Raptor:Set Fault State: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
[[ | [[Raptor-Platform|Return to the main Raptor page]] | ||
[[Raptor:Faults|Return to Faults page]] | [[Raptor:Faults|Return to Faults page]] | ||
Revision as of 17:15, 16 December 2016
Return to the main Raptor page
Description
This block allows the individual states of faults to be set or cleared.
Inputs
| Input | Type | Description |
|---|---|---|
| Inhibit | boolean | Inhibits the block from changing the state of the fault (must be enabled in parameters). |
| Fault | The fault index of the fault to get the status of (only available in certain modes). | |
| State | boolean | The new value of the state being set. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Fault Source | Selects source of fault to get the status of. | |
| Fault Name | String | This is the name of the fault to get the status of (only available in certain modes). |
| State | The fault state to change. | |
| Show Inhibit Port | Enables the inhibit input port. |