Raptor:DM20: Difference between revisions
Jump to navigation
Jump to search
Ssienkowski (talk | contribs) (Created page with 'Return to the main Raptor page Return to DM Messages page right|frame|Raptor DM20 == Description == <p>This…') |
No edit summary |
||
| Line 3: | Line 3: | ||
[[Raptor:J1939 DM Messages|Return to DM Messages page]] | [[Raptor:J1939 DM Messages|Return to DM Messages page]] | ||
[[File:RaptorDM20.jpg|right|frame| | [[File:RaptorDM20.jpg|right|frame|Raptor™ DM20]] | ||
== Description == | == Description == | ||
Revision as of 15:33, 4 March 2014
Return to the main Raptor page
Description
This block implements PGN 49664 Monitor Performance Ratio (DM20).
Inputs
| Input | Type | Description |
|---|
Outputs
| Output | Type | Description |
|---|---|---|
| ignition count | uint16 | The ignition cycle counter is defined as a single counter that defines the number of ignition cycles. Requirements for incrementing the denominator are specified in the appropriate legislative documents. |
| obd encounters | uint16 | OBD Monitoring Conditions Encountered Counts displays the number of times that the vehicle has been operated in the specified OBD monitoring conditions (e.g. CARB defines this as the general denominator). |
| SPNs[] | uint32[] | SPN of the system monitor for which Monitor ratio is being reported. |
| numerators[] | uint16[] | The number of times a vehicle has been operated such that all conditions necessary for the Applicable System Monitor to detect a malfunction have been encountered (e.g. CARB numerator requirements). |
| denominators[] | uint16[] | The number of times a vehicle has been operated that constitutes a driving cycle where this Applicable System Monitor could be operated per regulatory requirements (e.g. CARB denominator requirements). |
Parameters
| Parameter | Type | Description |
|---|---|---|
| J1939 Bus Name | String | This is the name of the J1939 bus. |
Supported Versions
- Raptor 2013a_0.0.1 and newer