MotoHawk-Module-Harnesses-and-Connectors: Difference between revisions
(248 intermediate revisions by 7 users not shown) | |||
Line 1: | Line 1: | ||
{{DISPLAYTITLE: MotoHawk Module Harness and Connectors}} | {{DISPLAYTITLE: MotoHawk Module Harness and Connectors}} | ||
= | {| | ||
==Pigtail Harness | |style = "width:850px;"| | ||
A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM | =Introduction= | ||
'''- Pigtail Harness: ''' | |||
A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM. | |||
'''- Development Harness: ''' | |||
Development | Development harnesses are pigtail harnesses with power, ground, key-switch and communication wired. The harness is also covered in loom. | ||
'''- Boot Harness: ''' | |||
A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file flashed onto the module | A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file will be flashed onto the module. | ||
'''- Programming Harness: ''' | |||
A programming harness contains only the necessary connections to communicate with and flash the module. This includes Battery, Ground, Wake_Input1 (KeySW), and CAN1+/-. | |||
'''- Simulator Harness: ''' | |||
Simulator | Simulator harnesses are used in conjunction with a Desk Top Simulator. | ||
=24- | =24-Pin MotoHawk Module= | ||
==24- | ==24-Pin Module Connectors== | ||
Please note that cavity plugs are not used on the connector kits. [http://www.neweagle.net/support/wiki/docs/24%20Pin%20Female%20Harness%20connector.pdf Overview of 24- | Please note that cavity plugs are not used on the connector kits. '''[http://www.neweagle.net/support/wiki/docs/24%20Pin%20Female%20Harness%20connector.pdf Overview of 24-Pin Connector]''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 27: | Line 30: | ||
|- | |- | ||
|[[File:ASM-CON-004-00.jpg|150px]] | |[[File:ASM-CON-004-00.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (35)Terminals 20AWG <br/>(1)Connector<br/>(1) Black Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief | |Connector Kit includes: <br/><br/> (35) Terminals 20AWG <br/>(1) Connector<br/>(1) Black Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief | ||
|ASM-CON-004 | |ASM-CON-004 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecms12-24/ Purchase]''' | ||
|- | |- | ||
|[[File:ASM-CON-006-00.jpg|150px]] | |[[File:ASM-CON-006-00.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (35)Terminals 20AWG <br/>(1)Connector<br/>(1) Clear Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief | |Connector Kit includes: <br/><br/> (35) Terminals 20AWG <br/>(1) Connector<br/>(1) Clear Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief | ||
|ASM-CON-006 | |ASM-CON-006 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-gcms12-24/ Purchase]''' | ||
|- | |- | ||
|[[File: | |[[File:CON-TMPL-004 (002).jpg|150px]] | ||
|Terminals 20AWG | |Terminals 20AWG | ||
|CON-TMFL-034-00 | |CON-TMFL-034-00 | ||
| | | | ||
|- | |- | ||
Line 47: | Line 50: | ||
|Female Connector | |Female Connector | ||
|CON-FEML-035-00 | |CON-FEML-035-00 | ||
| | | | ||
|- | |- | ||
Line 53: | Line 56: | ||
|Black Retainer | |Black Retainer | ||
|CON-LOCK-013-00 | |CON-LOCK-013-00 | ||
| | | | ||
|- | |- | ||
Line 59: | Line 62: | ||
|Clear Retainer | |Clear Retainer | ||
|CON-LOCK-016-00 | |CON-LOCK-016-00 | ||
| | | | ||
|- | |- | ||
Line 65: | Line 68: | ||
|Connector Position Assurance (CPA) | |Connector Position Assurance (CPA) | ||
|CON-LOCK-022-00 | |CON-LOCK-022-00 | ||
| | | | ||
|- | |- | ||
Line 71: | Line 74: | ||
|Cable Seal | |Cable Seal | ||
|CON-SEAL-011-00 | |CON-SEAL-011-00 | ||
| | | | ||
|- | |- | ||
Line 77: | Line 80: | ||
|Strain Relief | |Strain Relief | ||
|CON-STRN-003-00 | |CON-STRN-003-00 | ||
| | | | ||
|} | |} | ||
==24- | ==24-Pin Module Pigtail Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 92: | Line 95: | ||
|Pigtail Harness for GCM S12-24 | |Pigtail Harness for GCM S12-24 | ||
|HARN-MCHI-001-DO | |HARN-MCHI-001-DO | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-mchi-12-ft-pigtail-gcm-s12-24/ Purchase]''' | ||
|- | |-https://store.neweagle.net/product/pigtail-harness-for-s12-24/ | ||
|[[File:Harn-secm-004-d0.jpg|150px]] | |[[File:Harn-secm-004-d0.jpg|150px]] | ||
|Pigtail Harness for S12-24 | |Pigtail Harness for S12-24 | ||
|HARN-SECM-004-DO | |HARN-SECM-004-DO | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/pigtail-harness-for-s12-24/ Purchase]''' | ||
|} | |} | ||
==24- | ==24-Pin Module Programming and Boot Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 111: | Line 114: | ||
|- | |- | ||
|[[File:HARN-SECM-012-00.jpg|150px]] | |[[File:HARN-SECM-012-00.jpg|150px]] | ||
|Quick Programming Cable for S12 | |Quick Programming Cable for ECM-S12-24 only | ||
|HARN-SECM-012-00 | |HARN-SECM-012-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/quick-programming-cable-for-s12-module/ Purchase]''' | ||
|- | |- | ||
|[[File:Harn-secm-005d1.jpg|150px]] | |[[File:Harn-secm-005d1.jpg|150px]] | ||
|Boot | |Boot Harness for ECM-S12-24 Module | ||
|HARN-SECM-005-D1 | |HARN-SECM-005-D1 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-secm-bootstrap-for-ecm-s12-24/ Purchase]''' | ||
|} | |} | ||
=48- | =48-Pin MotoHawk Module= | ||
==48- | ==48-Pin Module Connectors== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 134: | Line 137: | ||
|- | |- | ||
|[[File:Asm-con-002-00-e.jpg|150px]] | |[[File:Asm-con-002-00-e.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (55)Terminals 18-20AWG <br/>(1)Connector (A Key) <br/>(1)Connector (B Key)<br/>(48) Plugs <br/>(2) Covers | |Connector Kit includes: <br/><br/> (55) Terminals 18-20AWG <br/>(1) Connector (A Key) <br/>(1) Connector (B Key)<br/>(48) Plugs <br/>(2) Covers | ||
|ASM-CON-002-00 | |ASM-CON-002-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm-gcm-hcm-48/ Purchase]''' | ||
|- | |- | ||
Line 142: | Line 145: | ||
|Terminals 18-20AWG | |Terminals 18-20AWG | ||
|CON-TMFL-002-00 | |CON-TMFL-002-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-001a-00-e.jpg|150px]] | |[[File:Con-feml-001a-00-e.jpg|150px]] | ||
|24- | |24-Channel Connector (A Key) | ||
|CON-FEML-001A-00 | |CON-FEML-001A-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-001a-00-e.jpg|150px]] | |[[File:Con-feml-001a-00-e.jpg|150px]] | ||
|24- | |24-Channel Connector (B Key) | ||
|CON-FEML-001B-00 | |CON-FEML-001B-00 | ||
| | | | ||
|- | |- | ||
Line 160: | Line 163: | ||
|Connector Plug | |Connector Plug | ||
|CON-PLUG-002-00 | |CON-PLUG-002-00 | ||
| | | | ||
|- | |- | ||
Line 166: | Line 169: | ||
|Connector Cover | |Connector Cover | ||
|CON-COVR-001A-01 | |CON-COVR-001A-01 | ||
| | | | ||
|} | |} | ||
==48- | ==48-Pin Module Pigtail Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 179: | Line 182: | ||
|- | |- | ||
|[[File:Harn-ecm-004.jpg|150px]] | |[[File:Harn-ecm-004.jpg|150px]] | ||
|Pigtail Harness for ECM/GCM/HCM 48 | |Pigtail Harness for ECM/GCM/HCM 48-Pin | ||
|HARN-ECM-004-D0 | |HARN-ECM-004-D0 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|} | |} | ||
==48- | ==48-Pin Module Programming and Boot Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:100px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 194: | Line 197: | ||
|[[File:Harn-ecm-012.jpg|150px]] | |[[File:Harn-ecm-012.jpg|150px]] | ||
|Quick Programming Cable for ECM 555-48 Module | |Quick Programming Cable for ECM 555-48 Module | ||
|HARN-ECM-012 | |HARN-ECM-012 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |- | ||
|[[File:Harn-ecm-013.jpg|150px]] | |[[File:Harn-ecm-013.jpg|150px]] | ||
|Boot and Quick Programming Cable for ECM 563-48 Module | |Boot and Quick Programming Cable for ECM 563-48 Module | ||
|HARN-ECM-013 | |HARN-ECM-013 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/boot-and-quick-programming-cable-for-ecm-563-48/ Purchase]''' | ||
|- | |- | ||
|[[File:Harn-ecm-022.jpg|150px]] | |[[File:Harn-ecm-022.jpg|150px]] | ||
|Boot Cable for GCM 563-48 Module | |Boot Cable for GCM 563-48 Module | ||
|HARN-ECM-022 | |HARN-ECM-022 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/boot-cable-gcm-563-48/ Purchase]''' | ||
|- | |- | ||
|[[File:HARN-PROG-009.jpg|150px]] | |[[File:HARN-PROG-009.jpg|150px]] | ||
|Quick Programming Cable for GCM/HCM 48 (a.k.a. | |Quick Programming Cable for GCM/HCM 48 (a.k.a. Fire 48) | ||
|HARN-PROG-009 | |HARN-PROG-009 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/gcm-hcm-48-fire48-quick-programming-harness/ Purchase]''' | ||
|} | |} | ||
==48- | ==48-Pin Module Development Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"| | !scope="col" style = "width:150px;"|Webstore | ||
|- | |- | ||
|[[File:Harn-ecm-014.jpg| | |[[File:Harn-ecm-014.jpg|140px]] | ||
|Development Harness GCM/HCM 563-48 Module | |Development Harness GCM/HCM 563-48 Module | ||
|HARN-ECM-014 | |HARN-ECM-014 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |- | ||
|[[File:Harn-ecm-027.jpg|150px]] | |[[File:Harn-ecm-027.jpg|150px]] | ||
|Development Harness for ECM 563-48 Module | |Development Harness for ECM 563-48 Module | ||
|HARN-ECM-027 | |HARN-ECM-027 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |- | ||
|[[File:Harn-ecm-007.jpg|150px]] | |[[File:Harn-ecm-007.jpg|150px]] | ||
|Development Harness for 555-48 Module | |Development Harness for 555-48 Module | ||
|HARN-ECM-007-00 | |HARN-ECM-007-00 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|} | |} | ||
==48- | ==48-Pin Simulator Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 247: | Line 250: | ||
|- | |- | ||
|[[File:HARN-INTR-024B.jpg|150px]] | |[[File:HARN-INTR-024B.jpg|150px]] | ||
|Simulator Harness for ECM | |Simulator Harness for 48-Pin ECM | ||
Simulator Harness for 48-Pin GCM/HCM | |||
|HARN-INTR-024B | |HARN-INTR-024B | ||
|'''[ | HARN-INTR-024C | ||
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-48-pin-ecm/ Purchase]''' | |||
'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-motohawk-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-48-pin-gcm-hcm/ Purchase]''' | |||
|} | |} | ||
=70 Pin Module= | =70-Pin MotoHawk Module= | ||
==70- | ==70-Pin Module Connectors== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
|- | |- | ||
|[[File:ASM-CON-046. | |[[File:ASM-CON-046 PIC.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (80) 0.63mm Terminals 18-20AWG <br/>(8) 1.5mm Terminals 18-20AWG <br/>(1) Female Connector <br/>(15) 0.63mm | |Connector Kit includes: <br/><br/> (80) 0.63mm Terminals 18-20AWG <br/>(8) 1.5mm Terminals 18-20AWG <br/>(1) Female Connector <br/>(15) 0.63mm Plugs <br/>(5) 1.5mm Plugs <br/>(1) Cover | ||
|ASM-CON-046 | |ASM-CON-046 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-gcm70-general-control-module/ Purchase]''' | ||
|- | |- | ||
Line 272: | Line 278: | ||
|0.63mm Terminals 18-20AWG | |0.63mm Terminals 18-20AWG | ||
|CON-TMFL-054-00 | |CON-TMFL-054-00 | ||
| | | | ||
|- | |- | ||
|[[File:Image_678.jpg|150px]] | |[[File:Image_678.jpg|150px]] | ||
|1.5mm Terminals 18-20AWG | |1.5mm Terminals 18-20AWG | ||
|CON-TMFL-055-00 | |CON-TMFL-055-00 | ||
| | | | ||
|- | |- | ||
|[[File:Image673.jpg|150px]] | |[[File:Image673.jpg|150px]] | ||
|70- | |70-Channel Connector | ||
|CON-FEML-056-00 | |CON-FEML-056-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-plug-063-org.jpeg|150px]] | |[[File:Con-plug-063-org.jpeg|150px]] | ||
|0.63mm | |0.63mm Plugs | ||
|CON-PLUG - . | |CON-PLUG - .63 MM 112-Pin | ||
| | | | ||
|- | |- | ||
|[[File:Con-plug-15-org.jpeg|150px]] | |[[File:Con-plug-15-org.jpeg|150px]] | ||
|1.5mm | |1.5mm Plugs | ||
|CON-PLUG- 1. | |CON-PLUG- 1.5 MM 12-Pin | ||
| | | | ||
|- | |- | ||
Line 301: | Line 306: | ||
|Connector Cover | |Connector Cover | ||
|CON-STRN-007 | |CON-STRN-007 | ||
| | | | ||
|} | |} | ||
==70- | ==70-Pin Module Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 315: | Line 320: | ||
|[[File:Harn-ecm-026_1.jpg|150px]] | |[[File:Harn-ecm-026_1.jpg|150px]] | ||
|Pigtail Harness | |Pigtail Harness | ||
|HARN- | (S12X and SECM70) | ||
|'''[ | |HARN-GCM70-001 | ||
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-raptor-controllers-harnesses-connectors-connectors-tools/gcm70/harness-ecm70-pigtail-12-ft/ Purchase]''' | |||
|- | |- | ||
|[[File:HARN-ECM-029.jpg|150px]] | |[[File:HARN-ECM-029.jpg|150px]] | ||
|Programming Harness | |Programming Harness | ||
(S12X) | |||
|HARN-ECM-029 | |HARN-ECM-029 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-ecm70-programming/ Purchase]''' | ||
|- | |||
|[[File:Harn-ecm-028.jpg|150px]] | |||
|Development Harness | |||
(SECM7O) | |||
|HARN-SECM-DEV-70 | |||
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-raptor-controllers-harnesses-connectors-connectors-tools/gcm70/harness-secm70-development/ Purchase]''' | |||
|- | |- | ||
|[[File:Harn-ecm-028.jpg|150px]] | |[[File:Harn-ecm-028.jpg|150px]] | ||
|Development Harness | |Development Harness | ||
(S12X) | |||
|HARN-ECM-028 | |HARN-ECM-028 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-ecm70-development/ Purchase]''' | ||
|} | |} | ||
=80 Pin Module= | =80-Pin MotoHawk Module= | ||
==80- | ==80-Pin Module Connectors== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 339: | Line 353: | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
|- | |||
|[[File:Con-Kit-RCM80.jpg|150px]] | |||
|Connector Kit includes: <br/><br/> (64) 0.63mm Tin Terminals 22-24AWG <br/>(16) 1.5mm Tin Terminals 18-20AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Connector Covers <br/> (1) 48-Pin Connector Cover <br/> (10) 0.63mm Plugs <br/>(5) 1.5mm Plugs | |||
| CON-KIT-RCM80 | |||
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-raptor-controllers-harnesses-connectors-connectors-tools/rcm80-for-raptor-controllers-harnesses-connectors-connectors-tools/raptor-connector-kit-rcm80/ Purchase]''' | |||
|- | |- | ||
|[[File:Asm-con-001-00-e.jpg|150px]] | |[[File:Asm-con-001-00-e.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (100) Terminals 18-20AWG <br/>(1) 24 Position Connector (A Key) <br/>(1) 24 Position Connector (B Key)<br/>(1) 32 Position Connector <br/>(100) Plugs <br/>(2) Covers for 24 Position Connector <br/>(1) Cover for 32 Position Connector | |Connector Kit includes: <br/><br/> (100) Terminals 18-20AWG <br/>(1) 24-Position Connector (A Key) <br/>(1) 24-Position Connector (B Key)<br/>(1) 32-Position Connector <br/>(100) Cavity Plugs <br/>(2) Covers for 24-Position Connector <br/>(1) Cover for 32-Position Connector | ||
|ASM-CON-001-00 | |ASM-CON-001-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm555-80/ Purchase]''' | ||
|- | |- | ||
Line 349: | Line 369: | ||
|Terminals 18-20AWG | |Terminals 18-20AWG | ||
|CON-TMFL-002-00 | |CON-TMFL-002-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-001a-00-e.jpg|150px]] | |[[File:Con-feml-001a-00-e.jpg|150px]] | ||
|24- | |24-Channel Connector (A Key) | ||
|CON-FEML-001A-00 | |CON-FEML-001A-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-001a-00-e.jpg|150px]] | |[[File:Con-feml-001a-00-e.jpg|150px]] | ||
|24- | |24-Channel Connector (B Key) | ||
|CON-FEML-001B-00 | |CON-FEML-001B-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-002a-00-e.jpg|150px]] | |[[File:Con-feml-002a-00-e.jpg|150px]] | ||
|32- | |32-Channel Connector | ||
|CON-FEML-002A-00 | |CON-FEML-002A-00 | ||
| | | | ||
|- | |- | ||
Line 373: | Line 392: | ||
|Connector Plug | |Connector Plug | ||
|CON-PLUG-002-00 | |CON-PLUG-002-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-covr-001a-01-e.jpg|150px]] | |[[File:Con-covr-001a-01-e.jpg|150px]] | ||
|Cover for 24 Position Connector | |Cover for 24-Position Connector | ||
|CON-COVR-001A-01 | |CON-COVR-001A-01 | ||
| | | | ||
|- | |- | ||
|[[File:Con-covr-001b-01-e.jpg|150px]] | |[[File:Con-covr-001b-01-e.jpg|150px]] | ||
|Cover for 32 Position Connector | |Cover for 32-Position Connector | ||
|CON-COVR-001B-01 | |CON-COVR-001B-01 | ||
| | | | ||
|} | |} | ||
==80- | ==80-Pin Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
|- | |||
|- | |- | ||
|[[File:HARN-PCM-012.jpg|150px]] | |[[File:HARN-PCM-012.jpg|150px]] | ||
|Programming Harness | |Programming Harness | ||
|HARN-PCM-012 | |HARN-PCM-012 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |- | ||
|[[File:Harn-pcm-008.jpg|150px]] | |[[File:Harn-pcm-008.jpg|150px]] | ||
|Development Harness | |Development Harness | ||
|HARN-PCM-008 | |HARN-PCM-008 | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |---> | ||
|[[File:HARN-INTR-025A.jpg|150px]] | |[[File:HARN-INTR-025A.jpg|150px]] | ||
|Simulator Harness | |Simulator Harness | ||
|HARN-INTR-025A | |HARN-INTR-025A | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-80-pin-ecm/ Purchase]''' | ||
|} | |} | ||
=112 Pin Module= | =112-Pin MotoHawk Module= | ||
==112- | ==112-Pin Module Connectors== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 425: | Line 445: | ||
|- | |- | ||
|[[File:ASM-CON-042.jpg|150px]] | |[[File:ASM-CON-042.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (100) 0.63mm Tin Terminals 22-24AWG <br/>(34) 1.5mm Tin Terminals 18-20AWG <br/>(1) 32- | |Connector Kit includes: <br/><br/> (100) 0.63mm Tin Terminals 22-24AWG <br/>(34) 1.5mm Tin Terminals 18-20AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Matte Connector (C key) <br/> (2) 32-Pin Connector Covers <br/> (1) 48-Pin Connector Cover <br/> (10) 0.63mm Plugs <br/>(5) 1.5mm Plugs | ||
|ASM-CON-042-MATTE | |ASM-CON-042-MATTE | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/5554-112-connector-kit-matte-type/ Purchase]''' | ||
|- | |- | ||
|[[File:ASM-CON-042.jpg|150px]] | |[[File:ASM-CON-042.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (100) 0.63mm Gold Terminals 22-24AWG <br/>(34) 1.5mm Gold Terminals 18-20AWG <br/>(1) 32- | |Connector Kit includes: <br/><br/> (100) 0.63mm Gold Terminals 22-24AWG <br/>(34) 1.5mm Gold Terminals 18-20AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Matte Connector (C key) <br/> (2) 32-Pin Connector Covers <br/> (1) 48-Pin Connector Cover <br/> (10) 0.63mm Plugs <br/>(5) 1.5mm Plugs | ||
|ASM-CON-042-OH | |ASM-CON-042-OH | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-oh-112-connector-kit-matte-seal-for-secm-112-gold-plated-terminals/ Purchase]''' | ||
|- | |- | ||
Line 439: | Line 459: | ||
|0.63mm Tin Terminals 22-24AWG | |0.63mm Tin Terminals 22-24AWG | ||
|CON-TMFL-050-00 | |CON-TMFL-050-00 | ||
| | | | ||
|- | |- | ||
Line 445: | Line 465: | ||
|1.5mm Tin Terminals 18-20AWG | |1.5mm Tin Terminals 18-20AWG | ||
|CON-TMFL-049-00 | |CON-TMFL-049-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-051-00-e.jpg|150px]] | |[[File:Con-feml-051-00-e.jpg|150px]] | ||
|32- | |32-Pin Matte Connector (A key) | ||
|CON-FEML-051-00 | |CON-FEML-051-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-052-00.jpg|150px]] | |[[File:Con-feml-052-00.jpg|150px]] | ||
|48- | |48-Pin Matte Connector (B key) | ||
|CON-FEML-052-00 | |CON-FEML-052-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-054-00-e.jpg|150px]] | |[[File:Con-feml-054-00-e.jpg|150px]] | ||
|32- | |32-Pin Matte Connector (C key) | ||
|CON-FEML-054-00 | |CON-FEML-054-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-plug-063-org.jpeg|150px]] | |[[File:Con-plug-063-org.jpeg|150px]] | ||
|0.63mm | |0.63mm Plugs | ||
|CON-PLUG - .63MM 112 Pin | |CON-PLUG - .63MM 112-Pin | ||
| | | | ||
|- | |- | ||
|[[File:Con-plug-15-org.jpeg|150px]] | |[[File:Con-plug-15-org.jpeg|150px]] | ||
|1.5mm | |1.5mm Plugs | ||
|CON-PLUG- 1.5MM 12 Pin | |CON-PLUG- 1.5MM 12-Pin | ||
| | | | ||
|- | |- | ||
|[[File:Con-covr-008-e.jpg|150px]] | |[[File:Con-covr-008-e.jpg|150px]] | ||
|Cover for 32- | |Cover for 32-Pin Connector | ||
|CON-COVR-008 | |CON-COVR-008 | ||
| | | | ||
|- | |- | ||
|[[File:Con-covr-009-e.jpg|150px]] | |[[File:Con-covr-009-e.jpg|150px]] | ||
|Cover for 48- | |Cover for 48-Pin Connector | ||
|CON-COVR-009 | |CON-COVR-009 | ||
| | | | ||
|} | |} | ||
==112- | ==112-Pin Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
|- | |- | ||
|[[File: | |[[File:HARN-P112-001new.jpg|150px]] | ||
|Pigtail Harness for ECM/ | |Pigtail Harness for ECM/GCM112 | ||
|HARN-P112-001 | |HARN-P112-001 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/pigtail-harness-for-a-5554-112-12/ Purchase]''' | ||
|- | |- | ||
|[[File:Harn-p112-001-e.jpg|150px]] | |[[File:Harn-p112-001-e.jpg|150px]] | ||
|Pigtail Harness for ECM-OH | |Pigtail Harness for ECM-OH | ||
|HARN-P112-001-OH | |HARN-P112-001-OH | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/112-pin-pigtail-harness-w-matte-seal-12-white-wire/ Purchase]''' | ||
|- | |- | ||
|[[File:HARN-P112-003.jpg|150px]] | |[[File:HARN-P112-003.jpg|150px]] | ||
|Programming Harness for ECM/ | |Programming Harness for ECM/GCM112 | ||
|HARN-P112-003 | |HARN-P112-003 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-5554-112-programming-harness/ Purchase]''' | ||
|- | |- | ||
|[[File:HARN-P112-003.jpg|150px]] | |[[File:HARN-P112-003.jpg|150px]] | ||
|Programming Harness for ECM-OH | |Programming Harness for ECM-OH | ||
|HARN-P112-003-OH | |HARN-P112-003-OH | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-564x-112-ecm-oh-programing-harness/ Purchase]''' | ||
|- | |- | ||
|[[File: | |[[File:HARN-P112-002new.jpg|150px]] | ||
|Development Harness for ECM/ | |Development Harness for ECM/GCM112 | ||
|HARN-P112-002 | |HARN-P112-002 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-5554-112-development-harness/ Purchase]''' | ||
|- | |- | ||
|[[File:Harn-ecm-014.jpg|150px]] | |[[File:Harn-ecm-014.jpg|150px]] | ||
|Development Harness for ECM-OH | |Development Harness for ECM-OH | ||
|HARN-P122-002-OH | |HARN-P122-002-OH | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |- | ||
|[[File:HARN-INTR-025A.jpg|150px]] | |[[File:HARN-INTR-025A.jpg|150px]] | ||
|Simulator Harness | |Simulator Harness | ||
|HARN-INTR-026A | |HARN-INTR-026A | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-112-pin-ecm/ Purchase]''' | ||
|} | |} | ||
=128 Pin Module= | =128-Pin MotoHawk Module= | ||
==128- | ==128-Pin Module Connectors== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
Line 546: | Line 566: | ||
|- | |- | ||
|[[File:ASM-CON-003-00.jpg|150px]] | |[[File:ASM-CON-003-00.jpg|150px]] | ||
|Connector Kit includes: <br/><br/> (200) Terminals 18-20AWG <br/>(2) 24 Position Connector (A Key) <br/>(2) 24 Position Connector (B Key)<br/>(1) 32 Position Connector <br/>(100) Plugs <br/>(4) Covers for 24 Position Connector <br/>(1) Cover for 32 Position Connector | |Connector Kit includes: <br/><br/> (200) Terminals 18-20AWG <br/>(2) 24-Position Connector (A Key) <br/>(2) 24-Position Connector (B Key)<br/>(1) 32-Position Connector <br/>(100) Plugs <br/>(4) Covers for 24-Position Connector <br/>(1) Cover for 32-Position Connector | ||
|ASM-CON-003-00 | |ASM-CON-003-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm565-128/ Purchase]''' | ||
|- | |- | ||
Line 554: | Line 574: | ||
|Terminals 18-20AWG | |Terminals 18-20AWG | ||
|CON-TMFL-002-00 | |CON-TMFL-002-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-001a-00-e.jpg|150px]] | |[[File:Con-feml-001a-00-e.jpg|150px]] | ||
|24 Position Connector (A Key) | |24-Position Connector (A Key) | ||
|CON-FEML-001A-00 | |CON-FEML-001A-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-001a-00-e.jpg|150px]] | |[[File:Con-feml-001a-00-e.jpg|150px]] | ||
|24 Position Connector (B Key) | |24-Position Connector (B Key) | ||
|CON-FEML-001B-00 | |CON-FEML-001B-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-feml-002a-00-e.jpg|150px]] | |[[File:Con-feml-002a-00-e.jpg|150px]] | ||
|32 Position Connector | |32-Position Connector | ||
|CON-FEML-002A-00 | |CON-FEML-002A-00 | ||
| | | | ||
|- | |- | ||
Line 578: | Line 598: | ||
|Connector Plug | |Connector Plug | ||
|CON-PLUG-002-00 | |CON-PLUG-002-00 | ||
| | | | ||
|- | |- | ||
|[[File:Con-covr-001a-01-e.jpg|150px]] | |[[File:Con-covr-001a-01-e.jpg|150px]] | ||
|Cover for 24 Position Connector | |Cover for 24-Position Connector | ||
|CON-COVR-001A-01 | |CON-COVR-001A-01 | ||
| | | | ||
|- | |- | ||
|[[File:Con-covr-001b-01-e.jpg|150px]] | |[[File:Con-covr-001b-01-e.jpg|150px]] | ||
|Cover for 32 Position Connector | |Cover for 32-Position Connector | ||
|CON-COVR-001B-01 | |CON-COVR-001B-01 | ||
| | | | ||
|} | |} | ||
==128- | ==128-Pin Harnesses== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|'''Webstore''' | !scope="col" style = "width:150px;"|'''Webstore''' | ||
|- | <!--|- | ||
|[[File:HARN-P128-002-WHT.jpg|150px]] | |[[File:HARN-P128-002-WHT.jpg|150px]] | ||
|Pigtail Harness (White) | |Pigtail Harness (White) | ||
|HARN-P128-002-WHT | |HARN-P128-002-WHT | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-128-pin-ecm/ Purchase]''' | ||
|- | |- | ||
|[[File:Image_489.jpg|150px]] | |[[File:Image_489.jpg|150px]] | ||
|Pigtail Harness (Multi-Color) | |Pigtail Harness (Multi-Color) | ||
|HARN-P128-001-00 | |HARN-P128-001-00 | ||
|'''[ | |'''[https://store.neweagle.net/product/pigtail-harness-for-a-565-128/ Purchase]''' | ||
|- | |- | ||
|[[File:Image_490.jpg|150px]] | |[[File:Image_490.jpg|150px]] | ||
|Development Harness | |Development Harness | ||
|HARN-P128-002-00 | |HARN-P128-002-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-connectors-displays-veecan128/ Purchase]'''--> | ||
|- | |- | ||
|[[File:HARN-INTR-025A.jpg|150px]] | |[[File:HARN-INTR-025A.jpg|150px]] | ||
|Simulator Harness | |Simulator Harness | ||
|HARN-INTR-027A | |HARN-INTR-027A | ||
|'''[ | |'''Please contact [mailto:sales@neweagle.net sales]''' | ||
|- | |||
|[[File:HARN-CAN-DP-128.jpg|150px]] | |||
|VeeCAN 128 DISPLAY POWER AND PROGRAMMING HARNESS | |||
|HARN-CAN-DP-128 | |||
|'''[https://store.neweagle.net/product/veecan-128-display-power-and-programming-harness/?preview=true Purchase]''' | |||
|} | |} | ||
=Mounting Hardware= | =Mounting Hardware= | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
!scope="col" style = "width: | !scope="col" style = "width:250px;"|Product | ||
!scope="col" style = "width:150px;"|Part Number | !scope="col" style = "width:150px;"|Part Number | ||
!scope="col" style = "width:150px;"|Webstore | !scope="col" style = "width:150px;"|Webstore | ||
|- | |- | ||
| rowspan=2| [[File:Asm-moun-002-00-e_1.jpg|150px]] | | rowspan=2| [[File:Asm-moun-002-00-e_1.jpg|150px]] | ||
|1 Mounting Hardware Kit for MotoHawk Module (3 bushings, 3 washers, 3 rubber grommets) | |1 Mounting Hardware Kit for MotoHawk Module<br> (3 bushings, 3 washers, 3 rubber grommets) | ||
|ASM-MOUN-002-00 | |ASM-MOUN-002-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/controller-mounting-hardware/mounting-hardware-for-1-module/ Purchase]''' | ||
|- | |- | ||
|30 Mounting Hardware Kits for MotoHawk Modules (90 bushings, 90 washers, 90 rubber grommets) | |30 Mounting Hardware Kits for MotoHawk Modules<br>(90 bushings, 90 washers, 90 rubber grommets) | ||
|ASM-MOUN-001-01 | |ASM-MOUN-001-01 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/controller-mounting-hardware/mtg-hardware-90-pc-bulk-kit-for-30-modules/ Purchase]''' | ||
|- | |- | ||
| rowspan=2| [[File:Bush-alum-001-00-e.jpg|150px]] | | rowspan=2| [[File:Bush-alum-001-00-e.jpg|150px]] | ||
|1 Aluminum Bushing Kit for a MotoHawk Module (3 bushings) | |1 Aluminum Bushing Kit for a MotoHawk Module<br>(3 bushings) | ||
|BUSH-ALUM-001-00 | |BUSH-ALUM-001-00 | ||
| | | | ||
|- | |- | ||
|2212 Aluminum Bushings for MotoHawk Modules | |2212 Aluminum Bushings for MotoHawk Modules | ||
|ASM-MOUN-008-00 | |ASM-MOUN-008-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/controller-mounting-hardware/bulk-packaging-aluminum-bushing-mounting-hardware/ Purchase]''' | ||
|- | |- | ||
| rowspan=2| [[File:Grmt-rbbr-001-00.jpg|150px]] | | rowspan=2| [[File:Grmt-rbbr-001-00.jpg|150px]] | ||
|1 Rubber Grommet Kit for a MotoHawk Module (3 grommets) | |1 Rubber Grommet Kit for a MotoHawk Module<br> (3 grommets) | ||
|GRMT-RBBR-001-00 | |GRMT-RBBR-001-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/controller-mounting-hardware/mounting-hardware-rubber-grommet/ Purchase]''' | ||
|- | |- | ||
|4000 Rubber Grommets for MotoHawk Module | |4000 Rubber Grommets for MotoHawk Module | ||
|ASM-MOUN-007-00 | |ASM-MOUN-007-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/controller-mounting-hardware/bulk-packaging-rubber-grommet-mounting-hardware/ Purchase]''' | ||
|- | |- | ||
| rowspan=2| [[File:Image_597.jpg|150px]] | | rowspan=2| [[File:Image_597.jpg|150px]] | ||
|1 Washer Kit for a MotoHawk Module (3 washers) | |1 Washer Kit for a MotoHawk Module<br>(3 washers) | ||
|WASH-FLAT-002-00 | |WASH-FLAT-002-00 | ||
| | | | ||
|- | |- | ||
|5000 Washers for MotoHawk Modules | |5000 Washers for MotoHawk Modules | ||
|ASM-MOUN-006-00 | |ASM-MOUN-006-00 | ||
|'''[ | |'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/controller-mounting-hardware/bulk-packaging-flat-washer-mounting-hardware/ Purchase]''' | ||
|} | |} | ||
===Boot Cable Harnesses, Connectors and Keys=== | ===Boot Cable Harnesses, Connectors and Keys=== | ||
=====BOOT KEY FOR ECM555-48/80 GCM563-48 HCM563-48 ECM565-128 AND ECM5554-112===== | =====BOOT KEY FOR ECM555-48/80, GCM563-48, HCM563-48, ECM565-128 AND ECM5554-112===== | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 683: | Line 704: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 478.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Boot Key Information can be found here: | Boot Key Information can be found here: | ||
'''[ | '''[[MotoHawk_Hardware#Boot_Key_Recovery|Boot Key Recovery]]''' | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
HARN-INTR-008-01 | HARN-INTR-008-01 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/boot-key-for-ecm555-48-80-gcm563-48-hcm563-48-ecm565-128-and-ecm5554-112/ Purchase]''' | ||
|} | |} | ||
=Connector Crimp and Removal Tools= | =Connector Crimp and Removal Tools= | ||
'''HAND CRIMP TOOL FOR | '''HAND CRIMP TOOL FOR SMARTCRAFT AND 24-PIN MODULES''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 706: | Line 728: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:TOOL-CON-001-00.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Manufacturer-suggested crimping tool for Motohawk ECM24 | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON- | TOOL-CON-001-00 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-0s12-24-crimp-removal-tools-connectors-tools/crimp-tool-for-smartcraft-and-24-pin-ecu-family/ Purchase]''' | ||
|} | |} | ||
'''HAND CRIMP TOOL FOR 24-PIN MODULES''' | |||
'''HAND CRIMP TOOL FOR 24 PIN MODULES''' | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | |||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 727: | Line 748: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 574.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for 24 Pin Terminals | Crimp Tool for 24-Pin Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-002-00 | TOOL-CON-002-00 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-0s12-24-crimp-removal-tools-connectors-tools/hand-crimp-tool-for-24-pin-modules/ Purchase]''' | ||
|} | |} | ||
'''REMOVAL TOOL - SMARTCRAFT TPA''' | '''REMOVAL TOOL - SMARTCRAFT TPA''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 746: | Line 767: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Tool-con-004-00.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TPA Removal Tool | TPA Removal Tool | ||
Line 753: | Line 774: | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/smartcraft-crimp-removal-tools-connectors-tools/removal-tool-smartcraft-purple-cap/ Purchase]''' | ||
|} | |} | ||
'''REMOVAL TOOL - SMARTCRAFT TERMINALS''' | '''REMOVAL TOOL - SMARTCRAFT TERMINALS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 765: | Line 786: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 576.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Terminal Removal Tool | Terminal Removal Tool | ||
Line 772: | Line 793: | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/smartcraft-crimp-removal-tools-connectors-tools/removal-tool-smartcraft-terminals/ Purchase]''' | ||
|} | |} | ||
'''CRIMP TOOL FOR 48/80/128 PIN ECM PINS''' | '''CRIMP TOOL FOR 48/80/128-PIN ECM PINS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 784: | Line 805: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 577.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for 48/80/128 Pin Terminals | Crimp Tool for 48/80/128-Pin Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-008-00 | TOOL-CON-008-00 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-555-48-crimp-removal-tools-connectors-tools/crimp-tool-for-48-80-128-pin-ecm-pins/ Purchase]''' | ||
|} | |} | ||
'''EXTRACTION TOOL FOR 48/80/128 ECM PINS''' | '''EXTRACTION TOOL FOR 48/80/128 ECM PINS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 803: | Line 824: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 578.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Terminal Removal Tool for 48/80/128 Pin | Terminal Removal Tool for 48/80/128-Pin ECUs | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-009-00 | TOOL-CON-009-00 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-555-48-crimp-removal-tools-connectors-tools/extraction-tool-for-48-80-128-ecm-pins/ Purchase]''' | ||
|} | |} | ||
'''CRIMPER FOR RELAY TERMINALS''' | '''CRIMPER FOR RELAY TERMINALS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 822: | Line 843: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Tool-con-010.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for Delphi 630 Series Terminals | Crimp Tool for Delphi 630 Series Terminals | ||
Line 829: | Line 850: | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''Please contact [mailto:sales@neweagle.net sales]''' | ||
|} | |} | ||
'''CRIMPER - SMARTCRAFT TERMINALS''' | '''CRIMPER - SMARTCRAFT TERMINALS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 841: | Line 862: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Tool-con-011.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for | Crimp Tool for SmartCraft Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-011-00 | TOOL-CON-011-00 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/smartcraft-crimp-removal-tools-connectors-tools/crimper-smartcraft-terminals/ Purchase]''' | ||
|} | |} | ||
'''CRIMPER - DEUTSCH HDT48-00''' | '''CRIMPER - DEUTSCH HDT48-00''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 860: | Line 881: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:HDT-48-00.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Deutsch HDT48-00 Terminal Crimper | Deutsch HDT48-00 Terminal Crimper | ||
Line 867: | Line 888: | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/cm0711-crimp-removal-tools-connectors-tools/crimper-deutsch-hdt48-00/ Purchase]''' | ||
|} | |} | ||
'''CRIMPER - MOLEX .63MM FOR | '''CRIMPER - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 880: | Line 901: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 580.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for Matte .63mm | Crimp Tool for Matte 0.63mm Molex Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-016-MATTE | TOOL-CON-016-MATTE (TOOL-GCM48-01) | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-5554-112-crimp-removal-tools-connectors-tools/crimper-63mm-for-112pin-controller-matte-connectors/ Purchase]''' | ||
|} | |} | ||
'''CRIMPER 1.5MM FOR 112 PIN ECM CONNECTORS''' | '''CRIMPER 1.5MM FOR 112-PIN ECM CONNECTORS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 901: | Line 922: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 581.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for 1.5mm Molex Matte Terminals | Crimp Tool for 1.5mm Molex Matte Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-017 -MATTE | TOOL-CON-017-MATTE (TOOL-GCM48-02) | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-5554-112-crimp-removal-tools-connectors-tools/crimper-1-5mm-for-molex-cmc-connector-terminals/ Purchase]''' | ||
|} | |} | ||
'''TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112 PIN CONTROLLER CONNECTORS''' | '''TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 921: | Line 942: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Tool-con-018-matte.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Removal Tool for .63mm Molex Matte Terminals | Removal Tool for 0.63mm Molex Matte Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-018 | TOOL-CON-018 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-5554-112-crimp-removal-tools-connectors-tools/terminal-removal-tool-0-63mm-for-112-pin-controller-gel-connectors/ Purchase]''' | ||
|} | |} | ||
'''TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112 PIN CONTROLLER''' | '''TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112-PIN CONTROLLER''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
Line 941: | Line 962: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:Image 585.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Removal Tool for 1.5mm Molex | Removal Tool for 1.5mm Molex Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON-019 | TOOL-CON-019 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-5554-112-crimp-removal-tools-connectors-tools/terminal-removal-tool-molex-1-5mm-for-112-pin-controller/ Purchase]''' | ||
|} | |} | ||
'''CRIMPER - SMALL TYCO TERMINAL ECM70''' | '''CRIMPER - SMALL TYCO TERMINAL ECM70''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 961: | Line 982: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:TOOL-CON-020-00.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for small Tyco Terminals | Crimp Tool for small Tyco Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL- | TOOL-GCM70-01 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-s12x-70-crimp-removal-tools-connectors-tools/crimper-small-tyco-terminal-ecm70/ Purchase]''' | ||
|} | |} | ||
'''CRIMPER - MOLEX LARGE TERMINAL ECM70 18- | '''CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20AWG''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 980: | Line 1,001: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:TOOL-CON-021-00.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool for Large Tyco Terminals | Crimp Tool for Large Tyco Terminals | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL- | TOOL-GCM70-02 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-s12x-70-crimp-removal-tools-connectors-tools/crimper-molex-small-terminal-ecm70-18-20-awg/ Purchase]''' | ||
|} | |} | ||
'''TERMINAL REMOVAL FOR ECM70 - | '''CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG''' | ||
{| class="wikitable" style="text-align: center;" cellpadding = "5" | {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | ||
!scope="col" style = "width:150px;"|Picture | |||
!scope="col" style = "width:200px;"|Product | |||
!scope="col" style = "width:150px;"|Part Number | |||
!scope="col" style = "width:150px;"|Webstore | |||
|- | |||
|style = "height:180px; width:180px;"| | |||
[[File:TOOL-CON-022.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |||
CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG | |||
|style = "height:180px; width:180px;"| | |||
TOOL-GCM70-03 | |||
|style = "height:180px; width:180px;"| | |||
'''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-s12x-70-crimp-removal-tools-connectors-tools/crimper-molex-large-ecm70-terminal-14-16-awg/ Purchase]''' | |||
|} | |||
'''TERMINAL REMOVAL FOR ECM70''' | |||
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | |||
!scope="col" style = "width:150px;"|Picture | |||
!scope="col" style = "width:200px;"|Product | |||
!scope="col" style = "width:150px;"|Part Number | |||
!scope="col" style = "width:150px;"|Webstore | |||
|- | |||
|style = "height:180px; width:180px;"| | |||
[[File:TOOL-CON-025.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |||
Terminal Removal Tool for ECM70s | |||
|style = "height:180px; width:180px;"| | |||
TOOL-GCM70-04 | |||
|style = "height:180px; width:180px;"| | |||
'''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-s12x-70-crimp-removal-tools-connectors-tools/terminal-removal-for-ecm70/ Purchase]''' | |||
|} | |||
'''REMOVAL TOOL - CM0711 and CM3626 MODULES''' | |||
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | |||
!scope="col" style = "width:150px;"|Picture | |||
!scope="col" style = "width:200px;"|Product | |||
!scope="col" style = "width:150px;"|Part Number | |||
!scope="col" style = "width:150px;"|Webstore | |||
|- | |||
|style = "height:180px; width:180px;"| | |||
[[File:TOOL-CON-0411-336-1605.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |||
Terminal Removal Tool for <br> CM0711 and CM3626 Modules | |||
|style = "height:180px; width:180px;"| | |||
TOOL-CON-0411-336-1605 | |||
|style = "height:180px; width:180px;"| | |||
'''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/cm0711-crimp-removal-tools-connectors-tools/removal-tool-cm0711-cm3626-modules/ Purchase]''' | |||
|} | |||
'''REMOVAL TOOL 48/80/128''' | |||
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | |||
!scope="col" style = "width:150px;"|Picture | |||
!scope="col" style = "width:200px;"|Product | |||
!scope="col" style = "width:150px;"|Part Number | |||
!scope="col" style = "width:150px;"|Webstore | |||
|- | |||
|style = "height:180px; width:180px;"| | |||
[[File:TOOL-CON-0411-240-2005.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |||
Terminal Removal Tool for <br> 48/80/128-Pin | |||
|style = "height:180px; width:180px;"| | |||
TOOL-CON-0411-240-2005 | |||
|style = "height:180px; width:180px;"| | |||
'''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-555-48-crimp-removal-tools-connectors-tools/removal-tool-48-80-128/ Purchase]''' | |||
|} | |||
'''REMOVAL TOOL - CM2115 MODULES''' | |||
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | |||
!scope="col" style = "width:150px;"|Picture | |||
!scope="col" style = "width:200px;"|Product | |||
!scope="col" style = "width:150px;"|Part Number | |||
!scope="col" style = "width:150px;"|Webstore | |||
|- | |||
|style = "height:180px; width:180px;"| | |||
[[File:TOOL-CON-DT-RT1.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |||
Removal Tool - CM2115 Modules | |||
|style = "height:180px; width:180px;"| | |||
TOOL-CON-DT-RT1 | |||
|style = "height:180px; width:180px;"| | |||
'''Please contact [mailto:sales@neweagle.net sales]''' | |||
|} | |||
'''CRIMPER TOOL - VEECAN DISPLAYS''' | |||
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5" | |||
!scope="col" style = "width:150px;"|Picture | !scope="col" style = "width:150px;"|Picture | ||
Line 999: | Line 1,113: | ||
|- | |- | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[[File:TOOL-CON-DTT-16-01.jpg|150px]] | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
Crimp Tool - VeeCAN Displays <br>(1062-16-0622 Terminals) | |||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
TOOL-CON- | TOOL-CON-DTT-16-01 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[ | '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/veecan-displays-crimp-removal-tools-connectors-tools/crimp-tool-for-veecan-displays-1062-16-0622-terminals/ Purchase]''' | ||
|} | |} |
Latest revision as of 15:39, 6 February 2023
Introduction- Pigtail Harness: A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM. - Development Harness: Development harnesses are pigtail harnesses with power, ground, key-switch and communication wired. The harness is also covered in loom. - Boot Harness: A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file will be flashed onto the module. - Programming Harness: A programming harness contains only the necessary connections to communicate with and flash the module. This includes Battery, Ground, Wake_Input1 (KeySW), and CAN1+/-. - Simulator Harness: Simulator harnesses are used in conjunction with a Desk Top Simulator. 24-Pin MotoHawk Module24-Pin Module ConnectorsPlease note that cavity plugs are not used on the connector kits. Overview of 24-Pin Connector
24-Pin Module Pigtail Harnesses
24-Pin Module Programming and Boot Harnesses
48-Pin MotoHawk Module48-Pin Module Connectors
48-Pin Module Pigtail Harnesses
48-Pin Module Programming and Boot Harnesses
48-Pin Module Development Harnesses
48-Pin Simulator Harnesses
70-Pin MotoHawk Module70-Pin Module Connectors
70-Pin Module Harnesses
80-Pin MotoHawk Module80-Pin Module Connectors
80-Pin Harnesses
112-Pin MotoHawk Module112-Pin Module Connectors
112-Pin Harnesses
128-Pin MotoHawk Module128-Pin Module Connectors
128-Pin Harnesses
Mounting Hardware
Boot Cable Harnesses, Connectors and KeysBOOT KEY FOR ECM555-48/80, GCM563-48, HCM563-48, ECM565-128 AND ECM5554-112
Connector Crimp and Removal ToolsHAND CRIMP TOOL FOR SMARTCRAFT AND 24-PIN MODULES
REMOVAL TOOL - SMARTCRAFT TPA
REMOVAL TOOL - SMARTCRAFT TERMINALS
CRIMP TOOL FOR 48/80/128-PIN ECM PINS
EXTRACTION TOOL FOR 48/80/128 ECM PINS
CRIMPER FOR RELAY TERMINALS
CRIMPER - SMARTCRAFT TERMINALS
CRIMPER - DEUTSCH HDT48-00
CRIMPER 1.5MM FOR 112-PIN ECM CONNECTORS
TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112-PIN CONTROLLER
CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20AWG
CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG
TERMINAL REMOVAL FOR ECM70
REMOVAL TOOL - CM0711 and CM3626 MODULES
REMOVAL TOOL 48/80/128
REMOVAL TOOL - CM2115 MODULES
CRIMPER TOOL - VEECAN DISPLAYS
|