Raptor:Set Fault State

From NewEagleWiki
Revision as of 14:44, 14 September 2023 by Jwoytsek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Return to the main Raptor page

Return to Faults page

Raptor™ Set Fault State

Description

This block allows the individual states of faults to be set or cleared.

Inputs

Input Type Description
Inhibit boolean Inhibits the block from changing the state of the fault (must be enabled in parameters).
Fault The fault index of the fault to get the status of (only available in certain modes).
State boolean The new value of the state being set.

Parameters

Parameter Type Description
Fault Source Selects source of fault to get the status of.
Fault Name String This is the name of the fault to get the status of (only available in certain modes).
State The fault state to change.
Show Inhibit Port Enables the inhibit input port.