Raptor:Data Logging File EOF
Return to the main Raptor page
Description
This block tells whether or not the end of a file has been reached.
Valid hardware resources vary, but typically include a connected USB storage device, and the modules built-in non-volatile data flash memory.
As with many of the other datalogging and file I/O Raptor blocks, this block takes a file handle as an input, and propagates the same file handle through the block logic to an output of the block. By connecting the File Handle output of file I/O block 'X' to the File Handle input of file I/O block 'Y', application designers can ensure that the logic executed by block Y will be performed after the logic executed by block X.
Inputs
| Input | Type | Description |
|---|---|---|
| File Handle | File Handle | Specifies the file to check. |
Outputs
| Output | Type | Description |
|---|---|---|
| File Handle | File Handle | Outputs the File Handle provided on the input. |
| EOF? | boolean | Output indicates if the file position is at the end of the file. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Resource | Specify the resource which contains the file to check. |