Raptor:Fault Manager: Difference between revisions

Revision as of 15:14, 4 March 2014

Description

This block causes the fault manager to be generated. The fault manager must exist only once in the model to enable the fault blocks to be used. There are different types of fault manager which contain different features and options. Currently supported types are Standard and OBD Fault Manager.

Inputs

Input	Type	Description

Outputs

Output	Type	Description

Parameters

Parameter	Type	Description
Fault Map Tool		Launches the fault map tool used to map fault actions and triggers to faults.
Type		Chooses the type of fault manager.
Calibratable Fault Map		This enables the fault action and triggers maps to be calibrated from the calibration tool.
Min Fault Actions / Fault	Number	Controls the minimum number of fault actions allowed per fault.
Min Fault Triggers / Fault	Number	Controls the minimum number of fault triggers allowed per fault.
Access Level		Sets the access level of this item in the calibration tool.
Function	String	Sets the location where this item appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.

Supported Versions

Raptor 2013a_0.0.1 and newer

@@ Line 3: / Line 3: @@
 [[Raptor:Faults|Return to Faults page]]
-[[File:RaptorFaultManager.jpg|right|frame|Raptor Fault Manager]]
+[[File:RaptorFaultManager.jpg|right|frame|Raptor™ Fault Manager]]
 == Description ==