Displays

This Page is currently under construction.

MotoHawk's MiniView

This rugged display unit is capable of operating in harsh marine and off-highway applications. Designed to operate with the MotoHawk® line of rugged controllers, the circular display (65 pixels high, 65 pixels wide, 4 built-in fonts, adjustable backlight) is controlled from the customer application via the MiniView CAN interface, typically using the MotoHawk® block set.

Features include:

• Low operating temperature (-40 degrees)
• CANbus data link
• Comes with SmartCraft connector
• IP-X7 Marine Protection Rating
• Rugged Case

Application Note

MiniView comes with a fixed CAN baud rate of 250kbps (not configurable via the MotoHawk block set). The CAN ID’s are also not configurable.

Data Sheet

Download the MiniView data sheet

Kongsberg Embedded Displays

CANtrak 2600

The CANtrak 2600 is an intelligent, multi-function display. It monitors numerous CAN based messages and displays the current status of user defined parameters. With its J1939 or custom CAN capability, the CANtrak offers easy integration into a CAN-based control system of MotoHawk® or 3rd party electronics for virtually any type of on-road or off-road vehicle.

Features include:

• 3.8" Graphical high resolution LCD Display, Rugged ABS Case
• IP67 Protection Rating
• Low operating temperature: -25C
• RS232, J1708/J1587 and CANbus datalink compatible
• Front and rear mountable, CE Approved design

CANtrak 2610

Similar to the CANtrak 2600, CANtrak 2610 is an intelligent, multi-function display, offering easy integration into a CAN-based control system of MotoHawk®.

Features include:

• 3.8" Graphical high resolution LCD Display, Rugged ABS Case
• IP67 Protection Rating
• Low operating temperature: -40C
• RS232, J1708/J1587 and CANbus datalink compatible
• Front and rear mountable, CE Approved design

CANtrak 2600 and 2610 Datasheets

CANtrak 2610 CSA Certified

Features include:

• Class I, Division 2, Groups A, B, C, D
• 3.8" Graphical high resolution LCD Display, Rugged ABS Case
• IP67 Protection Rating
• Low operating temperature: -40C
• RS232, J1708/J1587 and CANbus datalink compatible
• Front and rear mountable, CE Approved design

CANtrak 1800 Display

Compact, multifunction, industrial vehicle display. 74 x 74 mm overall size with 2.3" screen and connects directly to J1929 CANbus to display wide range of engine and vehicle parameters. Includes warning light to notify user of an active alarm and screen layouts configured using illuminated soft keys. Wide range of operating temperature ranging from -30 to 75°C. Launch date Q3 2010.

CANvu 350

Canvu 350 has supplemented the CANvu CAN bus display range with a new fully sunlight viewable 3.5" color display. It is the next generation of compact, highly flexible, rugged CAN bus displays.

CANvu 350 Features:

• Color Display
• J1939 parameters supported
• Multi, Quad and Uni Screens are user configurable
• Screens can be "locked" to prevent changes
• Optional Service Interval Timer Alarm
• Supports and Displays TIER 4 engine information

CANvu 350 Datasheets

Click Here for CANtrak Connecting and Programming Help and General CANtrak Questions

Click Here to see other Kongsberg Products

CANtrak Connector Kits

CANtrak Deutsch Connector Kit

CANtrak Deutsch Connector Mating Half Kit for use with both 2600 & 2610 Displays

CANtrak Connector Mating Kit

Deutsch Connector Mating Half Kit - both connectors.

[ More Connector Kits]

CANtrak Harnesses

CANtrak Configurable Input Harness

CANtrak Configurable Input Module Harnesses - Development Cable Set

CANtrak Display Power Harness

This pre-assembled power harness for CANtrak consists of a mating connector to plug into the display and 1.5m long flying leads for connection to the vehicle or equipment.

Alternatively, a connector kit is available for customers wishing to manufacture their own wiring harnesses.

[ More Harnesses]

Other Accessories

CANtrak GEM Software

The Generic Engine Monitor (GEM) is a powerful and extremely versatile software that allows the user to connect the CANtrak 2600 Display directly to the J1939/J1587 network on their vehicle or equipment. It displays comprehensive information on engine and transmission data and activates and stores alarms (where supported).

Features include:

• Plug and go solution for the display of J1939 and J1587 transmitted engine and transmission data
• Compatible with most diesel engines
• Adjustable contrast and backlight
• ISO and SAE standard icons are used for the parameters
• Menu and text based alarm systems are in multiple languages
• Flexible display options: multi-window screens, with analogue gauge, digital text or graphics

Click Here to see GEM CANtrak Datasheets and Manuals

CANtrak Module Starter Kit

Starter Kits combines all of the hardware and software necessary for the programmer to start developing applications for use with the CANtrak 2600/2610:

• module
• software
• tutorial
• harnesses
• PSU

CANtrak Mounting Kit

For a standard front mount. This kits consists of a set of nylon studs and thumb nuts.

CANtrak Behind-Dash Mounting Bracket Kit

Used to mount CANtrak Models 2600 and 26199 from the rear of a panel with a suitable cut-out. Only need to fix four studs to the rear of the panel.

CANtrak Configurable Module Tool

The CCDM (CANtrak Configurable Display Module) allows the user to quickly display 29 bit or 11 bit data from the CAN bus on a variety of gauge styles on a CANtrak 2600 or CANtrak 2610 without the need for programming in software languages such as C or C++. A non-software programmer can easily and quickly produce multiple screens of various styles of gauges without having to write even one line of code.

Features include:

• Display up to 40 Gauges
• User settable Internal Alarms per Parameter
• External DM1 Alarms
• Choice of languages
• Selectable Baud rate
• CANbus 29 bit or 11 bit mode
• Customizable PGN request
• Customizable buttons and start up logo/screen

(Software Tool Supplied on CD ROM )