Revision as of 17:18, 6 April 2015

The blocks in this subsystem are define and configure application triggers.

Blocks

Block	Description	Appearance
App Trigger	This block triggers a subsystem upon activation of an application event.	App Trigger block
Raptor dT	This block outputs the delta time since the last time it was executed.	Raptor dT block
Shut-down	Triggers a write of all non-volatile data to EEPROM within the ECU.	Shut-down block
Time	This block outputs the time since the model began execution.	Time block
Timed Trigger	This block is used to trigger periodic functions in the program. The function call output is triggered at the rate specified in by the parameter. Raptor timed triggers support stepping with the application monitor to aid in debugging.	Timed Trigger block
Timed Trigger Configuration	This block allows certain base timed trigger periods to be modified. This block is target dependant. Place this block in a model with a target definition block and then enter the block's help again for more specific help.	Timed Trigger Configuration block

@@ Line 20: / Line 20: @@
 | <p>This block outputs the delta time since the last time it was executed.</p>
 | [[file:RaptorDT.jpg|frameless|border|Raptor dT block|center]]
+|-
+! <h5>[[Raptor:Shut-down|Shut-down]]</h5>
+| <p>Triggers a write of all non-volatile data to EEPROM within the ECU.</p>
+| [[file:RaptorShutdown.JPG|frameless|border|Shut-down block|center]]
 |-
 ! <h5>[[Raptor:Time|Time]]</h5>
@@ Line 33: / Line 37: @@
 | [[file:RaptorTimedTriggerConfiguration.jpg|frameless|border|Timed Trigger Configuration block|center]]
 |-
-! <h5>[[Raptor:Shut-down|Shut-down]]</h5>
-| <p>Triggers a write of all non-volatile data to EEPROM within the ECU.</p>
-| [[file:RaptorShutdown.JPG|frameless|border|Shut-down block|center]]
 |}