Raptor:Fault Measurement

From NewEagleWiki
Revision as of 18:01, 13 September 2023 by Jwoytsek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Return to the main Raptor page

Return to Faults page

Raptor™ Fault Measurement

Description

This block behaves similar to the Raptor Measurement block and is used to display a value in the calibration tool. This block can be used to display the enumerated value of a fault index in the calibration tool. The proper enumeration definition will automatically be generated to convert the incoming fault index into the name of the fault.

Inputs

Input Type Description
Fault The fault to be displayed in the calibration tool.


Parameters

Parameter Type Description
Name String This is the name of that will appear in the calibration tool. The name must be a valid C identifier.
Help Text String Sets the help text that is displayed in the calibration tool.
Access Level Sets the access level of this item in the calibration tool.
Function String Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.