MotoHawk-Module-Harnesses-and-Connectors: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
 
(25 intermediate revisions by the same user not shown)
Line 3: Line 3:
|style = "width:850px;"|
|style = "width:850px;"|
=Introduction=
=Introduction=
'''- Pigtail Harness:  '''
'''- Pigtail Harness: '''
A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM.
A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM.


'''- Development Harness:  '''
'''- Development Harness: '''
Development Harnesses are pigtail harness's with power, ground, key switch and communication wired. The harness is also covered in loom.
Development harnesses are pigtail harnesses with power, ground, key-switch and communication wired. The harness is also covered in loom.


'''- Boot Harness:  '''
'''- Boot Harness: '''
A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file flashed onto the module.
A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file will be flashed onto the module.


'''- Programming Harness:  '''
'''- Programming Harness: '''
A programming harness contains only the necessary connections to communicate with and flash the module. This includes Battery, Ground, Wake_Input1 (KeySW), and CAN1+/-. 


'''- Simulator Harness:  '''
'''- Simulator Harness: '''
Simulator Harnesses are used in conjunction with a Desk Top Simulator.
Simulator harnesses are used in conjunction with a Desk Top Simulator.


=24-Pin MotoHawk Module=
=24-Pin MotoHawk Module=
==24-Pin Module Connectors==
==24-Pin Module Connectors==
Please note that cavity plugs are not used on the connector kits. [http://www.neweagle.net/support/wiki/docs/24%20Pin%20Female%20Harness%20connector.pdf Overview of 24-Pin Connector]
Please note that cavity plugs are not used on the connector kits. '''[http://www.neweagle.net/support/wiki/docs/24%20Pin%20Female%20Harness%20connector.pdf Overview of 24-Pin Connector]'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 29: Line 30:
|-
|-
|[[File:ASM-CON-004-00.jpg|150px]]
|[[File:ASM-CON-004-00.jpg|150px]]
|Connector Kit includes: <br/><br/> (35) Terminals 20 AWG <br/>(1) Connector<br/>(1) Black Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief
|Connector Kit includes: <br/><br/> (35) Terminals 20AWG <br/>(1) Connector<br/>(1) Black Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief
|ASM-CON-004
|ASM-CON-004
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecms12-24/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecms12-24/ Purchase]'''
Line 35: Line 36:
|-
|-
|[[File:ASM-CON-006-00.jpg|150px]]
|[[File:ASM-CON-006-00.jpg|150px]]
|Connector Kit includes: <br/><br/> (35) Terminals 20 AWG <br/>(1) Connector<br/>(1) Clear Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief
|Connector Kit includes: <br/><br/> (35) Terminals 20AWG <br/>(1) Connector<br/>(1) Clear Retainer<br/>(1) CPA <br/>(1) Cable Seal <br/>(1) Strain Relief
|ASM-CON-006
|ASM-CON-006
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-gcms12-24/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-gcms12-24/ Purchase]'''
Line 119: Line 120:
|-
|-
|[[File:Harn-secm-005d1.jpg|150px]]
|[[File:Harn-secm-005d1.jpg|150px]]
|Boot harness for ECM-S12-24 Module
|Boot Harness for ECM-S12-24 Module
|HARN-SECM-005-D1
|HARN-SECM-005-D1
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-secm-bootstrap-for-ecm-s12-24/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-secm-bootstrap-for-ecm-s12-24/ Purchase]'''
Line 136: Line 137:
|-
|-
|[[File:Asm-con-002-00-e.jpg|150px]]
|[[File:Asm-con-002-00-e.jpg|150px]]
|Connector Kit includes: <br/><br/> (55) Terminals 18-20 AWG <br/>(1) Connector (A Key) <br/>(1) Connector (B Key)<br/>(48) Plugs <br/>(2) Covers
|Connector Kit includes: <br/><br/> (55) Terminals 18-20AWG <br/>(1) Connector (A Key) <br/>(1) Connector (B Key)<br/>(48) Plugs <br/>(2) Covers
|ASM-CON-002-00
|ASM-CON-002-00
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm-gcm-hcm-48/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm-gcm-hcm-48/ Purchase]'''
Line 142: Line 143:
|-
|-
|[[File:Con-tmfl-002-00.jpg|150px]]
|[[File:Con-tmfl-002-00.jpg|150px]]
|Terminals 18-20 AWG
|Terminals 18-20AWG
|CON-TMFL-002-00
|CON-TMFL-002-00
|
|
Line 181: Line 182:
|-
|-
|[[File:Harn-ecm-004.jpg|150px]]
|[[File:Harn-ecm-004.jpg|150px]]
|Pigtail Harness for ECM/GCM/HCM 48 PIN
|Pigtail Harness for ECM/GCM/HCM 48-Pin
|HARN-ECM-004-D0
|HARN-ECM-004-D0
|'''Please contact [mailto:sales@neweagle.net sales]'''
|'''Please contact [mailto:sales@neweagle.net sales]'''
Line 210: Line 211:
|-
|-
|[[File:HARN-PROG-009.jpg|150px]]
|[[File:HARN-PROG-009.jpg|150px]]
|Quick Programming Cable for GCM/HCM 48 (a.k.a. Fire48)
|Quick Programming Cable for GCM/HCM 48 (a.k.a. Fire 48)
|HARN-PROG-009
|HARN-PROG-009
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/gcm-hcm-48-fire48-quick-programming-harness/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/gcm-hcm-48-fire48-quick-programming-harness/ Purchase]'''
Line 253: Line 254:
|HARN-INTR-024B
|HARN-INTR-024B
HARN-INTR-024C
HARN-INTR-024C
|[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-48-pin-ecm/ Purchase]
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-48-pin-ecm/ Purchase]'''
[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-motohawk-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-48-pin-gcm-hcm/ Purchase]
'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-motohawk-controllers-harnesses-connectors-connectors-tools/harness-simulator-to-48-pin-gcm-hcm/ Purchase]'''
|}
|}


Line 269: Line 270:
|-
|-
|[[File:ASM-CON-046 PIC.jpg|150px]]
|[[File:ASM-CON-046 PIC.jpg|150px]]
|Connector Kit includes: <br/><br/> (80) 0.63 mm Terminals 18-20 AWG <br/>(8) 1.5 mm Terminals 18-20 AWG <br/>(1) Female Connector <br/>(15) 0.63 mm Plugs <br/>(5) 1.5 mm Plugs <br/>(1) Cover
|Connector Kit includes: <br/><br/> (80) 0.63mm Terminals 18-20AWG <br/>(8) 1.5mm Terminals 18-20AWG <br/>(1) Female Connector <br/>(15) 0.63mm Plugs <br/>(5) 1.5mm Plugs <br/>(1) Cover
|ASM-CON-046
|ASM-CON-046
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-gcm70-general-control-module/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-gcm70-general-control-module/ Purchase]'''
Line 275: Line 276:
|-
|-
|[[File:Image677.jpg|150px]]
|[[File:Image677.jpg|150px]]
|0.63 mm Terminals 18-20 AWG
|0.63mm Terminals 18-20AWG
|CON-TMFL-054-00
|CON-TMFL-054-00
|
|
|-
|-
|[[File:Image_678.jpg|150px]]
|[[File:Image_678.jpg|150px]]
|1.5 mm Terminals 18-20 AWG
|1.5mm Terminals 18-20AWG
|CON-TMFL-055-00
|CON-TMFL-055-00
|
|
Line 291: Line 292:
|-
|-
|[[File:Con-plug-063-org.jpeg|150px]]
|[[File:Con-plug-063-org.jpeg|150px]]
|0.63 mm Plugs
|0.63mm Plugs
|CON-PLUG - .63 MM 112-Pin
|CON-PLUG - .63 MM 112-Pin
|
|
Line 297: Line 298:
|-
|-
|[[File:Con-plug-15-org.jpeg|150px]]
|[[File:Con-plug-15-org.jpeg|150px]]
|1.5 mm Plugs
|1.5mm Plugs
|CON-PLUG- 1.5 MM 12-Pin
|CON-PLUG- 1.5 MM 12-Pin
|
|
Line 354: Line 355:
|-
|-
|[[File:Con-Kit-RCM80.jpg|150px]]
|[[File:Con-Kit-RCM80.jpg|150px]]
|Connector Kit includes: <br/><br/> (64) 0.63 mm Tin Terminals 22-24 AWG <br/>(16) 1.5 mm Tin Terminals 18-20 AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Connector Covers <br/>  (1) 48-Pin Connector Cover <br/> (10) 0.63 mm Plugs <br/>(5) 1.5 mm Plugs
|Connector Kit includes: <br/><br/> (64) 0.63mm Tin Terminals 22-24AWG <br/>(16) 1.5mm Tin Terminals 18-20AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Connector Covers <br/>  (1) 48-Pin Connector Cover <br/> (10) 0.63mm Plugs <br/>(5) 1.5mm Plugs
| CON-KIT-RCM80
| CON-KIT-RCM80
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-raptor-controllers-harnesses-connectors-connectors-tools/rcm80-for-raptor-controllers-harnesses-connectors-connectors-tools/raptor-connector-kit-rcm80/  Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-raptor-controllers-harnesses-connectors-connectors-tools/rcm80-for-raptor-controllers-harnesses-connectors-connectors-tools/raptor-connector-kit-rcm80/  Purchase]'''
Line 360: Line 361:
|-
|-
|[[File:Asm-con-001-00-e.jpg|150px]]
|[[File:Asm-con-001-00-e.jpg|150px]]
|Connector Kit includes: <br/><br/> (100) Terminals 18-20 AWG <br/>(1) 24-Position Connector (A Key) <br/>(1) 24-Position Connector (B Key)<br/>(1) 32-Position Connector <br/>(100) Caviety Plugs <br/>(2) Covers for 24-Position Connector <br/>(1) Cover for 32-Position Connector
|Connector Kit includes: <br/><br/> (100) Terminals 18-20AWG <br/>(1) 24-Position Connector (A Key) <br/>(1) 24-Position Connector (B Key)<br/>(1) 32-Position Connector <br/>(100) Cavity Plugs <br/>(2) Covers for 24-Position Connector <br/>(1) Cover for 32-Position Connector
|ASM-CON-001-00
|ASM-CON-001-00
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm555-80/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm555-80/ Purchase]'''
Line 366: Line 367:
|-
|-
|[[File:Con-tmfl-002-00.jpg|150px]]
|[[File:Con-tmfl-002-00.jpg|150px]]
|Terminals 18-20 AWG
|Terminals 18-20AWG
|CON-TMFL-002-00
|CON-TMFL-002-00
|
|
Line 444: Line 445:
|-
|-
|[[File:ASM-CON-042.jpg|150px]]
|[[File:ASM-CON-042.jpg|150px]]
|Connector Kit includes: <br/><br/> (100) 0.63 mm Tin Terminals 22-24 AWG <br/>(34) 1.5 mm Tin Terminals 18-20 AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Matte Connector (C key) <br/> (2) 32-Pin Connector Covers <br/>  (1) 48-Pin Connector Cover <br/> (10) 0.63 mm Plugs <br/>(5) 1.5 mm Plugs
|Connector Kit includes: <br/><br/> (100) 0.63mm Tin Terminals 22-24AWG <br/>(34) 1.5mm Tin Terminals 18-20AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Matte Connector (C key) <br/> (2) 32-Pin Connector Covers <br/>  (1) 48-Pin Connector Cover <br/> (10) 0.63mm Plugs <br/>(5) 1.5mm Plugs
|ASM-CON-042-MATTE
|ASM-CON-042-MATTE
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/5554-112-connector-kit-matte-type/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/5554-112-connector-kit-matte-type/ Purchase]'''
Line 450: Line 451:
|-
|-
|[[File:ASM-CON-042.jpg|150px]]
|[[File:ASM-CON-042.jpg|150px]]
|Connector Kit includes: <br/><br/> (100) 0.63 mm Gold Terminals 22-24 AWG <br/>(34) 1.5 mm Gold Terminals 18-20 AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Matte Connector (C key) <br/> (2) 32-Pin Connector Covers <br/>  (1) 48-Pin Connector Cover <br/> (10) 0.63 mm Plugs <br/>(5) 1.5 mm Plugs
|Connector Kit includes: <br/><br/> (100) 0.63mm Gold Terminals 22-24AWG <br/>(34) 1.5mm Gold Terminals 18-20AWG <br/>(1) 32-Pin Matte Connector (A key)<br/> (1) 48-Pin Matte Connector (B key) <br/> (1) 32-Pin Matte Connector (C key) <br/> (2) 32-Pin Connector Covers <br/>  (1) 48-Pin Connector Cover <br/> (10) 0.63mm Plugs <br/>(5) 1.5mm Plugs
|ASM-CON-042-OH
|ASM-CON-042-OH
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-oh-112-connector-kit-matte-seal-for-secm-112-gold-plated-terminals/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-oh-112-connector-kit-matte-seal-for-secm-112-gold-plated-terminals/ Purchase]'''
Line 456: Line 457:
|-
|-
|[[File:Con-tmfl-050-00.jpg|150px]]
|[[File:Con-tmfl-050-00.jpg|150px]]
|0.63 mm Tin Terminals 22-24 AWG
|0.63mm Tin Terminals 22-24AWG
|CON-TMFL-050-00
|CON-TMFL-050-00
|
|
Line 462: Line 463:
|-
|-
|[[File:Image_410.jpg|150px]]
|[[File:Image_410.jpg|150px]]
|1.5 mm Tin Terminals 18-20 AWG
|1.5mm Tin Terminals 18-20AWG
|CON-TMFL-049-00
|CON-TMFL-049-00
|
|
Line 486: Line 487:
|-
|-
|[[File:Con-plug-063-org.jpeg|150px]]
|[[File:Con-plug-063-org.jpeg|150px]]
|0.63 mm Plugs
|0.63mm Plugs
|CON-PLUG - .63MM 112-Pin
|CON-PLUG - .63MM 112-Pin
|
|
Line 492: Line 493:
|-
|-
|[[File:Con-plug-15-org.jpeg|150px]]
|[[File:Con-plug-15-org.jpeg|150px]]
|1.5 mm Plugs
|1.5mm Plugs
|CON-PLUG- 1.5MM 12-Pin
|CON-PLUG- 1.5MM 12-Pin
|
|
Line 518: Line 519:
|-
|-
|[[File:HARN-P112-001new.jpg|150px]]
|[[File:HARN-P112-001new.jpg|150px]]
|Pigtail Harness for ECM/GCM 112
|Pigtail Harness for ECM/GCM112
|HARN-P112-001  
|HARN-P112-001  
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/pigtail-harness-for-a-5554-112-12/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/pigtail-harness-for-a-5554-112-12/ Purchase]'''
Line 528: Line 529:
|-
|-
|[[File:HARN-P112-003.jpg|150px]]
|[[File:HARN-P112-003.jpg|150px]]
|Programming Harness for ECM/GCM 112
|Programming Harness for ECM/GCM112
|HARN-P112-003
|HARN-P112-003
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-5554-112-programming-harness/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-5554-112-programming-harness/ Purchase]'''
Line 538: Line 539:
|-
|-
|[[File:HARN-P112-002new.jpg|150px]]
|[[File:HARN-P112-002new.jpg|150px]]
|Development Harness for ECM/GCM 112
|Development Harness for ECM/GCM112
|HARN-P112-002
|HARN-P112-002
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-5554-112-development-harness/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/ecm-5554-112-development-harness/ Purchase]'''
Line 565: Line 566:
|-
|-
|[[File:ASM-CON-003-00.jpg|150px]]
|[[File:ASM-CON-003-00.jpg|150px]]
|Connector Kit includes: <br/><br/> (200) Terminals 18-20 AWG <br/>(2) 24-Position Connector (A Key) <br/>(2) 24-Position Connector (B Key)<br/>(1) 32-Position Connector <br/>(100) Plugs <br/>(4) Covers for 24-Position Connector <br/>(1) Cover for 32-Position Connector
|Connector Kit includes: <br/><br/> (200) Terminals 18-20AWG <br/>(2) 24-Position Connector (A Key) <br/>(2) 24-Position Connector (B Key)<br/>(1) 32-Position Connector <br/>(100) Plugs <br/>(4) Covers for 24-Position Connector <br/>(1) Cover for 32-Position Connector
|ASM-CON-003-00
|ASM-CON-003-00
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm565-128/ Purchase]'''
|'''[https://store.neweagle.net/shop/products/connectors-tools/harnesses-connectors-connectors-tools/for-non-raptor-controllers-harnesses-connectors-connectors-tools/connector-kit-ecm565-128/ Purchase]'''
Line 571: Line 572:
|-
|-
|[[File:Con-tmfl-002-00.jpg|150px]]
|[[File:Con-tmfl-002-00.jpg|150px]]
|Terminals 18-20 AWG
|Terminals 18-20AWG
|CON-TMFL-002-00
|CON-TMFL-002-00
|
|
Line 694: Line 695:


===Boot Cable Harnesses, Connectors and Keys===
===Boot Cable Harnesses, Connectors and Keys===
=====BOOT KEY FOR ECM555-48/80 GCM563-48 HCM563-48 ECM565-128 AND ECM5554-112=====
=====BOOT KEY FOR ECM555-48/80, GCM563-48, HCM563-48, ECM565-128 AND ECM5554-112=====
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 718: Line 719:


=Connector Crimp and Removal Tools=
=Connector Crimp and Removal Tools=
'''HAND CRIMP TOOL FOR SMART CRAFT AND 24-PIN MODULES'''
'''HAND CRIMP TOOL FOR SMARTCRAFT AND 24-PIN MODULES'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 729: Line 730:
[[File:TOOL-CON-001-00.jpg|150px]]
[[File:TOOL-CON-001-00.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Manufacturer suggested crimping tool for Motohawk ECM24
Manufacturer-suggested crimping tool for Motohawk ECM24
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-001-00
TOOL-CON-001-00
Line 738: Line 739:




'''HAND CRIMP TOOL FOR 24 PIN MODULES'''
'''HAND CRIMP TOOL FOR 24-PIN MODULES'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 749: Line 750:
[[File:Image 574.jpg|150px]]
[[File:Image 574.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Crimp Tool for 24 Pin Terminals
Crimp Tool for 24-Pin Terminals
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-002-00
TOOL-CON-002-00
Line 795: Line 796:
|}
|}


'''CRIMP TOOL FOR 48/80/128 PIN ECM PINS'''
'''CRIMP TOOL FOR 48/80/128-PIN ECM PINS'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 806: Line 807:
[[File:Image 577.jpg|150px]]
[[File:Image 577.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Crimp Tool for 48/80/128 Pin Terminals
Crimp Tool for 48/80/128-Pin Terminals
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-008-00
TOOL-CON-008-00
Line 825: Line 826:
[[File:Image 578.jpg|150px]]
[[File:Image 578.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Terminal Removal Tool for 48/80/128 Pin ECUs
Terminal Removal Tool for 48/80/128-Pin ECUs
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-009-00
TOOL-CON-009-00
Line 863: Line 864:
[[File:Tool-con-011.jpg|150px]]
[[File:Tool-con-011.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Crimp Tool for Smart Craft Terminals
Crimp Tool for SmartCraft Terminals
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-011-00
TOOL-CON-011-00
Line 891: Line 892:




'''CRIMPER - MOLEX .63MM FOR 112PIN CONTROLLER CONNECTORS'''
'''CRIMPER - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 902: Line 903:
[[File:Image 580.jpg|150px]]
[[File:Image 580.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Crimp Tool for Matte .63mm molex terminals
Crimp Tool for Matte 0.63mm Molex Terminals
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-016-MATTE (TOOL-GCM48-01)
TOOL-CON-016-MATTE (TOOL-GCM48-01)
Line 912: Line 913:




'''CRIMPER 1.5MM FOR 112 PIN ECM CONNECTORS'''
'''CRIMPER 1.5MM FOR 112-PIN ECM CONNECTORS'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 932: Line 933:




'''TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112 PIN CONTROLLER CONNECTORS'''
'''TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 943: Line 944:
[[File:Tool-con-018-matte.jpg|150px]]
[[File:Tool-con-018-matte.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Removal Tool for .63mm Molex Matte Terminals
Removal Tool for 0.63mm Molex Matte Terminals
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-018-MATTE
TOOL-CON-018


|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-5554-112-crimp-removal-tools-connectors-tools/terminal-removal-tool-0-63mm-for-112-pin-controller-matte-connectors/ Purchase]'''
'''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-5554-112-crimp-removal-tools-connectors-tools/terminal-removal-tool-0-63mm-for-112-pin-controller-gel-connectors/ Purchase]'''
|}
|}


'''TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112 PIN CONTROLLER'''
'''TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112-PIN CONTROLLER'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 963: Line 964:
[[File:Image 585.jpg|150px]]
[[File:Image 585.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Removal Tool for 1.5mm Molex Terminals
Removal Tool for 1.5mm Molex Terminals
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-019
TOOL-CON-019
Line 991: Line 992:
|}
|}


'''CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20 AWG'''
'''CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20AWG'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 1,010: Line 1,011:
|}
|}


'''CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16 AWG'''
'''CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG'''
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  
{| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"  


Line 1,021: Line 1,022:
[[File:TOOL-CON-022.jpg|150px]]
[[File:TOOL-CON-022.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16 AWG
CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-GCM70-03
TOOL-GCM70-03
Line 1,040: Line 1,041:
[[File:TOOL-CON-025.jpg|150px]]
[[File:TOOL-CON-025.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Terminal Removal Tool for ECM-70s
Terminal Removal Tool for ECM70s
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-GCM70-04
TOOL-GCM70-04
Line 1,078: Line 1,079:
[[File:TOOL-CON-0411-240-2005.jpg|150px]]
[[File:TOOL-CON-0411-240-2005.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Terminal Removal Tool for <br> 48/80/128 pin
Terminal Removal Tool for <br> 48/80/128-Pin
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
TOOL-CON-0411-240-2005
TOOL-CON-0411-240-2005

Latest revision as of 15:39, 6 February 2023

Introduction

- Pigtail Harness:  A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM.

- Development Harness:  Development harnesses are pigtail harnesses with power, ground, key-switch and communication wired. The harness is also covered in loom.

- Boot Harness:  A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file will be flashed onto the module.

- Programming Harness:  A programming harness contains only the necessary connections to communicate with and flash the module. This includes Battery, Ground, Wake_Input1 (KeySW), and CAN1+/-. 

- Simulator Harness:  Simulator harnesses are used in conjunction with a Desk Top Simulator.

24-Pin MotoHawk Module

24-Pin Module Connectors

Please note that cavity plugs are not used on the connector kits. Overview of 24-Pin Connector

Picture Product Part Number Webstore
Connector Kit includes:

(35) Terminals 20AWG
(1) Connector
(1) Black Retainer
(1) CPA
(1) Cable Seal
(1) Strain Relief 		ASM-CON-004 Purchase
Connector Kit includes:

(35) Terminals 20AWG
(1) Connector
(1) Clear Retainer
(1) CPA
(1) Cable Seal
(1) Strain Relief 		ASM-CON-006 Purchase
Terminals 20AWG CON-TMFL-034-00
Female Connector CON-FEML-035-00
Black Retainer CON-LOCK-013-00
Clear Retainer CON-LOCK-016-00
Connector Position Assurance (CPA) CON-LOCK-022-00
Cable Seal CON-SEAL-011-00
Strain Relief CON-STRN-003-00

24-Pin Module Pigtail Harnesses

Picture Product Part Number Webstore
Pigtail Harness for GCM S12-24 HARN-MCHI-001-DO Purchase
Pigtail Harness for S12-24 HARN-SECM-004-DO Purchase

24-Pin Module Programming and Boot Harnesses

Picture Product Part Number Webstore
Quick Programming Cable for ECM-S12-24 only HARN-SECM-012-00 Purchase
Boot Harness for ECM-S12-24 Module HARN-SECM-005-D1 Purchase

48-Pin MotoHawk Module

48-Pin Module Connectors

Picture Product Part Number Webstore
Connector Kit includes:

(55) Terminals 18-20AWG
(1) Connector (A Key)
(1) Connector (B Key)
(48) Plugs
(2) Covers 		ASM-CON-002-00 Purchase
Terminals 18-20AWG CON-TMFL-002-00
24-Channel Connector (A Key) CON-FEML-001A-00
24-Channel Connector (B Key) CON-FEML-001B-00
Connector Plug CON-PLUG-002-00
Connector Cover CON-COVR-001A-01

48-Pin Module Pigtail Harnesses

Picture Product Part Number Webstore
Pigtail Harness for ECM/GCM/HCM 48-Pin HARN-ECM-004-D0 Please contact sales

48-Pin Module Programming and Boot Harnesses

Picture Product Part Number Webstore
Quick Programming Cable for ECM 555-48 Module HARN-ECM-012 Please contact sales
Boot and Quick Programming Cable for ECM 563-48 Module HARN-ECM-013 Purchase
Boot Cable for GCM 563-48 Module HARN-ECM-022 Purchase
Quick Programming Cable for GCM/HCM 48 (a.k.a. Fire 48) HARN-PROG-009 Purchase

48-Pin Module Development Harnesses

Picture Product Part Number Webstore
Development Harness GCM/HCM 563-48 Module HARN-ECM-014 Please contact sales
Development Harness for ECM 563-48 Module HARN-ECM-027 Please contact sales
Development Harness for 555-48 Module HARN-ECM-007-00 Please contact sales

48-Pin Simulator Harnesses

Picture Product Part Number Webstore
Simulator Harness for 48-Pin ECM

Simulator Harness for 48-Pin GCM/HCM

HARN-INTR-024B

HARN-INTR-024C

Purchase

Purchase

70-Pin MotoHawk Module

70-Pin Module Connectors

Picture Product Part Number Webstore
Connector Kit includes:

(80) 0.63mm Terminals 18-20AWG
(8) 1.5mm Terminals 18-20AWG
(1) Female Connector
(15) 0.63mm Plugs
(5) 1.5mm Plugs
(1) Cover 		ASM-CON-046 Purchase
0.63mm Terminals 18-20AWG CON-TMFL-054-00
1.5mm Terminals 18-20AWG CON-TMFL-055-00
70-Channel Connector CON-FEML-056-00
0.63mm Plugs CON-PLUG - .63 MM 112-Pin
1.5mm Plugs CON-PLUG- 1.5 MM 12-Pin
Connector Cover CON-STRN-007

70-Pin Module Harnesses

Picture Product Part Number Webstore
Pigtail Harness

(S12X and SECM70)

HARN-GCM70-001 Purchase
Programming Harness

(S12X)

HARN-ECM-029 Purchase
Development Harness

(SECM7O)

HARN-SECM-DEV-70 Purchase
Development Harness

(S12X)

HARN-ECM-028 Purchase

80-Pin MotoHawk Module

80-Pin Module Connectors

Picture Product Part Number Webstore
Connector Kit includes:

(64) 0.63mm Tin Terminals 22-24AWG
(16) 1.5mm Tin Terminals 18-20AWG
(1) 32-Pin Matte Connector (A key)
(1) 48-Pin Matte Connector (B key)
(1) 32-Pin Connector Covers
(1) 48-Pin Connector Cover
(10) 0.63mm Plugs
(5) 1.5mm Plugs 		CON-KIT-RCM80 Purchase
Connector Kit includes:

(100) Terminals 18-20AWG
(1) 24-Position Connector (A Key)
(1) 24-Position Connector (B Key)
(1) 32-Position Connector
(100) Cavity Plugs
(2) Covers for 24-Position Connector
(1) Cover for 32-Position Connector 		ASM-CON-001-00 Purchase
Terminals 18-20AWG CON-TMFL-002-00
24-Channel Connector (A Key) CON-FEML-001A-00
24-Channel Connector (B Key) CON-FEML-001B-00
32-Channel Connector CON-FEML-002A-00
Connector Plug CON-PLUG-002-00
Cover for 24-Position Connector CON-COVR-001A-01
Cover for 32-Position Connector CON-COVR-001B-01

80-Pin Harnesses

Picture Product Part Number Webstore
Programming Harness HARN-PCM-012 Please contact sales
Development Harness HARN-PCM-008 Please contact sales
Simulator Harness HARN-INTR-025A Purchase

112-Pin MotoHawk Module

112-Pin Module Connectors

Picture Product Part Number Webstore
Connector Kit includes:

(100) 0.63mm Tin Terminals 22-24AWG
(34) 1.5mm Tin Terminals 18-20AWG
(1) 32-Pin Matte Connector (A key)
(1) 48-Pin Matte Connector (B key)
(1) 32-Pin Matte Connector (C key)
(2) 32-Pin Connector Covers
(1) 48-Pin Connector Cover
(10) 0.63mm Plugs
(5) 1.5mm Plugs 		ASM-CON-042-MATTE Purchase
Connector Kit includes:

(100) 0.63mm Gold Terminals 22-24AWG
(34) 1.5mm Gold Terminals 18-20AWG
(1) 32-Pin Matte Connector (A key)
(1) 48-Pin Matte Connector (B key)
(1) 32-Pin Matte Connector (C key)
(2) 32-Pin Connector Covers
(1) 48-Pin Connector Cover
(10) 0.63mm Plugs
(5) 1.5mm Plugs 		ASM-CON-042-OH Purchase
0.63mm Tin Terminals 22-24AWG CON-TMFL-050-00
1.5mm Tin Terminals 18-20AWG CON-TMFL-049-00
32-Pin Matte Connector (A key) CON-FEML-051-00
48-Pin Matte Connector (B key) CON-FEML-052-00
32-Pin Matte Connector (C key) CON-FEML-054-00
0.63mm Plugs CON-PLUG - .63MM 112-Pin
1.5mm Plugs CON-PLUG- 1.5MM 12-Pin
Cover for 32-Pin Connector CON-COVR-008
Cover for 48-Pin Connector CON-COVR-009

112-Pin Harnesses

Picture Product Part Number Webstore
Pigtail Harness for ECM/GCM112 HARN-P112-001 Purchase
Pigtail Harness for ECM-OH HARN-P112-001-OH Purchase
Programming Harness for ECM/GCM112 HARN-P112-003 Purchase
Programming Harness for ECM-OH HARN-P112-003-OH Purchase
Development Harness for ECM/GCM112 HARN-P112-002 Purchase
Development Harness for ECM-OH HARN-P122-002-OH Please contact sales
Simulator Harness HARN-INTR-026A Purchase

128-Pin MotoHawk Module

128-Pin Module Connectors

Picture Product Part Number Webstore
Connector Kit includes:

(200) Terminals 18-20AWG
(2) 24-Position Connector (A Key)
(2) 24-Position Connector (B Key)
(1) 32-Position Connector
(100) Plugs
(4) Covers for 24-Position Connector
(1) Cover for 32-Position Connector 		ASM-CON-003-00 Purchase
Terminals 18-20AWG CON-TMFL-002-00
24-Position Connector (A Key) CON-FEML-001A-00
24-Position Connector (B Key) CON-FEML-001B-00
32-Position Connector CON-FEML-002A-00
Connector Plug CON-PLUG-002-00
Cover for 24-Position Connector CON-COVR-001A-01
Cover for 32-Position Connector CON-COVR-001B-01

128-Pin Harnesses

Picture Product Part Number Webstore
Simulator Harness HARN-INTR-027A Please contact sales
VeeCAN 128 DISPLAY POWER AND PROGRAMMING HARNESS HARN-CAN-DP-128 Purchase

Mounting Hardware

Picture Product Part Number Webstore
1 Mounting Hardware Kit for MotoHawk Module
(3 bushings, 3 washers, 3 rubber grommets) 		ASM-MOUN-002-00 Purchase
30 Mounting Hardware Kits for MotoHawk Modules
(90 bushings, 90 washers, 90 rubber grommets) 		ASM-MOUN-001-01 Purchase
1 Aluminum Bushing Kit for a MotoHawk Module
(3 bushings) 		BUSH-ALUM-001-00
2212 Aluminum Bushings for MotoHawk Modules ASM-MOUN-008-00 Purchase
1 Rubber Grommet Kit for a MotoHawk Module
(3 grommets) 		GRMT-RBBR-001-00 Purchase
4000 Rubber Grommets for MotoHawk Module ASM-MOUN-007-00 Purchase
1 Washer Kit for a MotoHawk Module
(3 washers) 		WASH-FLAT-002-00
5000 Washers for MotoHawk Modules ASM-MOUN-006-00 Purchase


Boot Cable Harnesses, Connectors and Keys

BOOT KEY FOR ECM555-48/80, GCM563-48, HCM563-48, ECM565-128 AND ECM5554-112
Picture Product Part Number Webstore

Boot Key Information can be found here: Boot Key Recovery

HARN-INTR-008-01

Purchase

Connector Crimp and Removal Tools

HAND CRIMP TOOL FOR SMARTCRAFT AND 24-PIN MODULES

Picture Product Part Number Webstore

Manufacturer-suggested crimping tool for Motohawk ECM24

TOOL-CON-001-00

Purchase


HAND CRIMP TOOL FOR 24-PIN MODULES

Picture Product Part Number Webstore

Crimp Tool for 24-Pin Terminals

TOOL-CON-002-00

Purchase

REMOVAL TOOL - SMARTCRAFT TPA

Picture Product Part Number Webstore

TPA Removal Tool

TOOL-CON-004-00

Purchase

REMOVAL TOOL - SMARTCRAFT TERMINALS

Picture Product Part Number Webstore

Terminal Removal Tool

TOOL-CON-005-00

Purchase

CRIMP TOOL FOR 48/80/128-PIN ECM PINS

Picture Product Part Number Webstore

Crimp Tool for 48/80/128-Pin Terminals

TOOL-CON-008-00

Purchase

EXTRACTION TOOL FOR 48/80/128 ECM PINS

Picture Product Part Number Webstore

Terminal Removal Tool for 48/80/128-Pin ECUs

TOOL-CON-009-00

Purchase

CRIMPER FOR RELAY TERMINALS

Picture Product Part Number Webstore

Crimp Tool for Delphi 630 Series Terminals

TOOL-CON-010-00

Please contact sales

CRIMPER - SMARTCRAFT TERMINALS

Picture Product Part Number Webstore

Crimp Tool for SmartCraft Terminals

TOOL-CON-011-00

Purchase

CRIMPER - DEUTSCH HDT48-00

Picture Product Part Number Webstore

Deutsch HDT48-00 Terminal Crimper

TOOL-CON-015-00

Purchase


CRIMPER - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS

Picture Product Part Number Webstore

Crimp Tool for Matte 0.63mm Molex Terminals

TOOL-CON-016-MATTE (TOOL-GCM48-01)

Purchase


CRIMPER 1.5MM FOR 112-PIN ECM CONNECTORS

Picture Product Part Number Webstore

Crimp Tool for 1.5mm Molex Matte Terminals

TOOL-CON-017-MATTE (TOOL-GCM48-02)

Purchase


TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS

Picture Product Part Number Webstore

Removal Tool for 0.63mm Molex Matte Terminals

TOOL-CON-018

Purchase

TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112-PIN CONTROLLER

Picture Product Part Number Webstore

Removal Tool for 1.5mm Molex Terminals

TOOL-CON-019

Purchase


CRIMPER - SMALL TYCO TERMINAL ECM70

Picture Product Part Number Webstore

Crimp Tool for small Tyco Terminals

TOOL-GCM70-01

Purchase

CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20AWG

Picture Product Part Number Webstore

Crimp Tool for Large Tyco Terminals

TOOL-GCM70-02

Purchase

CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG

Picture Product Part Number Webstore

CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG

TOOL-GCM70-03

Purchase

TERMINAL REMOVAL FOR ECM70

Picture Product Part Number Webstore

Terminal Removal Tool for ECM70s

TOOL-GCM70-04

Purchase

REMOVAL TOOL - CM0711 and CM3626 MODULES

Picture Product Part Number Webstore

Terminal Removal Tool for
CM0711 and CM3626 Modules

TOOL-CON-0411-336-1605

Purchase

REMOVAL TOOL 48/80/128

Picture Product Part Number Webstore

Terminal Removal Tool for
48/80/128-Pin

TOOL-CON-0411-240-2005

Purchase

REMOVAL TOOL - CM2115 MODULES

Picture Product Part Number Webstore

Removal Tool - CM2115 Modules

TOOL-CON-DT-RT1

Please contact sales

CRIMPER TOOL - VEECAN DISPLAYS

Picture Product Part Number Webstore

Crimp Tool - VeeCAN Displays
(1062-16-0622 Terminals)

TOOL-CON-DTT-16-01

Purchase

Retrieved from "https://wiki.neweagle.net//index.php?title=MotoHawk-Module-Harnesses-and-Connectors&oldid=30985"