Raptor:LIN Rx Message
Return to the main Raptor page
Description
The LIN Rx Message block uses a frame definition from the LDF file associated with the LIN Bus definition block to receive and interpret the frame on the specified bus. The reception is scheduled according to the LIN frame schedule.
Outputs
| Output | Type | Description |
|---|---|---|
| Signal(s) | uint32 | Any signals from the .ldf for this message. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| LIN Bus Name | Provides the logic LIN bus name on which to receive. | |
| Frame | Identifies the frame that block will be configured to receive, the frames are defined in the LDF file associated with the named LIN Bus. | |
| Label wires with channel names | Checkbox | Enable this to automatically name the wires on the input ports with the names of the signals |
| Include Raw Outputs | Checkbox | Adds a port for each output signal providing the raw, unscaled bit value of the field. |
| Show Age Output | Checkbox | Adds a port indicating the age of the last receive message, count of subsystem executions. |