Raptor:Standard Fault Definition: Difference between revisions

Revision as of 15:13, 4 March 2014

This block defines a fault and set its status. The Raptor Fault Manager block must exist in the model to use this block.

Input	Type	Description

Output	Type	Description

Parameter	Type	Description
Fault Name	String	Defines the name of the fault. Must be a valid C identifier.
Persistent		Defines if the fault is persistent (state is remembered through a power cycle).
Sticky		Defines if the fault is sticky (must be cleared to stop being active).
X Count	Number	Input status must be true for this many count out of the last Y to set the fault as Active.
Y Count	Number	Number of executions to track input status over.
Calibratable X/Y Count		Allows the X and Y count limits to be changed in the calibtation tool.
Access Level		Sets the access level of X/Y limits in the calibration tool.
Function	String	Sets the location where the X/Y limit appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.

@@ Line 3: / Line 3: @@
 [[Raptor:Faults|Return to Faults page]]
-[[File:RaptorStandardFaultDefinition.jpg|right|frame|Raptor Standard Fault Definition]]
+[[File:RaptorStandardFaultDefinition.jpg|right|frame|Raptor™ Standard Fault Definition]]
 == Description ==