|
|
| (158 intermediate revisions by 9 users not shown) |
| Line 1: |
Line 1: |
| [[image:Telematics_RaptorPlatform.jpg|right|550px|thumb]] | | #REDIRECT [[Raptor-Telematics]] |
| =Introduction=
| |
| New Eagle has developed a MotoHawk and Raptor compatible telematics platform, which enables remote tracking and management of assets through GPS and cellular data technology. This system serves as gateway for remote administration of vehicles and data analysis. The New Eagle telematics platform can monitor and analyze driver behavior, measure fuel consumption, and detect maintenance issues with vehicles before they become a problem. The seamless integration between the New Eagle Telematics Control Module (TCM) and New Eagle ECUs also allows the option for remote calibration, reflashing of the ECU, and fault reporting.
| |
| | |
| New Eagle delivers a complete telematics solution including hardware, software, cellular plan, web server, and web portal interface.
| |
| | |
| [[Image:Telematics_Diagram.png|500px]]
| |
| | |
| The TCM is a standalone unit that can perform a multitude of functions from CAN data-aggregation and analytic processing to real-time vehicle monitoring through available Cell networks. It can communicate desired parameter information to a web-based portal. Compatibility with the MotoHawk and Raptor development environments provides close integration with CAN bus systems.
| |
| | |
| =Telematics Products=
| |
| | |
| ===Gold Telematics Kit (Basic)===
| |
| | |
| New Eagle's Gold Telematics Kit includes remote machine monitoring with its CAN and GPS logging capabilities. It logs up to 10 CAN messages, which are defined below. Data can be logged at 125kbaud, 250kbaud, or 500kbaud. You can also purchase a customized package if you require different messages. For more information, please '''[mailto:sales@neweagle.net Contact Sales]'''.
| |
| | |
| The remote diagnostics feature allows service personnel to monitor the status of deployed vehicles. The ECU broadcasts diagnostic information regarding the health and performance of the vehicle on the CAN bus. This information is logged by the telematics unit and submitted to the Fleet Web Server, where it can be viewed and queried.
| |
| | |
| When matched with an input controller, a customer will be able to capture, process, and send CAN data to the telematics unit very easily.
| |
| | |
| {|class="wikitable" cellpadding = "5"
| |
| | |
| !scope="col"|Part Number
| |
| !scope="col"|Picture
| |
| !scope="col"|'''[http://store.neweagle.net/ Visit our Webstore]'''
| |
| !scope="col"|Features
| |
| |-
| |
| |
| |
| ASM-TCM-C-G-(Z)
| |
| |
| |
| <gallery>file:Telematics_c4max.jpg</gallery>
| |
| |
| |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/new-eagle-gold-telematics-kit-with-low-5mb-data-year.html ASM-TCM-C-G-1]'''
| |
| | |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/new-eagle-gold-telematics-kit-with-5mb-data-year.html ASM-TCM-C-G-2]'''
| |
| | |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/new-eagle-gold-telematics-kit-with-15mb-data-year.html ASM-TCM-C-G-3]'''
| |
| |
| |
| *CAN logging configurable through DBC file
| |
| *Remote application update of the TCM
| |
| *Remote diagnostics
| |
| |}
| |
| | |
| ====Preset Messages====
| |
| The standard Gold telematics platform comes configured with the following messages.
| |
| | |
| {|class="wikitable" cellpadding = "5" style="text-align:center;"
| |
| |-
| |
| |colspan="2"|'''J1939 Messages'''
| |
| |-
| |
| !scope="col"|Message Name
| |
| !scope="col"|Parameter Group Name (PGN)
| |
| |-
| |
| |
| |
| Electronic Engine Controller 1 (EEC1)
| |
| |
| |
| 61444 (0x00F004)
| |
| |-
| |
| |
| |
| Electronic Transmission Controller 2 (ETC2)
| |
| |
| |
| 61445 (0x00F005)
| |
| |-
| |
| |
| |
| Electronic Engine Controller 2 (EEC2)
| |
| |
| |
| 61443 (0x00F003)
| |
| |-
| |
| |
| |
| Vehicle Distance (VD)
| |
| |
| |
| 65248 (0x00FEE0)
| |
| |-
| |
| |
| |
| High Resolution Vehicle Distance (VDHR)
| |
| |
| |
| 65217 (0x00FEC1)
| |
| |-
| |
| |
| |
| Cruise Control/Vehicle Speed (CCVS)
| |
| |
| |
| 65265 (0x00FEF1)
| |
| |-
| |
| |
| |
| Engine Temperature 1 (ET1)
| |
| |
| |
| 65262 (0x00FEEE)
| |
| |-
| |
| |
| |
| Liquid Fuel Economy (LFE)
| |
| |
| |
| 65266 (0x00FEF2)
| |
| |}
| |
| | |
| ====Set-Up Service====
| |
| The standard Gold telematics platform comes with 10 standard J1939 messages defined above. Many customers will want to define the message ID and formats of the data on the telematics device and server. In addition, the standard platform includes a login to the New Eagle back-end. The Set-up service includes a custom portal with customer logo.
| |
| | |
| ===Platinum Telematics Kit (Advanced)===
| |
| | |
| New Eagle's Platinum Telematics Kit is an add on of the Gold Kit. In addition to its CAN logging capabilities, this kit includes remote flashing and calibration capability. This feature allows the telematics unit to update the ECU without having to recall the vehicle from the field. The ECU has final authority to determine when it is safe for the ECU to be updated (the telematics unit will query the ECU periodically when it has an update operation to perform).
| |
| | |
| A part of the handshake protocol between the telematics unit and the ECU is a seed-key verification process that ensures that only authorized telematics units can perform an update on the ECU. Further, the calibration and reflash packages are signed with a private key, so that no unauthorized updates can performed. This signature is verified by the telematics unit upon download.
| |
| | |
| {|class="wikitable" cellpadding = "5"
| |
| | |
| !scope="col"|Part Number
| |
| !scope="col"|Picture
| |
| !scope="col"|'''[http://store.neweagle.net/ Visit our Webstore]'''
| |
| !scope="col"|Features
| |
| |-
| |
| |
| |
| ASM-TCM-C-P-(Z)
| |
| |
| |
| <gallery>file:Telematics_c4max.jpg</gallery>
| |
| |
| |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/new-eagle-platinum-telematics-kit-with-low-5mb-data-year-1.html ASM-TCM-C-P-1]'''
| |
| | |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/new-eagle-platinum-telematics-kit-with-5mb-data-yr-1.html ASM-TCM-C-P-2]'''
| |
| | |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/new-eagle-platinum-telematics-kit-with-15mb-data-year-1.html ASM-TCM-C-P-3]'''
| |
| |
| |
| *Remote flashing of MotoHawk and Raptor ECUs
| |
| *Remote calibration on MotoHawk and Raptor ECUs
| |
| *Fault freeze frame buffering
| |
| *CAN logging configurable through DBC file
| |
| *Remote application update of the TCM
| |
| *Remote diagnostics
| |
| |}
| |
| | |
| | |
| '''Product Notes
| |
| | |
| (Z) Data Storage Plan: Kits are sold with one of three data plans (1=0.5MB/Year, 2=5MB/Year, 3=15MB/Year)
| |
| | |
| There are a variety of harnesses available.
| |
| | |
| ====Set-Up Service====
| |
| The standard Platinum telematics platform comes with 10 standard J1939 messages defined above. Many customers will want to define the message ID and formats of the data on the telematics device and server. In addition, the standard platform includes a login to the New Eagle back-end. The Set-up service includes a custom portal with customer logo.
| |
| | |
| ===Harness - C4Max to J1939===
| |
| {|class="wikitable" cellpadding = "5"
| |
| | |
| !scope="col"|Part Number
| |
| !scope="col"|Picture
| |
| !scope="col"|'''[http://store.neweagle.net/ Visit our Webstore]'''
| |
| !scope="col"|More information
| |
| |-
| |
| |
| |
| NETM-HARN-C4-J1939
| |
| |
| |
| <gallery>File:NETM_HARN_C4_J1939.jpg</gallery>
| |
| |
| |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/harness-c4max-to-j1939.html NETM-HARN-C4-J1939]'''
| |
| |
| |
| Please '''[http://neweagle.net/contact/ Contact Us]'''
| |
| |}
| |
| | |
| ===Harness - C4Max to Smart Craft===
| |
| {|class="wikitable" cellpadding = "5"
| |
| | |
| !scope="col"|Part Number
| |
| !scope="col"|Picture
| |
| !scope="col"|'''[http://store.neweagle.net/ Visit our Webstore]'''
| |
| !scope="col"|More information
| |
| |-
| |
| |
| |
| NETM-HARN-C4-SC
| |
| |
| |
| <gallery>File:NETM_HARN_C4_SC.jpg</gallery>
| |
| |
| |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/harness-c4max-to-smart-craft-10-pin-f.html NETM-HARN-C4-SC]'''
| |
| |
| |
| Please '''[http://neweagle.net/contact/ Contact Us]'''
| |
| |}
| |
| | |
| ===Harness - C4Max to OBDII===
| |
| {|class="wikitable" cellpadding = "5"
| |
| | |
| !scope="col"|Part Number
| |
| !scope="col"|Picture
| |
| !scope="col"|'''[http://store.neweagle.net/ Visit our Webstore]'''
| |
| !scope="col"|More information
| |
| |-
| |
| |
| |
| NETM-HARN-C4-OBDII
| |
| |
| |
| <gallery>File:NETM_HARN_C4_OBDII.jpg</gallery>
| |
| |
| |
| '''[http://store.neweagle.net/products-by-category/telematics-and-data-loggers-1/harness-c4max-to-obd2-femail.html NETM-HARN-C4-OBDII]'''
| |
| |
| |
| Please '''[http://neweagle.net/contact/ Contact Us]'''
| |
| |}
| |
| | |
| =Capability Summary=
| |
| ===CAN Logging and Remote Diagnostics===
| |
| The TCM has CAN logging capabilities. It can log up to 10 CAN messages, which are configurable through DBC by the fleet manager. Data can be logged at 125kbaud, 250kbaud, or 500kbaud.
| |
| | |
| The remote diagnostics feature allows service personnel to monitor the status of deployed vehicles. The ECU broadcasts diagnostic information regarding the health and performance of the vehicle on the CAN bus. This information is logged by the telematics unit and submitted to the Fleet Web Server, where it can be viewed and queried.
| |
| | |
| Access to near-real-time data on the status and location of deployed vehicles can lead to substantially reduced maintenance costs:
| |
| :*Malfunctioning equipment can be identified quickly, before a catastrophic failure causes extensive damage to the vehicle.
| |
| :*Service techs can be dispatched with knowledge of what the problem is, reducing diagnostic time in the field.
| |
| :*Vehicle performance can be monitored and under-performing vehicles targeted for detailed analysis. This may lead to a recalibration or updates to the ECU software.
| |
| :*Driver behavior analysis can identify drivers in need of additional training.
| |
| | |
| ===Remote Calibration and Reflash===
| |
| This feature allows the telematics unit to update the ECU without having to recall the vehicle from the field. The ECU has final authority to determine when it is safe for the ECU to be updated (the telematics unit will query the ECU periodically when it has an update operation to perform).
| |
| | |
| A part of the handshake protocol between the telematics unit and the ECU is a seed-key verification process that ensures that only authorized telematics units can perform an update on the ECU. Further, the calibration and reflash packages are signed with a private key, so that no unauthorized updates can performed. This signature is verified by the telematics unit upon download.
| |
| | |
| ===Web Portal Interface===
| |
| New Eagle gives the ability to monitor and manage in the field products or vehicle fleets through a customizable web portal interface. The web interface allows the user to track vehicle locations and operational parameters in real time, set up alerts for malfunctioning equipment, manage vehicles across multiple job sites, and push updates to vehicles in the field. New Eagle provides custom login accounts for the distribution of access to OEM, distributors, and end users as required.
| |
| | |
| [[Image:Web Portal Screenshot Mockup.png|750px]]
| |
| | |
| ===Additional Features===
| |
| | |
| *3G GSM Cellular Data
| |
| *Stolen Vehicle Detection
| |
| *Data Logging:
| |
| :*Fuel Consumption
| |
| :*Vehicle Fault Codes
| |
| :*Vehicle Position (via GPS)
| |
| *Receive SMS alerts for critical events
| |
| | |
| The basic architecture of the system involves a TCM connected to the ECU via a CAN bus. The telematics unit can communicate via the cellular data network with a web server, which will collect data from the telematics unit and push updates for the unit and ECU.
| |
| | |
| Interested in telematics? Please fill out the '''[https://docs.google.com/forms/d/1Vd2XuyISHAha2ZYoScQ3BN_grd1CuDSkj1Fm67wQ2IA/viewform TCM selection form]'''.
| |
| =Hardware Summary=
| |
| ===Current Hardware===
| |
| The New Eagle telematics unit currently runs on the C4Max hardware.
| |
| | |
| Features include:
| |
| * Quad band cellular modem (SIM card with data plan included)
| |
| * GPS tracking
| |
| * 3-axis accelerometer
| |
| * CAN bus access
| |
| * ARM11 500 MHz processor
| |
| * 64 MB RAM
| |
| * 256 MB flash
| |
| * IP 54 (enclosure available at IP 65)
| |
| * Operating temperature -25°C to 75°C
| |
| | |
| ===Future Hardware===
| |
| '''TCM-557E-48-xxyy (TCM48 - In Development)
| |
| | |
| The TCM48 is ruggedized telematics module that will offer 2 CAN channels discrete IO on the vehicle side, and both cellular and Wi-Fi access on the remote side. It also has an expansion port for satellite communications. The hardware was designed for in-vehicle use with temperatures ranging from -40C to +85C.
| |
| | |
| New Eagle intends to incorporate this device into its telematics product offering in 2014.
| |
| | |
| {|class="wikitable" cellpadding = "5"
| |
| | |
| !scope="col"|Part Number
| |
| !scope="col"|Picture
| |
| !scope="col"|'''[http://store.neweagle.net/ Visit our Webstore]'''
| |
| !scope="col"|Datasheet
| |
| !scope="col"|More Information
| |
| |-
| |
| |style = "width: 20%"|
| |
| TCM-557E-48 (TCM48)
| |
| |style = "width: 20%"|
| |
| <gallery>
| |
| File:E600.jpg
| |
| </gallery>
| |
| |
| |
| Please contact [mailto:sales@neweagle.net sales]
| |
| |
| |
| [http://neweagle.net/support/wiki/docs/Datasheets/E600.pdf TCM-557E-48 (TCM48) datasheet]
| |
| |
| |
| Please contact [mailto:sales@neweagle.net sales]
| |
| |}
| |
| | |
| =Support=
| |
| Questions? Please [http://neweagle.net/contact Contact Us]
| |