Module Configuration Blocks: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
(Created page with '== I == === MotoHawk: Blocks: Interface VRDG === === MotoHawk: Blocks: Interface VRDG FiltVR === == S == === MotoHawk: Blocks: Set Passive Pull Strength === === MotoHawk: Bl…')
 
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:


=== MotoHawk: Blocks: Interface VRDG ===
=== MotoHawk: Blocks: Interface VRDG ===
Defines the interface for the selected resource.
[[image:VRDG.jpg]]


=== MotoHawk: Blocks: Interface VRDG FiltVR ===
=== MotoHawk: Blocks: Interface VRDG FiltVR ===
Defines the interface for the selected resource.
[[image:VRDG_FiltVR.jpg]]


== S ==
== S ==


=== MotoHawk: Blocks: Set Passive Pull Strength ===
=== MotoHawk: Blocks: Set Passive Pull Strength ===
Set the passive pull-up / pull-down strength for the selected resource.
[[image:Passive_Pull_Strength.jpg]]


=== MotoHawk: Blocks: Set Pull Direction ===
=== MotoHawk: Blocks: Set Pull Direction ===
Set the direction of the passive pull device to either pull-up or pull-down on the named resource.
[[image:Set_Pull_Direction.jpg]]
=== Notes: ===
Parameters marked with * can be calibrated when the checkbox is selected

Latest revision as of 13:43, 20 March 2012

I

MotoHawk: Blocks: Interface VRDG

Defines the interface for the selected resource.

MotoHawk: Blocks: Interface VRDG FiltVR

Defines the interface for the selected resource.

S

MotoHawk: Blocks: Set Passive Pull Strength

Set the passive pull-up / pull-down strength for the selected resource.

MotoHawk: Blocks: Set Pull Direction

Set the direction of the passive pull device to either pull-up or pull-down on the named resource.

Notes:

Parameters marked with * can be calibrated when the checkbox is selected