ECM-S12-24
ECM-S12-24
Product Summary
These rugged embedded controllers are capable of operating in harsh automotive, marine, and off-highway application. Hundreds of successful industrial applications prove the capability of this module. Based on a proven microprocessor, it is capable of delivering complex control strategies. The CAN 2.0B datalink ensures interoperability with other system components.
- Features include:
- Freescale MC9S12DT128, 24MHz Microprocessor
- Operating Voltage: 8-16 VDC
- Operating temperature ranging between -40°C to 105°C
- Sealed connectors Operable to 10 ft. submerged
- Family includes:
- ECM-S12-24-0801
- ECM-S12-24-0802
- ECM-S12-24-0803
- ECM-S12-24-0804
Datasheets
Current Draw on the 24 pin family
Power draw should be the base below, plus power required for sensor inputs (from XDRP) and driven loads.
SECM08xx (PROD): approx. 100 mA at 13.8 V (key on, module-only, no external loads or sensors). SECM08xx (DEV) : approx. 270 mA at 13.8 V (key on, module-only, no external loads or sensors).
The above numbers are from a quick test here on-bench for the various modules, with a baseline "empty" application and with nothing but power, ground, and CAN connections. The SECM08xx (DEV) draws additional current, to drive the additional calibratible memory circuitry. This data comes from one SECM 24-pin DEV module.
ECM/GCM-S12-24 Part Number Changes
- The SECM0502 is obsolete, replaced by SECM0802. These modules are functionally equivalent.
- The SECM0503 is obsolete, replaced by SECM0801. These modules are functionally equivalent.
- The SECM0804 is a "made" part, created from an SECM0801 with a different general-purpose hardboot loader.
- The SECM0703 is obsolete, replaced by SECM0803.
- The SECM0703 is a "made" part, created from an SECM0503 module with a customer-specific hardboot loader.
- Likewise, the SECM0803 is a "made" part, created from an SECM0801 module with that same customer-specific hardboot loader.
Notes on the ECM-S12-24 part number migration
There is different hardboot software installed b, but the physical hardware is identical.
SECM0801 (SECM0503) "HB V1P2" hardboot CityID 129 = 0x81
SECM0804 "HB_4_3_RC1_PROD" hardboot CityID 11 = 0x0b
I am unfamiliar with differences between these two hardboot versions, except for the hardboot CityID.
The reason for the OEM part number changes, e.g. from SECM0503 to SECM0801, is typically due to changing internal components (replacing a transistor that is end-of-life with a new, equivalent, transistor) or similar issue. However, externally-visible functionality is expected to be the same: same ADC pull-up values, etc.
Thus, the inputs/outputs are the same for SECM0503 / SECM0801 and SECM0804.
We have Woodward part numbers for all products, but please work with the quote team to make sure you get what you need. Of course, the tech support team can help, as required.
Difference between ECM0502 and GCM0402
When the controllers shutdown, there is a difference in the way calibrations are stored. ECM does not have separate KeySw and Battery pins so there is no way the controller would know to save the calibrations before a shutdown. In this case, it would have to save these values periodically. Whereas in case of a GCM, there are two separate KeySw and Battery pins so the module can save Non Volatile data when a shutdown is commanded and then go to sleep.
Other Engine Control Modules
More Information: Engine Control Modules