Raptor:PWM Output: Difference between revisions

Latest revision as of 13:23, 14 September 2023

This block sets the state of the selected PWM output. PWM (pulse width modulation) is typically used similar to an analog output.

Input	Type	Description
Duty Cycle	uint16	The duty cycle of the output in 0.01%. For example raw value 500 = 5%.
Frequency	uint32	The frequency of the output in 0.01Hz. For example raw value 40000 = 400Hz.

Parameter	Type	Description
Hardware Resource		Specifies which input from the hardware is being read.
Driver Type		Specifies the type of driver to be used on the selected output.

@@ Line 22: / Line 22: @@
 | uint32
 | The frequency of the output in 0.01Hz. For example raw value 40000 = 400Hz.
-|}
-== Outputs ==
-{| class="wikitable" style="width:75%;"
-|-
-! scope="col" style="width: 15%;"|Output
-! scope="col" style="width: 15%;"|Type
-! scope="col" style="width: 70%;"|Description
 |}