Latest revision as of 15:39, 6 February 2023

Introduction

- Pigtail Harness: A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM.

- Development Harness: Development harnesses are pigtail harnesses with power, ground, key-switch and communication wired. The harness is also covered in loom.

- Boot Harness: A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file will be flashed onto the module.

- Programming Harness: A programming harness contains only the necessary connections to communicate with and flash the module. This includes Battery, Ground, Wake_Input1 (KeySW), and CAN1+/-.

- Simulator Harness: Simulator harnesses are used in conjunction with a Desk Top Simulator.

24-Pin MotoHawk Module

24-Pin Module Connectors

Please note that cavity plugs are not used on the connector kits. Overview of 24-Pin Connector

Product	Part Number	Webstore
Connector Kit includes: (35) Terminals 20AWG (1) Connector (1) Black Retainer (1) CPA (1) Cable Seal (1) Strain Relief	ASM-CON-004	Purchase
Connector Kit includes: (35) Terminals 20AWG (1) Connector (1) Clear Retainer (1) CPA (1) Cable Seal (1) Strain Relief	ASM-CON-006	Purchase
Terminals 20AWG	CON-TMFL-034-00
Female Connector	CON-FEML-035-00
Black Retainer	CON-LOCK-013-00
Clear Retainer	CON-LOCK-016-00
Connector Position Assurance (CPA)	CON-LOCK-022-00
Cable Seal	CON-SEAL-011-00
Strain Relief	CON-STRN-003-00

24-Pin Module Pigtail Harnesses

Picture	Product	Part Number	Webstore
	Pigtail Harness for GCM S12-24	HARN-MCHI-001-DO	Purchase
	Pigtail Harness for S12-24	HARN-SECM-004-DO	Purchase

24-Pin Module Programming and Boot Harnesses

Picture	Product	Part Number	Webstore
	Quick Programming Cable for ECM-S12-24 only	HARN-SECM-012-00	Purchase
	Boot Harness for ECM-S12-24 Module	HARN-SECM-005-D1	Purchase

48-Pin MotoHawk Module

48-Pin Module Connectors

Product	Part Number	Webstore
Connector Kit includes: (55) Terminals 18-20AWG (1) Connector (A Key) (1) Connector (B Key) (48) Plugs (2) Covers	ASM-CON-002-00	Purchase
Terminals 18-20AWG	CON-TMFL-002-00
24-Channel Connector (A Key)	CON-FEML-001A-00
24-Channel Connector (B Key)	CON-FEML-001B-00
Connector Plug	CON-PLUG-002-00
Connector Cover	CON-COVR-001A-01

48-Pin Module Pigtail Harnesses

Picture	Product	Part Number	Webstore
	Pigtail Harness for ECM/GCM/HCM 48-Pin	HARN-ECM-004-D0	Please contact sales

48-Pin Module Programming and Boot Harnesses

Product	Part Number	Webstore
Quick Programming Cable for ECM 555-48 Module	HARN-ECM-012	Please contact sales
Boot and Quick Programming Cable for ECM 563-48 Module	HARN-ECM-013	Purchase
Boot Cable for GCM 563-48 Module	HARN-ECM-022	Purchase
Quick Programming Cable for GCM/HCM 48 (a.k.a. Fire 48)	HARN-PROG-009	Purchase

48-Pin Module Development Harnesses

Product	Part Number	Webstore
Development Harness GCM/HCM 563-48 Module	HARN-ECM-014	Please contact sales
Development Harness for ECM 563-48 Module	HARN-ECM-027	Please contact sales
Development Harness for 555-48 Module	HARN-ECM-007-00	Please contact sales

48-Pin Simulator Harnesses

Picture	Product	Part Number	Webstore
	Simulator Harness for 48-Pin ECM Simulator Harness for 48-Pin GCM/HCM	HARN-INTR-024B HARN-INTR-024C	Purchase Purchase

70-Pin MotoHawk Module

70-Pin Module Connectors

Product	Part Number	Webstore
Connector Kit includes: (80) 0.63mm Terminals 18-20AWG (8) 1.5mm Terminals 18-20AWG (1) Female Connector (15) 0.63mm Plugs (5) 1.5mm Plugs (1) Cover	ASM-CON-046	Purchase
0.63mm Terminals 18-20AWG	CON-TMFL-054-00
1.5mm Terminals 18-20AWG	CON-TMFL-055-00
70-Channel Connector	CON-FEML-056-00
0.63mm Plugs	CON-PLUG - .63 MM 112-Pin
1.5mm Plugs	CON-PLUG- 1.5 MM 12-Pin
Connector Cover	CON-STRN-007

70-Pin Module Harnesses

Product	Part Number	Webstore
Pigtail Harness (S12X and SECM70)	HARN-GCM70-001	Purchase
Programming Harness (S12X)	HARN-ECM-029	Purchase
Development Harness (SECM7O)	HARN-SECM-DEV-70	Purchase
Development Harness (S12X)	HARN-ECM-028	Purchase

80-Pin MotoHawk Module

80-Pin Module Connectors

Product	Part Number	Webstore
Connector Kit includes: (64) 0.63mm Tin Terminals 22-24AWG (16) 1.5mm Tin Terminals 18-20AWG (1) 32-Pin Matte Connector (A key) (1) 48-Pin Matte Connector (B key) (1) 32-Pin Connector Covers (1) 48-Pin Connector Cover (10) 0.63mm Plugs (5) 1.5mm Plugs	CON-KIT-RCM80	Purchase
Connector Kit includes: (100) Terminals 18-20AWG (1) 24-Position Connector (A Key) (1) 24-Position Connector (B Key) (1) 32-Position Connector (100) Cavity Plugs (2) Covers for 24-Position Connector (1) Cover for 32-Position Connector	ASM-CON-001-00	Purchase
Terminals 18-20AWG	CON-TMFL-002-00
24-Channel Connector (A Key)	CON-FEML-001A-00
24-Channel Connector (B Key)	CON-FEML-001B-00
32-Channel Connector	CON-FEML-002A-00
Connector Plug	CON-PLUG-002-00
Cover for 24-Position Connector	CON-COVR-001A-01
Cover for 32-Position Connector	CON-COVR-001B-01

80-Pin Harnesses

Product	Part Number	Webstore
Programming Harness	HARN-PCM-012	Please contact sales
Development Harness	HARN-PCM-008	Please contact sales
Simulator Harness	HARN-INTR-025A	Purchase

112-Pin MotoHawk Module

112-Pin Module Connectors

Product	Part Number	Webstore
Connector Kit includes: (100) 0.63mm Tin Terminals 22-24AWG (34) 1.5mm Tin Terminals 18-20AWG (1) 32-Pin Matte Connector (A key) (1) 48-Pin Matte Connector (B key) (1) 32-Pin Matte Connector (C key) (2) 32-Pin Connector Covers (1) 48-Pin Connector Cover (10) 0.63mm Plugs (5) 1.5mm Plugs	ASM-CON-042-MATTE	Purchase
Connector Kit includes: (100) 0.63mm Gold Terminals 22-24AWG (34) 1.5mm Gold Terminals 18-20AWG (1) 32-Pin Matte Connector (A key) (1) 48-Pin Matte Connector (B key) (1) 32-Pin Matte Connector (C key) (2) 32-Pin Connector Covers (1) 48-Pin Connector Cover (10) 0.63mm Plugs (5) 1.5mm Plugs	ASM-CON-042-OH	Purchase
0.63mm Tin Terminals 22-24AWG	CON-TMFL-050-00
1.5mm Tin Terminals 18-20AWG	CON-TMFL-049-00
32-Pin Matte Connector (A key)	CON-FEML-051-00
48-Pin Matte Connector (B key)	CON-FEML-052-00
32-Pin Matte Connector (C key)	CON-FEML-054-00
0.63mm Plugs	CON-PLUG - .63MM 112-Pin
1.5mm Plugs	CON-PLUG- 1.5MM 12-Pin
Cover for 32-Pin Connector	CON-COVR-008
Cover for 48-Pin Connector	CON-COVR-009

112-Pin Harnesses

Product	Part Number	Webstore
Pigtail Harness for ECM/GCM112	HARN-P112-001	Purchase
Pigtail Harness for ECM-OH	HARN-P112-001-OH	Purchase
Programming Harness for ECM/GCM112	HARN-P112-003	Purchase
Programming Harness for ECM-OH	HARN-P112-003-OH	Purchase
Development Harness for ECM/GCM112	HARN-P112-002	Purchase
Development Harness for ECM-OH	HARN-P122-002-OH	Please contact sales
Simulator Harness	HARN-INTR-026A	Purchase

128-Pin MotoHawk Module

128-Pin Module Connectors

Product	Part Number	Webstore
Connector Kit includes: (200) Terminals 18-20AWG (2) 24-Position Connector (A Key) (2) 24-Position Connector (B Key) (1) 32-Position Connector (100) Plugs (4) Covers for 24-Position Connector (1) Cover for 32-Position Connector	ASM-CON-003-00	Purchase
Terminals 18-20AWG	CON-TMFL-002-00
24-Position Connector (A Key)	CON-FEML-001A-00
24-Position Connector (B Key)	CON-FEML-001B-00
32-Position Connector	CON-FEML-002A-00
Connector Plug	CON-PLUG-002-00
Cover for 24-Position Connector	CON-COVR-001A-01
Cover for 32-Position Connector	CON-COVR-001B-01

128-Pin Harnesses

Picture	Product	Part Number	Webstore
	Simulator Harness	HARN-INTR-027A	Please contact sales
	VeeCAN 128 DISPLAY POWER AND PROGRAMMING HARNESS	HARN-CAN-DP-128	Purchase

Mounting Hardware

Product	Part Number	Webstore
1 Mounting Hardware Kit for MotoHawk Module (3 bushings, 3 washers, 3 rubber grommets)	ASM-MOUN-002-00	Purchase
30 Mounting Hardware Kits for MotoHawk Modules (90 bushings, 90 washers, 90 rubber grommets)	ASM-MOUN-001-01	Purchase
1 Aluminum Bushing Kit for a MotoHawk Module (3 bushings)	BUSH-ALUM-001-00
2212 Aluminum Bushings for MotoHawk Modules	ASM-MOUN-008-00	Purchase
1 Rubber Grommet Kit for a MotoHawk Module (3 grommets)	GRMT-RBBR-001-00	Purchase
4000 Rubber Grommets for MotoHawk Module	ASM-MOUN-007-00	Purchase
1 Washer Kit for a MotoHawk Module (3 washers)	WASH-FLAT-002-00
5000 Washers for MotoHawk Modules	ASM-MOUN-006-00	Purchase

Boot Cable Harnesses, Connectors and Keys

BOOT KEY FOR ECM555-48/80, GCM563-48, HCM563-48, ECM565-128 AND ECM5554-112

Picture	Product	Part Number	Webstore
	Boot Key Information can be found here: Boot Key Recovery	HARN-INTR-008-01	Purchase

Connector Crimp and Removal Tools

HAND CRIMP TOOL FOR SMARTCRAFT AND 24-PIN MODULES

Picture	Product	Part Number	Webstore
	Manufacturer-suggested crimping tool for Motohawk ECM24	TOOL-CON-001-00	Purchase

HAND CRIMP TOOL FOR 24-PIN MODULES

Picture	Product	Part Number	Webstore
	Crimp Tool for 24-Pin Terminals	TOOL-CON-002-00	Purchase

REMOVAL TOOL - SMARTCRAFT TPA

Picture	Product	Part Number	Webstore
	TPA Removal Tool	TOOL-CON-004-00	Purchase

REMOVAL TOOL - SMARTCRAFT TERMINALS

Picture	Product	Part Number	Webstore
	Terminal Removal Tool	TOOL-CON-005-00	Purchase

CRIMP TOOL FOR 48/80/128-PIN ECM PINS

Picture	Product	Part Number	Webstore
	Crimp Tool for 48/80/128-Pin Terminals	TOOL-CON-008-00	Purchase

EXTRACTION TOOL FOR 48/80/128 ECM PINS

Picture	Product	Part Number	Webstore
	Terminal Removal Tool for 48/80/128-Pin ECUs	TOOL-CON-009-00	Purchase

CRIMPER FOR RELAY TERMINALS

Picture	Product	Part Number	Webstore
	Crimp Tool for Delphi 630 Series Terminals	TOOL-CON-010-00	Please contact sales

CRIMPER - SMARTCRAFT TERMINALS

Picture	Product	Part Number	Webstore
	Crimp Tool for SmartCraft Terminals	TOOL-CON-011-00	Purchase

CRIMPER - DEUTSCH HDT48-00

Picture	Product	Part Number	Webstore
	Deutsch HDT48-00 Terminal Crimper	TOOL-CON-015-00	Purchase

CRIMPER - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS

Picture	Product	Part Number	Webstore
	Crimp Tool for Matte 0.63mm Molex Terminals	TOOL-CON-016-MATTE (TOOL-GCM48-01)	Purchase

CRIMPER 1.5MM FOR 112-PIN ECM CONNECTORS

Picture	Product	Part Number	Webstore
	Crimp Tool for 1.5mm Molex Matte Terminals	TOOL-CON-017-MATTE (TOOL-GCM48-02)	Purchase

TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS

Picture	Product	Part Number	Webstore
	Removal Tool for 0.63mm Molex Matte Terminals	TOOL-CON-018	Purchase

TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112-PIN CONTROLLER

Picture	Product	Part Number	Webstore
	Removal Tool for 1.5mm Molex Terminals	TOOL-CON-019	Purchase

CRIMPER - SMALL TYCO TERMINAL ECM70

Picture	Product	Part Number	Webstore
	Crimp Tool for small Tyco Terminals	TOOL-GCM70-01	Purchase

CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20AWG

Picture	Product	Part Number	Webstore
	Crimp Tool for Large Tyco Terminals	TOOL-GCM70-02	Purchase

CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG

Picture	Product	Part Number	Webstore
	CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG	TOOL-GCM70-03	Purchase

TERMINAL REMOVAL FOR ECM70

Picture	Product	Part Number	Webstore
	Terminal Removal Tool for ECM70s	TOOL-GCM70-04	Purchase

REMOVAL TOOL - CM0711 and CM3626 MODULES

Picture	Product	Part Number	Webstore
	Terminal Removal Tool for CM0711 and CM3626 Modules	TOOL-CON-0411-336-1605	Purchase

REMOVAL TOOL 48/80/128

Picture	Product	Part Number	Webstore
	Terminal Removal Tool for 48/80/128-Pin	TOOL-CON-0411-240-2005	Purchase

REMOVAL TOOL - CM2115 MODULES

Picture	Product	Part Number	Webstore
	Removal Tool - CM2115 Modules	TOOL-CON-DT-RT1	Please contact sales

CRIMPER TOOL - VEECAN DISPLAYS

Picture	Product	Part Number	Webstore
	Crimp Tool - VeeCAN Displays (1062-16-0622 Terminals)	TOOL-CON-DTT-16-01	Purchase

@@ Line 892: / Line 892: @@
-'''CRIMPER - MOLEX .63 MM FOR 112-PIN CONTROLLER CONNECTORS'''
+'''CRIMPER - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 903: / Line 903: @@
 [[File:Image 580.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Crimp Tool for Matte .63 mm Molex Terminals
+Crimp Tool for Matte 0.63mm Molex Terminals
 |style = "height:180px; width:180px;"|
 TOOL-CON-016-MATTE (TOOL-GCM48-01)
@@ Line 913: / Line 913: @@
-'''CRIMPER 1.5 MM FOR 112-PIN ECM CONNECTORS'''
+'''CRIMPER 1.5MM FOR 112-PIN ECM CONNECTORS'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 924: / Line 924: @@
 [[File:Image 581.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Crimp Tool for 1.5 mm Molex Matte Terminals
+Crimp Tool for 1.5mm Molex Matte Terminals
 |style = "height:180px; width:180px;"|
 TOOL-CON-017-MATTE (TOOL-GCM48-02)
@@ Line 933: / Line 933: @@
-'''TERMINAL REMOVAL TOOL - MOLEX 0.63 MM FOR 112-PIN CONTROLLER CONNECTORS'''
+'''TERMINAL REMOVAL TOOL - MOLEX 0.63MM FOR 112-PIN CONTROLLER CONNECTORS'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 944: / Line 944: @@
 [[File:Tool-con-018-matte.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Removal Tool for .63 mm Molex Matte Terminals
+Removal Tool for 0.63mm Molex Matte Terminals
 |style = "height:180px; width:180px;"|
 TOOL-CON-018
@@ Line 952: / Line 952: @@
 |}
-'''TERMINAL REMOVAL TOOL - MOLEX 1.5 MM FOR 112-PIN CONTROLLER'''
+'''TERMINAL REMOVAL TOOL - MOLEX 1.5MM FOR 112-PIN CONTROLLER'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 964: / Line 964: @@
 [[File:Image 585.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Removal Tool for 1.5 mm Molex Terminals
+Removal Tool for 1.5mm Molex Terminals
 |style = "height:180px; width:180px;"|
 TOOL-CON-019
@@ Line 973: / Line 973: @@
-'''CRIMPER - SMALL TYCO TERMINAL ECM 70'''
+'''CRIMPER - SMALL TYCO TERMINAL ECM70'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 1,030: / Line 1,030: @@
 |}
-'''TERMINAL REMOVAL FOR ECM 70'''
+'''TERMINAL REMOVAL FOR ECM70'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 1,041: / Line 1,041: @@
 [[File:TOOL-CON-025.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Terminal Removal Tool for ECM 70s
+Terminal Removal Tool for ECM70s
 |style = "height:180px; width:180px;"|
 TOOL-GCM70-04
@@ Line 1,049: / Line 1,049: @@
 |}
-'''REMOVAL TOOL - CM 0711 and CM 3626 MODULES'''
+'''REMOVAL TOOL - CM0711 and CM3626 MODULES'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 1,060: / Line 1,060: @@
 [[File:TOOL-CON-0411-336-1605.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Terminal Removal Tool for <br> CM 0711 and CM 3626 Modules
+Terminal Removal Tool for <br> CM0711 and CM3626 Modules
 |style = "height:180px; width:180px;"|
 TOOL-CON-0411-336-1605
@@ Line 1,086: / Line 1,086: @@
 '''[https://store.neweagle.net/shop/products/connectors-tools/crimp-removal-tools-connectors-tools/ecm-555-48-crimp-removal-tools-connectors-tools/removal-tool-48-80-128/ Purchase]'''
 |}
-'''REMOVAL TOOL - CM 2115 MODULES'''
+'''REMOVAL TOOL - CM2115 MODULES'''
 {| class="wikitable" style="text-align: center; width:850px" cellpadding = "5"
@@ Line 1,097: / Line 1,097: @@
 [[File:TOOL-CON-DT-RT1.jpg|150px]]
 |style = "height:180px; width:180px;"|
-Removal Tool - CM 2115 Modules
+Removal Tool - CM2115 Modules
 |style = "height:180px; width:180px;"|
 TOOL-CON-DT-RT1

MotoHawk-Module-Harnesses-and-Connectors: Difference between revisions