Raptor:Output Status: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[ | [[Raptor-Platform|Return to the main Raptor page]] | ||
[[Raptor:Input & Output|Return to Input & Output page]] | [[Raptor:Input & Output|Return to Input & Output page]] | ||
| Line 45: | Line 45: | ||
! 9 | ! 9 | ||
| Under Voltage | | Under Voltage | ||
|} | |} | ||
| Line 82: | Line 74: | ||
| Specifies which input from the hardware is being read. | | Specifies which input from the hardware is being read. | ||
|} | |} | ||
Latest revision as of 20:44, 13 September 2023
Return to the main Raptor page
Description
This block shows the status of the selected output. On modules which support output diagnostics this block can show if an output is shorted or shutdown do to over current.
The following status codes have been defined, however not all status codes may be supported be each module or output.
| Value | Description |
|---|---|
| 0 | No Fault |
| 1 | Output On |
| 2 | Short Circuit Detected |
| 3 | Over Current Detected |
| 4 | Open Load Detected |
| 5 | Back Driven Detected
e.g. LSD grounded, HSD shorted to battery |
| 6 | No Supply Voltage |
| 7 | Possible Short Circuit Detected |
| 8 | Over Voltage |
| 9 | Under Voltage |
Outputs
| Output | Type | Description |
|---|---|---|
| Faulted | boolean | Shows the fault status of the selected resource. Ok = 0, Faulted = 1 |
| Status Code | uint8 | Shows more detailed fault status information on the output. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Hardware Resource | Specifies which input from the hardware is being read. |