Raptor-Dev-Data-Logging-Library

From NewEagleWiki
Revision as of 13:39, 4 April 2018 by 107.4.110.88 (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

New Eagle > Products Wiki > Raptor Platform > Raptor-Dev > Raptor-Dev Data Logging Library

Raptor™ Data Logging

The blocks in this subsystem...

Overview

These blocks are installed with Raptor-Dev by default and included in the 'Raptor Data Logging' block library shown in the Simulink Library Browser. They are included in the standard Raptor-Dev license.

For DISP-IMX286 targets, these blocks provide access to create/read/write files on the USB stick.

For HCM-5604-036-1303, the 'Data Log Read', 'Data Log Write', 'Data Log Erase' blocks provide access to the 8MB of onboard datalogging flash.

Blocks

Block Description Appearance
Erase

This block is used to erase a value from the data log.

Erase block
Erase block
Read

This block is used to read a value from the data log.

Read block
Read block
Write

This block is used to write a value to the data log.

Write block
Write block
USB Eject

When this block executes, all pending data to the USB drive is stored and the drive can be safely unmounted.

USB Eject block
USB Eject block
USB Status

This block shows the current status of the USB drive.

USB Status block
USB Status block
File Close

This block closes and opens a file and flushes all data written to the file system. All files should be closed before the module powers off to ensure data is not lost.

File Close block
File Close block
File EOF

This block is used to determine if the current file position is at the end of the file.

File EOF block
File EOF block
File Exists

This block can be used to detect if a file exists on the specified resource.

File Exists block
File Exists block
File Get Free Space

This block returns the free space on the specified resource.

File Get Free Space block
File Get Free Space block
Open File

This block opens a file for read and/or write. It outputs a file handle which is used with other blocks to read, write, and seek within the file.

Open File block
Open File block
File Position

This block is used to get the current file position measured in bytes from the start of the file.

File Position block
File Position block
Read File

This block is used to read the contents of a file.

Read File block
Read File block
Remove File

This block removes a file from the specified resource.

Remove File block
Remove File block
Rename File

This block is used to rename a file on a resource. It cannot be used to move a file between resources.

Rename File block
Rename File block
Seek File

This block is used to move the current position in a file where the next read or write operation will occur.

Seek File block
Seek File block
File Size

This block returns the size of the specified file in bytes.

File Size block
File Size block
File Sync

This block flushes all pending data writes to the flash file system.

File Sync block
File Sync block
Write File

This block is used to write data to a file. The block accepts uint8 or string data types.

Write File block
Write File block