Bench Tools: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:


:'''[http://store.neweagle.net/CategoryProductList.jsp?cat=MotoHawk+Control+Solutions%3AAccessories%3ADevelopment+Tools:Harness+Installation+and+Removal+Tools Click Here to Purchase Harness Installation and Removal Tools]'''
:'''[http://store.neweagle.net/CategoryProductList.jsp?cat=MotoHawk+Control+Solutions%3AAccessories%3ADevelopment+Tools:Harness+Installation+and+Removal+Tools Click Here to Purchase Harness Installation and Removal Tools]'''
==MotoHawk Control Solutions==
[[MotoHawk Control Solutions]]

Revision as of 19:25, 9 August 2010

Breakout Box Assembly

Performing ECM signal measurement and failure testing without modifying the harness can be difficult and time consuming. ECM breakout boxes are rugged harness inserts designed to make this painful job easy. Breakout boxes were designed by application developers to assist troubleshooting and failure mode testing activities and are a highly recommended part of every developer's toolkit. The family of breakout boxes covers the entire range of Woodward's MotoHawk Control Solutions modules. The breakout box plugs into the existing harness connectors and ECM, but also provides an extension with measurement points and circuit breaking bars. Each pin to the ECM can be probed, open circuited, or connected to any other signal. Each breakout box assembly comes with an Expander toolkit of patch cables, shorting bars, and banana jacks.

Click Here to Purchase Breakout Box Assembly

Harness Installation and Removal Tools

Harness Installation and Removal Tools include tools are designed to strip, cut, crimp, and remove wire.

Click Here to Purchase Harness Installation and Removal Tools

MotoHawk Control Solutions

MotoHawk Control Solutions