Raptor:PGN Set Enable: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 47: | Line 47: | ||
| Select to set the master enable state. | | Select to set the master enable state. | ||
|} | |} | ||
Revision as of 13:28, 7 July 2014
Return to the main Raptor page
Return to Transport Protocol page
Description
This block is used to set the enable status of a PGN. This can be used to disable a PGN from transmitting. This will also disable the request trigger and send the appropriate NACK when the PGN is requested. The Master Enable can be used to disable all communication while maintaining individual PGN enable/disable states when re-enabled.
Inputs
| Input | Type | Description |
|---|---|---|
| Enable | boolean | Input to enable or disable the PGN. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| J1939 Bus Name | String | This is the name of the J1939 bus. |
| PGN | uint32 | The PGN to receive. |
| Master Enable | checkbox | Select to set the master enable state. |