Data-Loggers

Low-Cost CAN Based Data Logger

Part Number	Picture	Visit our Webstore	Download	More Information
NETM-CDL-001		NETM-CDL-001	New Eagle CANLogger Datasheet New Eagle CANLogger User Manual

Part Number	Picture	Visit our Webstore	Download	More Information
Coming Soon		NETM-CDL-001	New Eagle CANLogger Datasheet New Eagle CANLogger User Manual

The logger utilizes standard SD cards for data storage making it easy to retrieve data for applications including Event Data Logging (EDR). This device is capable of logging at rates of 1ms, making it an ideal choice for any CAN bus environment. Built in key switch detection and keep-alive circuitry ensure clean shutdowns and proper file closures.

Features

• CAN data logging
  • Easily log CAN bus data to an SD card
  • Utilize configuration files to limit desired data or change CAN bus speed
  • Data logging is limited only by the size of the SD card, right now 16GB cards are the largest supported.
• Real-time clock with battery backup providing date/time information for log files
• Firmware updates via SD Card
• Optional key switch detection
• Optional Configurable warning horn
• Status LED’s
  • State of Health
  • SD Card Presence and data logging
  • Indicators for CAN Tx/Rx Traffic and Bus errors
  • The log file is a text file format that lists all the CAN messages. This allows the user to import the data into excel or other programs.

FAQs

SD Cards

The data logger should be able to work with most SD cards. However, to help customers a selection of SD cards has been tested and verified to work. This list will be added to as more cards are tested. If you find a card that works well, let us know and we can test and add it to the list. The current approved SD cards are:

• SanDisk SDHC – Class 4 – 4GB
• SanDisk Ultra HCI – Class 6 – 4GB
• PNY HC – Class 10 – 8GB
• SanDisk Ultra HCII – Class 4 – 8GB
• SanDisk Extreme HD HCI – Class 10 – 8GB
• SanDisk Extreme SDHC – Class 10 – 16GB

SD Card Errors

Unfortunately, we cannot guarantee the approved SD cards will work as needed because not all SD Cards are built equally. From our experience, the above SD Cards are the most reliable.

Log File Name

The log file name needs to be LOGGER.MEC with all caps. Other names might load and work with the logger. However, the logger software might not pick up other names.

Auto Flush

A new auto flush feature has been added. This feature has the data logger back up the CAN information more often to the SD card. This means that data will be on the card if power is lost. If the option is not selected the SD card will back up, but not as often meaning data will be lost. The downside to the auto flush feature is that it lowers the performance of the data logger, so it cannot log as many messages.

Projects that seek to eliminate the key switch functionality should enable Auto Flush to ensure data capture.

Extending User Action Button

The digital input is used to extend the user action button. When the input the unit will act as if the user action has been pressed. This allows you to use the action button when the data logger is installed elsewhere in the system. This feature is toggled by creating a switch that will pull the digital input pin (Pin 6) to ground.

Voltage Spikes Above Operating Range

The unit is load dump protected up to 60v, though when the voltage rises above 33v the unit will shut down. Therefore during transients like these the unit will be non-operational and self-recover when the input voltage returns to within specification.

Circular Data Logging

A circular data logging system based upon memory size of the SD card, instead of key cycles, will be available September to October of 2013.

How to Log Data

Logging data for the unit is very easy and straight forward, and involves setting up a short configuration file. This just takes a couple lines for the header and then a list of all the CAN messages you want to monitor. There are a couple of advanced fault options, but those are easy to use as well. You delete all files on the SD card and load the configuration file so it is the only file on the card. Next insert the SD card into the unit. The unit then has 8 LEDs and an action button. The datasheet tells you what each LED means, they include if CAN messaging is active on the bus, if the unit is recording, is there a fault, etc. The action button allows you to pause the data reading and to signal events to place a marker to be looked at.

When you are done pull the card out and plug it into the computer. There is a simple text file with all the CAN messages listed. This text file is formatted so that it can be imported into almost any CAN analyzing software.

There is also a free GUI that allows the user to more easily create the configuration file. That tool can be downloaded below.

Configuration File Tool

New Eagle CANLogger Configuration File Program

Software Update

The file to update the Datalogger to version 1.021 can be downloaded here, Update File.

Datasheets

New Eagle CANLogger Datasheet

New Eagle CANLogger User Manual

Webstore

Webstore: New Eagle CANLogger