Displays

This Page is currently under construction.

Kongsberg Embedded Displays

CANtrak 2600

The CANtrak 2600 is an intelligent, multi-function display. It monitors numerous CAN based messages and displays the current status of user defined parameters. With its J1939 or custom CAN capability, the CANtrak offers easy integration into a CAN-based control system of MotoHawk® or 3rd party electronics for virtually any type of on-road or off-road vehicle.

Features include:

• 3.8" Graphical high resolution LCD Display, Rugged ABS Case
• IP67 Protection Rating
• Low operating temperature: -25C
• RS232, J1708/J1587 and CANbus datalink compatible
• Front and rear mountable, CE Approved design

CANtrak 2610

Similar to the CANtrak 2600, CANtrak 2610 is an intelligent, multi-function display, offering easy integration into a CAN-based control system of MotoHawk®.

Features include:

• 3.8" Graphical high resolution LCD Display, Rugged ABS Case
• IP67 Protection Rating
• Low operating temperature: -40C
• RS232, J1708/J1587 and CANbus datalink compatible
• Front and rear mountable, CE Approved design

CANtrak 2610 CSA Certified

Features include

• Class I, Division 2, Groups A, B, C, D
• 3.8" Graphical high resolution LCD Display, Rugged ABS Case
• IP67 Protection Rating
• Low operating temperature: -40C
• RS232, J1708/J1587 and CANbus datalink compatible
• Front and rear mountable, CE Approved design

CANtrak 1800 Display

Compact, multifunction, industrial vehicle display. 74 x 74 mm overall size with 2.3" screen and connects directly to J1929 CANbus to display wide range of engine and vehicle parameters. Includes warning light to notify user of an active alarm and screen layouts configured using illuminated soft keys. Operating temperature to (-30 to 75°C). Launch date Q3 2010.

MiniView

This rugged display unit is capable of operating in harsh marine and off-highway applications. Designed to operate with the MotoHawk® line of rugged controllers, the circular display (65 pixels high, 65 pixels wide, 4 built-in fonts, adjustable backlight) is controlled from the customer application via the MiniView CAN interface, typically using the MotoHawk® block set. Custom gauge programming can be provided upon request. Custom bezels may also be ordered.

Click Here for CANtrak Connecting and Programming Help

Click Here to see other Kongsberg Products

CANtrak Harnesses

CANtrak Configurable Input Harness

CANtrak Configurable Input Module Harnesses - Development Cable Set

CANtrak Display Power Harness

This pre-assembled power harness for CANtrak consists of a mating connector to plug into the display and 1.5m long flying leads for connection to the vehicle or equipment.

Alternatively, a connector kit is available for customers wishing to manufacture their own wiring harnesses.