Raptor:XCP Custom Security Seed/Key

Return to the main Raptor page

Return to Configuration page

Raptor™ XCP Custom Security Seed/Key

Description

This block is used when the XCP security method is set to 'Custom User Defined'. This block is used to set the seed and key used for an authentication. The seed and key can be any length from 1-255. This block must be located inside the function call subsystem connected to the raptor_xcp_custom_security_trigger block.

Inputs

Input	Type	Description
Seed	uint8[]	The seed to use when authenticating.
Key	uint8[]	The key to use when authenticating