Raptor:Fault Definition: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 63: | Line 63: | ||
| Sets the location where the X/Y limit appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model. | | Sets the location where the X/Y limit appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model. | ||
|} | |} | ||
Revision as of 13:50, 7 July 2014
Return to the main Raptor page
Description
This block defines a fault and set its status. The Raptor Fault Manager block must exist in the model to use this block.
Inputs
Input | Type | Description |
---|
Outputs
Output | Type | Description |
---|
Parameters
Parameter | Type | Description |
---|---|---|
Fault Name | String | Defines the name of the fault. Must be a valid C identifier. |
Persistent | Defines if the fault is persistent (state is remembered through a power cycle). | |
Sticky | Defines if the fault is sticky (must be cleared to stop being active). | |
X Count | Number | Input status must be true for this many count out of the last Y to set the fault as Active. |
Y Count | Number | Number of executions to track input status over. |
Calibratable X/Y Count | Allows the X and Y count limits to be changed in the calibtation tool. | |
Access Level | Sets the access level of X/Y limits in the calibration tool. | |
Function | String | Sets the location where the X/Y limit appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model. |