The following are notes about the changes:
- Delphi's current HV connecter from Amphenol was selected by previous customers due to its use in other areas of their vehicle.
- Delphi-Packard (PED) has an existing HV header and mating connection system that has been applied by modifying the plastic body of the header. (ONLY)
- A small modification is required to the converter housing to accommodate the PED header connecter.
- The mating connecters are currently available from Packard
- Part Number for the Converter assembly with PED is: 28304007-01
General Specs
- Rated current - 12.7 A/15 A
- Voltage Level - 450 V (DC)
- Temperature Range - -40 deg C to +110 deg C
Contents of ASM-UNIV-HV-001
The connector kit provided by New Eagle would contain the LV connector, latest HV connector, ground lugs and ring terminal. Cable assembly is not a part of connector kit.