KAntrak: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
No edit summary
 
(153 intermediate revisions by 17 users not shown)
Line 1: Line 1:
==CANtrak™ Embedded Display==
This product is End-Of-Life.  To see its replacement, click '''[[VeeCAN_320|here]]'''.
 
==KAntrak Embedded Display==


=== CANtrak will be renamed KANtrak to relect its ownership by Kongsberg Automotive ===
[[Image:CANtrak1.JPG]][[Image:CANtrak2.JPG]][[Image:CANtrak3.JPG]] <br />
[[Image:CANtrak1.JPG]][[Image:CANtrak2.JPG]][[Image:CANtrak3.JPG]] <br />
The CANtrak 2600 and 2610 are intelligent, multi-function displays. The ideal man-machine interface monitors numerous CAN based messages and displays the current status of user defined parameters. With its J1939 or custom CAN capability, the CANtrak offers easy integration into a CAN-based control system of MotoHawk® or 3rd party electronics for virtually any type of on-road or off-road vehicle.
The KAntrak 2700 and 2710 are series of intelligent, multi-function displays from Kongsberg Automotive. These ideal man-machine interfaces monitor numerous CAN-based messages and display the current status of user-defined parameters. With their J1939 or custom CAN capability, KAntraks offer easy integration into a CAN-based control system of MotoHawk or third-party electronics for virtually any type of on-road or off-road vehicle. They can also be combined with many other Kongsberg Automotive or MotoTron electronic products.


The CANtrak display is easily configured by New Eagle and via a Software Development Kit (SDK) - Allows full programming of the display using ‘C’ language. A wide range of mounting kits, wiring harnesses and other accessories are also available.
KAntrak displays are easily configured by New Eagle and via a Software Development Kit (SDK) - This allows for full programming of the display using the C language. A wide range of mounting kits, wiring harnesses and other accessories are also available. These displays are End of Life and are not recommended for new programs.  


*RS232, J1708/J1587 and CANbus datalink compatible
:'''Features include:'''
*Front and rear mountable (fitting kits required)
::*RS232, J1708/J1587 and CAN bus datalink compatible
*CE Approved design
::*Front and rear mountable (fitting kits required)
*Optional CSA Certified version - Class I, Division 2, Groups A, B, C, D
::*CE approved design
*Color version available soon
::*Optional CSA certified version - Class I, Division 2, Groups A, B, C, D


===Specification of Displays===
*'''[[How to program a BIN file into a KAntrak display]]'''


[http://www.neweagle.net/support/wiki/docs/CANtrak/CANtrak_Project_Specification_2Mar2010.doc CANtrak Specification of Displays]


== CANtrak Hardware Comments ==
View all New Eagle Displays '''[[Displays|here]]'''.
 
== KAntrak Hardware Comments ==


=== Audible Alarm Output ===
=== Audible Alarm Output ===
the 4 khz "audible alarm" is a single tone, volume device. In a noisy machine environment, the 2610 model has an open collector output for driving a relay, for an external horn, lights, ...
The 4 kHz audible alarm is a single-tone volume device. In a noisy machine environment, the 2710 model has an open collector output. It can be used to drive a relay for an external horn, lights, etc.


===Difference between CANtrak 2600 and CANtrak 2610===
===Difference Between KAntrak 2700 and KAntrak 2710===


CANtrak 2600 and CANtrak 2610 differ in temperature rating and the aux output. The CANtrak 2610 has extended temp, and is the Only version with an output (low side) to pull a relay, light, alarm.
KAntrak 2700 and KAntrak 2710 differ in temperature rating and aux output. The KAntrak 2710 has an internal heater for operation in lower temperatures and is the only version with an output (low-side) to pull a relay, light or alarm.


[http://www.neweagle.net/support/wiki/docs/CANtrak/KA-2600-2610.pdf CANtrak 2600-2610 Datasheet]
[[Image: CANtrak cold box test.jpg|thumb|right|KAntrak displays in a cold box at -38˚C]]
[[Image: CANtrak 2600 damage.jpg|thumb|right|KAntrak 2600 damage after cold box testing]]


==How to Establish a Connection to Program the CANtrak==
== How to Create a Program for the KAntrak ==   
 
There are three ways to get custom KAntrak programming.   
*Use Hyperterminal on the serial port with 57600 baud (8N1)
*With the device powered up, hold the left two buttons down until it shows the boot screen
*When you have Hyperterminal up hit Enter twice for the boot menu
*Option 2 lets you program, you want to send the file across using Transfer->Send File with 1K Xmodem in Hyperterminal
 
 
See Screenshots below:<br />
 
[[Image:CANtrakManual1.JPG]]<br />
 
[[Image:CANtrakManual2.JPG]]<br />
 
[[Image:CANtrakManual3.JPG]]<br />
 
== How to Create a Program for the CANtrak ==   
There are three ways to get custom CANtrak programming.   
      
      
=== Turn-key Displays ===
=== Software Development Tool Kit ===
 
New Eagle's Application Engineering team can develop the specification, write and test the software for your project.
 
=== The Software Development Tool Kit ===
   
The source code is available along with a starting point demo for application development. This package includes GEM lite, which incorporates many of the advanced functions of GEM including; selection of up to 8 languages, quad-screens, contrast and back lighting control, unit conversion, pop-up windows, and configuration menus. It also includes functions to read and display most J1939 data and an graphical library of symbols, gauges and text. 
   
=== [http://store.neweagle.net/ProductDetail.jsp?LISTID=80000207-1268413032 The CANtrak Configurable Display Module (CCDM)] ===
   
The CCDM allows the user to quickly display 29 bit or 11 bit data from the CAN bus on a variety of gauge styles on a CANtrak 2600 or CANtrak 2610 without the need for programming in software languages such as C or C++. 
      
      
Utilizing the Windows based PC Configuration tool, a non-software programmer can easily and quickly produce multiple screens of various styles of gauges without having to write even one line of code.
The source code is available along with a starting point demo for application development. This package includes GEM Lite, which incorporates many of the advanced functions of GEM, including selection of up to eight languages, quad-screens, contrast and back lighting control, unit conversion, pop-up windows, and configuration menus. It also includes functions to read and display most J1939 data and a graphical library of symbols, gauges and text.  


=== What compiler is used in the CANtrak SDK  ===
The SDK uses a Keil compiler, uVision2 V2.37.
The SDK uses a Kiel compiler, uVision2 V2.37.
   
   
[[Image:CANtrakCompiler.JPG]]
[[Image:CANtrakCompiler.JPG]]


== Generic Engine Monitor (GEM) Application for CANtrak==
New Eagle does not sell the Keil compiler, but you can find more information '''[http://www.keil.com/c166/ here]'''.
 
=== KAntrak Configurable Display Module (KCDM) ===
 
The KCDM (KAntrak Configurable Display Module) allows the user to quickly display 29-bit or 11-bit data from the CAN bus on a KAntrak 2700/2710 without the need for programming in software languages such as C or C++. Utilizing the Windows-based PC Configuration tool, a non-software programmer can easily and quickly produce multiple screens of various styles of gauges without having to write even one line of code.
 
:'''Features include:'''
::* Display up to 40 gauges
::* User-settable Internal Alarms per Parameter
::* External DM1 alarms
::* Choice of languages
::* Selectable Baud rate
::* CAN bus 29-bit or 11-bit mode
::* Customizable PGN request
::* Customizable buttons and start up logo/screen
 
:(Software Tool Supplied on CD ROM).  Compatible on Windows XP only (Sept 2010).  Not compatible with Windows 7.


===GEM CANtrak Manual===
The KCDM requires C6 version of the BIN to be '''[[How_to_program_a_BIN_file_into_a_CANtrak_display|programmed]]'''.  The MSI is an install file and isn't strictly necessary.  Make a KCDM folder on your c: root. Copy all the files there.
====KCDM Versions ====
There is only one version of KCDM, which programs both the 26xx and 27xx lines.  If you own an older KCDM for use with the 26xx displays, you are able to program the 27xx displays as well.


[http://www.neweagle.net/support/wiki/docs/CANtrak/GEM_manual(Current).pdf GEM Manual (Current)]
====More Information====
'''[http://www.neweagle.net/support/wiki/index.php?title=Displays#KAntrak_2700.2FCANtrak_7200 Click here]''' for more details.


===GEM CANtrak Datasheets===
== Applications of the CANtrak/KAntrak ==
[http://www.neweagle.net/support/wiki/index.php?title=Kongsberg_Automotive Click here for GEM CANtrak Datasheets]
=== Generic Engine Monitor (GEM) Application for KAntrak===


===GEM Binary===
For existing J1939 systems, New Eagle can provide displays that have a generic, J1939-compatible program that should work off-the-shelf. This application shows common parameters (RPM, oil pressure, etc.) as well as DM1 faults. You can get an idea of the capability of this application by reading the GEM Manual or GEM KAntrak Datasheet. If you have already purchased a KAntrak, you may '''[http://www.neweagle.net/contact/ request the GEM Binary]'''.


[http://www.neweagle.net/contact.html Please Request the GEM Binary]
=== J1587 to J1939 Converter ===
The KAntrak (26xx/27xx) hardware has both serial and CAN communication channels. One common application is as a converter from J1587 to/from J1939 or other CAN protocol to integrate older (pre-CAN) products with newer controls and communications.


== CANtrak Configurable Display Module (CCDM) Software ==
We will need a list of messages to convert and protocols (J1939, NMEA2000, GMLAN, ...) to quote this converter.   You also get a configurable display as a bonus.
Installation Issue - "The manual says that there should be an installer "CCDM PC Tool.msi" but there no msi in the zip file.  


The manual also says that we have to flash the CANtrak unit with a firmware upgrade ("C6") before using the tool to configure it, but the C6 binary isn't included either."
=== System Monitor ===
This multi-purpose display can act as a system monitor, as well as interact with the actuators through the controller or change parameters or calibrations within the controller with the press of a button.


Answer - CCDM requires C6 version of the BIN to be programed. Also, the MSI is an install file and you don't really need it. Make a CCDM folder on your c: root. Copy all the files there.
==Downloads==
*'''KANtrak 2700/CANtrak 7200'''
:'''[http://www.Neweagle.net/support/wiki/ProductDocumentation/Displays/Kantrak%202700/KA-2700-2710.pdf Datasheet]'''
:'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Displays/Kantrak%202700/kantrack_cad_file.zip 3D CAD Drawing]'''
:'''[http://Neweagle.net/support/wiki/ProductDocumentation/Displays/Kantrak%202700/ASM-GEM-KANtrak%202700-2710_UserManual.pdf KAntrak GEM Manual]'''


== Purchase CANtrak ==
*'''KANtrak 2710'''
:'''[http://www.Neweagle.net/support/wiki/ProductDocumentation/Displays/Kantrak%202710/KA-2700-2710.pdf Datasheet]'''
:'''[http://www.Neweagle.net/support/wiki/ProductDocumentation/Displays/Kantrak%202710/ASM-GEM-KANtrak%202700-2710_UserManual.pdf KAntrak GEM Manual]'''


*[http://store.neweagle.net/ProductDetail.jsp?LISTID=800001C7-1259631854 Purchase CANtrak 2600]
*'''KANtrak 2710 CSA'''
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000055-1254758125 Purchase CANtrak 2610]
:'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Displays/Kantrak%202700/KA-2700-2710.pdf Datasheet]'''
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000215-1273193470 Purchase CANtrak 2610 CSA Certified]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=800001C0-1257284946 Purchase CANtrak Behind-Dash Mounting Bracket Kit]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000208-1268413101 Purchase CANtrak Configurable Input Harness]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000206-1268412967 Purchase CANtrak Configurable Module]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000207-1268413032 Purchase CANtrak Configurable Module Tool]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=8000020A-1268413269 Purchase CANtrak Connector Mating Kit]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000205-1268412867 Purchase CANtrak Deutsch Connector Kit]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000056-1254758507 Purchase CANtrak Display Power Harness]
*[http://store.neweagle.net/ProductDetail.jsp?LISTID=80000203-1268412660 Purchase CANtrak GEM Software]

Latest revision as of 18:32, 30 January 2023

This product is End-Of-Life. To see its replacement, click here.

KAntrak Embedded Display


The KAntrak 2700 and 2710 are series of intelligent, multi-function displays from Kongsberg Automotive. These ideal man-machine interfaces monitor numerous CAN-based messages and display the current status of user-defined parameters. With their J1939 or custom CAN capability, KAntraks offer easy integration into a CAN-based control system of MotoHawk or third-party electronics for virtually any type of on-road or off-road vehicle. They can also be combined with many other Kongsberg Automotive or MotoTron electronic products.

KAntrak displays are easily configured by New Eagle and via a Software Development Kit (SDK) - This allows for full programming of the display using the C language. A wide range of mounting kits, wiring harnesses and other accessories are also available. These displays are End of Life and are not recommended for new programs.

Features include:
  • RS232, J1708/J1587 and CAN bus datalink compatible
  • Front and rear mountable (fitting kits required)
  • CE approved design
  • Optional CSA certified version - Class I, Division 2, Groups A, B, C, D


View all New Eagle Displays here.

KAntrak Hardware Comments

Audible Alarm Output

The 4 kHz audible alarm is a single-tone volume device. In a noisy machine environment, the 2710 model has an open collector output. It can be used to drive a relay for an external horn, lights, etc.

Difference Between KAntrak 2700 and KAntrak 2710

KAntrak 2700 and KAntrak 2710 differ in temperature rating and aux output. The KAntrak 2710 has an internal heater for operation in lower temperatures and is the only version with an output (low-side) to pull a relay, light or alarm.

KAntrak displays in a cold box at -38˚C
KAntrak 2600 damage after cold box testing

How to Create a Program for the KAntrak

There are three ways to get custom KAntrak programming.

Software Development Tool Kit

The source code is available along with a starting point demo for application development. This package includes GEM Lite, which incorporates many of the advanced functions of GEM, including selection of up to eight languages, quad-screens, contrast and back lighting control, unit conversion, pop-up windows, and configuration menus. It also includes functions to read and display most J1939 data and a graphical library of symbols, gauges and text.

The SDK uses a Keil compiler, uVision2 V2.37.

New Eagle does not sell the Keil compiler, but you can find more information here.

KAntrak Configurable Display Module (KCDM)

The KCDM (KAntrak Configurable Display Module) allows the user to quickly display 29-bit or 11-bit data from the CAN bus on a KAntrak 2700/2710 without the need for programming in software languages such as C or C++. Utilizing the Windows-based PC Configuration tool, a non-software programmer can easily and quickly produce multiple screens of various styles of gauges without having to write even one line of code.

Features include:
  • Display up to 40 gauges
  • User-settable Internal Alarms per Parameter
  • External DM1 alarms
  • Choice of languages
  • Selectable Baud rate
  • CAN bus 29-bit or 11-bit mode
  • Customizable PGN request
  • Customizable buttons and start up logo/screen
(Software Tool Supplied on CD ROM). Compatible on Windows XP only (Sept 2010). Not compatible with Windows 7.

The KCDM requires C6 version of the BIN to be programmed. The MSI is an install file and isn't strictly necessary. Make a KCDM folder on your c: root. Copy all the files there.

KCDM Versions

There is only one version of KCDM, which programs both the 26xx and 27xx lines. If you own an older KCDM for use with the 26xx displays, you are able to program the 27xx displays as well.

More Information

Click here for more details.

Applications of the CANtrak/KAntrak

Generic Engine Monitor (GEM) Application for KAntrak

For existing J1939 systems, New Eagle can provide displays that have a generic, J1939-compatible program that should work off-the-shelf. This application shows common parameters (RPM, oil pressure, etc.) as well as DM1 faults. You can get an idea of the capability of this application by reading the GEM Manual or GEM KAntrak Datasheet. If you have already purchased a KAntrak, you may request the GEM Binary.

J1587 to J1939 Converter

The KAntrak (26xx/27xx) hardware has both serial and CAN communication channels. One common application is as a converter from J1587 to/from J1939 or other CAN protocol to integrate older (pre-CAN) products with newer controls and communications.

We will need a list of messages to convert and protocols (J1939, NMEA2000, GMLAN, ...) to quote this converter. You also get a configurable display as a bonus.

System Monitor

This multi-purpose display can act as a system monitor, as well as interact with the actuators through the controller or change parameters or calibrations within the controller with the press of a button.

Downloads

  • KANtrak 2700/CANtrak 7200
Datasheet
3D CAD Drawing
KAntrak GEM Manual
  • KANtrak 2710
Datasheet
KAntrak GEM Manual
  • KANtrak 2710 CSA
Datasheet