Raptor:Table Axis: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
 
No edit summary
Line 14: Line 14:
! scope="col" style="width: 15%;"|Type
! scope="col" style="width: 15%;"|Type
! scope="col" style="width: 70%;"|Description
! scope="col" style="width: 70%;"|Description
|-
! [datatype]
|
| Input signal to the table axis, data type should be the same as the axis data.
|}
|}


Line 22: Line 26:
! scope="col" style="width: 15%;"|Type
! scope="col" style="width: 15%;"|Type
! scope="col" style="width: 70%;"|Description
! scope="col" style="width: 70%;"|Description
|-
! index
|
| Fractional index to use with an interpolation table.
|}
|}



Revision as of 14:21, 1 September 2016

Return to the main Raptor page

Return to Table Lookup page

Raptor™ Table Axis

Description

The Raptor Table Axis is similar to the Matlab Prelookup block. This block calculates the fractional index of the input value into the breakpoint data. Use this block to calculate the index inputs for the Raptor Interpolate 1d and Raptor Interpolate 2d blocks.

Inputs

Input Type Description
[datatype] Input signal to the table axis, data type should be the same as the axis data.

Outputs

Output Type Description
index Fractional index to use with an interpolation table.

Parameters

Parameter Type Description
Name String This is the name used to store the axis data. It is also used to identify the axis in the calibration tool.
Initial Value Vector This is the initial breakpoint data.
Data Type Specifies the data type of the breakpoint data and input port.
Storage Specifies the storage class of the breakpoint data.
Visible in Cal Tool Controls the visibility of the breakpoint data in the calibration tool.
Gain Number This controls the scaling used to display the data in the cal tool.

display value = (Gain * actual value) + Offset

Offset Number This controls the scaling used to display the data in the cal tool.

display value = (Gain * actual value) + Offset

Max Number Sets the maximum value that can be set to any breakpoint data point in the calibration tool.
Min Number Sets the minimum value that can be set to any breakpoint data point in the calibration tool.
Format Format String Sets the display format to use in the calibration tool.
Unit Text String Sets the unit text that is displayed in the calibration tool.
Help Text String Sets the help text that is displayed in the calibration tool.
Access Level Sets the access level of this item in the calibration tool.
Function String Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.

Supported Versions