Electronic Foot Pedal: Difference between revisions
(Created page with '<span style="color:#8B0000">'''Voltage Supply'''</span> For proper use the pedals should be supplied with a 5V power supply. When the voltage is above the 15V the pedals can bec…') |
No edit summary |
||
| Line 1: | Line 1: | ||
New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power from 2 independent power supplies and output voltages between 0 & 5 V and 0 & 2.5 V. We also sell a connector kit for developing a harness that fits your needs. We have both firewall and floor mounted models. | |||
<span style="color:#8B0000">'''Voltage Supply'''</span> | <span style="color:#8B0000">'''Voltage Supply'''</span> | ||
Revision as of 15:13, 10 March 2015
New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power from 2 independent power supplies and output voltages between 0 & 5 V and 0 & 2.5 V. We also sell a connector kit for developing a harness that fits your needs. We have both firewall and floor mounted models.
Voltage Supply
For proper use the pedals should be supplied with a 5V power supply. When the voltage is above the 15V the pedals can become permantly damaged.
When using these pedals with a MotoHawk module use the 5V XDRP sensor supply output to provide power to the foot pedal. Also, use the XDRDG sensor ground to ground the pedal. This is a clean ground that helps provide a more accurate reading.