Kvaser

Kvaser develops interfaces and data loggers for any flavor of CAN and CAN related buses to meet customer system requirements. The Kvaser USB to CAN devices are the approved products of MotoHawk. Kvaser tools are easy to use, accurate and state-of-the-art. Rigorous quality assurance and control processes for both hardware and software ensures that Kvaser delivers a user-friendly and up-to-date tool. Also using Kvaser products is recommended to be used with MotoHawk applications because it is all compatible and other tools may not be compatible. Kvaser products are also very cost effective.

Hardware

Kvasers hardware interfaces can be used throughout the product cycle, for development,simulation, test, and other maintenance of CAN networks and related. All Kvaser Hardware is designed to perform at their optimum in industrial or automotive temperature ranges, while some are specifically ruggedised to endure the most hostile of environments.

Understanding the Kvaser Part Numbers

• Leaf = Single Channel
• USB CAN = Dual Channel
• Rugged = Galvanic, IP67 Packaging
• HS = High Speed ( 1MB ), but does not reflect the message rate capability, typically between 8K - 20K messages / second.

Kvaser Products	Picture	Kvaser Products	Visit our Webstore	Product Description	Aluminum	Plastic	Single	Dual	Galvanic	Max Msg Rate (msg/ sec)	IP67
Kvaser Leaf Light v2		685-0	Leaf Light V2	The Kvaser Leaf Light v2 represents one of the easiest and cheapest ways of connecting a computer to a CAN bus network. Galvanic isolation as a standard, its USB 2.0 compliant connector and 9-pin D-SUB connector, the Leaf Light v2's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications.		X	X		Yes	8K
Kvaser USBcan II HS/HS		159-6	Kvaser 159-6	The Kvaser USBcan II provides a dual channel CAN bus interface with a standard USB interface. One CAN channel is for High-Speed CAN. The second optional CAN channel can be ordered for High-Speed, Low-Speed as well as Single-Wire CAN.		X		X	NO	Up to 6k Tx,12K Rx
Kvaser Leaf Light HS		241-8	Discontinued Please Contact Sales	The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost. Kvaser Leaf Light is a reliable low cost product. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds. The low current consumption, 70 mA, reduces the power drain from your laptop.		X	X		NO	8K
Kvaser Leaf Professional HS		243-2	Kvaser 243-2	Kvaser Leaf Professional with MagiSync™ is a one channel USB interface for CAN and LIN. It offers the possibility to easily connect several interfaces to a PC. The time-stamping is synchronized through Kvaser MagiSync™. Providing flexibility and making it perfect for multi-channel applications. High-Speed, Low-Speed and Single-Wire CAN and LIN are supported through different product versions.		X	X		Yes	Up to 20K
Kvaser Memorator Professional HS/HS		351-4	Kvaser 351-4	Kvaser Memorator makes it possible for you to log data from a CAN bus to a standard SD or MMC disk. Kvaser Memorator provides a dual channel CAN bus interface with a standard USB interface and is delivered with a SD disk.  Support for High-Speed, Low-Speed and Single-Wire CAN through different product versions.		X		X	Yes	Up to 20K
Kvaser USBcan Professional HS		357-6	Kvaser 357-6	Kvaser USBcan Professional with MagiSync™ is a two channel USB interface for the CAN bus. It offers the possibility to easily connect several interfaces to a PC.		X		X	Yes	Up to 20K each channel
Kvaser Leaf Light GI		411-5	Discontinued Please Contact Sales	Kvaser Leaf Light is a one channel USB interface for CAN. It offers the possibility to easily connect several interfaces to a standard PC.		X	X		Yes	Up to 8K
Kvaser Leaf Light Rugged		427-6	Kvaser 427-6	Kvaser Leaf Light Rugged is a one channel USB interface for CAN. In hostile environments where dust and water are the norm, the IP67 rated housing assures reliable protection.	X		X		Yes	Up to 8K	X
Kvaser BlackBird		441-2	Kvaser 441-2	Kvaser BlackBird SemiPro is a high performance wireless communication link to the CAN bus utilizing WLAN technology, which offers increased mobility and extended range of coverage for CAN bus networks. Has public/ private option of wireless communications.	X		X		Yes	Up to 15K	X
Kvaser Memorator R SemiPro		490-0	Kvaser 490-0	Kvaser Memorator R SemiPro is a small, yet advanced portable CAN data logger. The device can be configured in many different ways to achieve the most suitable and effective logging for any occasion. Connecting the logger to a PC provides direct access for configuring baud rates, trigger conditions and filters using the standalone Kvaser Memorator Tools. To get a rugged design the SD-disk is located inside the unit and soldered to the PCB to make sure it works error free even when exposed to vibration and shocks.	X		X		Yes	Up to 20K	X
Kvaser Eagle		567-9	Kvaser 567-9	Kvaser Eagle is a flexible and powerful dual channel CAN to standard USB high-speed data logger that is capable of running user-developed scripts to suit a wide selection of CAN bus applications. It logs data from the CAN bus to a standard SD flash disk and supports high-speed CAN.		X		X	Yes	Up to 20K	X
Kvaser USBcan R		579-2	Kvaser 579-2	The Kvaser USBcan R is robust, easy to carry device designed for high-end applications. With quick reaction times and high data throughput, the Kvaser USBcan R is perfect for rapid ECU re-flashing, advanced bus analyzers and efficient development work.				X	Yes	Up to 15K	X
Kvaser Leaf Light With J1939-13 Connector		642-3	REPLACEMENT is KVASER 787-1	The Kvaser Leaf Light supports full speed USB interface for CAN with high performance at a low cost. Kvaser Leaf Light is a reliable low cost product. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds. The Leaf Light J1939 is our standard Leaf Light HS, but with a J1939-13 connector included for easy connection to the J1939 bus.		X	X		No	8K	X
Kvaser Leaf Light HSv2 With J1939-13 Connector		787-1	Kvaser 787-1	The Leaf Light HS v2 J1939-13 provides a simple way of connecting a PC with the on-board computer of any J1939 compliant commercial vehicle for diagnostic purposes by means of its USB 2.0 connector and a 9-pin J1939-13 compliant CAN connector. Having made its name as the work-horse of USB to CAN interfaces, Kvaser's Leaf Light product series provide reliable, low cost tools for connecting any CAN network to a PC or mobile computer in marine applications and beyond.		X	X		Yes	8K	X
Kvaser CAN Datalogger Memorator Prof 5xHS		778-9	Kvaser 778-9	The 5 channel Memorator Professional is its ability to run user-developed scripts catering for engineers who need customised features such as CAN protocol converters, CAN gateways and advanced CAN logging functionality. • 5 CAN high speed channels with 9 pin DSUB connectors. • Compatible with J1939, CANopen, NMEA 2000 and DeviceNet. • Both a standalone datalogger and a USB-to-CAN interface. • CAN FD upgradeable via firmware.	X	X		Yes	8K	X
Kvaser USBcan Light 2xHS		714-7	KVASER 714-7	The Kvaser USBcan Light 2xHS offers two high speed CAN channels and one USB 2.0 compliant interface. With the three connectors at the end of fully galvanically isolated flexible wires, this device is designed to facilitate any application in which the CAN bus connectors aren't easily accessible, such as hard to reach electronic control units (ECU) on a vehicle. • One USB 2.0 compliant device provides easy access to two CAN busses. • Quick and easy plug-and-play installation. • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. • 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib. • High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s. • Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.		X	X	Yes	8k

USB Compatibility

The Kvaser USB to CAN cables are compatible with USB 3.0 ports, but not with USB/ eSATA ports.

Kvaser Blackbird

Kvaser BlackBird SemiPro is a high performance wireless communication link to the CAN bus utilizing WLAN technology, which offers increased mobility and extended range of coverage for CAN bus networks.

Major features

• WLAN version 802.11b/g
• Encryption: WPA2/WPA/WEP128/WEP64
• Accessibility: Public/Private
• Provides the functionality of a WLAN and a USB to CAN bus interface in a single device
• Designed for USB 2.0, backward compliant with USB 1.1
• IP67 rated lightweight aluminium housing
• Messages are time-stamped and synchronized with a precision of 25 microsecond
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
• Supports silent mode for analyzing tools.
• Polyurethane cabling for extreme environments.
• Galvanic isolation of the CAN bus driver stage to protect the hardware.
• 100% software compatible with applications written for all Kvaser hardware with Kvaser CANlib SDK
• Equipped with a 50 cm (19.7 in.) long CAN cable.
• Interfaces the CAN bus with a D-SUB connector.
• Quick and easy Plug-and-Play installation.
• Operating voltage CAN bus (7 - 40 V DC)

Kvaser Memorator Professional

Kvaser Memorator Professional provides the functionality of a standalone CAN bus data logger and a USB CAN bus interface in a single device. When combined with the Kvaser Linx, the Kvaser Memorator Professional also supports bus types like J1587.

As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. A great advantage is that all configurations are made with a user-friendly configuration program and are stored on the flash disk. It makes it both easy and convenient to set configurations with the PC and download it to Kvaser Memorator Professional for use in the field. The Kvaser Memorator Professional also has a USB connection and can be used as a powerful USB CAN bus interface just like Kvaser's USBCAN or Leaf products.

Functions in Kvaser Memorator Professional

Triggers and Data Logger capabilities

• Kvaser Memorator can log continuously, or logging can be triggered by creating advanced triggers based on messages, data signal values, error messages, external trigger's falling or rising edge, and I/O signals.
• Pre- and post-triggers are available without buffer size restrictions, limited by disk space only.
• Handles up to 20 000 msgs/s in standalone logger mode.
• Transmit messages to the bus network.
• External digital output that can drive a LED or a buzzer.
• < 250 ms boot up time.
• Supports Silent Mode - log bus traffic safely without interfering and "listen-only" mode for bus analysis tools.

Filters

• Kvaser Memorator Professional can filter out selectable messages and/or signals to be logged. The identifiers can be picked from a database, or all messages can be logged.
• Support for pass as well as stop filters.
• Create a counting pass filter to have a message logged at enumerated occurrence.

Memory cards and functions

• Standard MMC or SD type flash memory cards can be used - up to 2GB.
• Support for 16GB SDHC cards. Larger SDHC cards supported in the future - up to 32GB.
• Set up several devices in a daisy chain for larger logging capacity.
• Transfer recorded data over the USB interface at 1.4 MB/s or an SD card reader at 15 MB/s.

Configuration software in the PC

• Easy to use graphic configuration tool - Kvaser Memorator Professional Setup Tool.
• Configuration of the CAN controller, i.e. bit rate and filters.
• Configuration of the trigger conditions.
• Configuration of filter for messages to be stored.
• Configuration upload and download via USB.
• Using the included Kvaser Dispatcher software, a complete measurement setup can be turned into a self-installing package that is sent to a remote location to carry out a specific logging task.

Major features of Kvaser Memorator

• One device for desktop and laptop.
• Functionality of a standalone CAN bus data logger and a USB CAN bus interface in a single device.
• Support for Kvaser Linx J1587.
• Driver support for major operating systems.
• Quick and easy plug-and-play installation.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
• CAN messages are time-stamped with 2 microseconds resolution.
• Large on-board RAM buffer for CAN messages.
• 100% compatible with applications written for Kvaser Leaf, LAPcan, PCIcan, PCcan, USBcan, etc., with Kvaser's CANlib.
• Two CAN connections ISO-11898-2 high-speed, 10 kbit/s up to 1 Mbit/s.
• Galvanic isolation to protect the hardware.
• 130mA current consumption.
• Operating temperature range from -40 to + 85 deg C
• Power from CAN bus or from the USB side.
• Built-in real time (calendar) clock with battery backup.
• Logger status is indicated with five externally visible LEDs.
• Plastic housing with dimension W*L*H about 50*90*25 mm (circa 2 x 3,5 x 1 inch)

Kvaser Memorator Professional (KMP) versus Kvaser Memorator (KM)

1. KMP has battery backup in case of power loss. KM doesn’t have battery backup. This is the best reason to sell the KMP. Most customers want to know why there was a power loss and KMP will have data to support the power loss. KM usually loses this data.
2. KMP has a shorter boot up time of 250ms. KM has a boot up time of 3000ms.
3. KMP can use SD and SDHC cards up to 32 GB capacity. KM can only use SD cards up to 2GB.
4. All new development will be on KMP. KM will remain unchanged.
5. KMP has galvanic isolation (GI). KM doesn’t have GI.
6. KMP is USB 2.0 and KM is only USB 1.1.

Kvaser Memorator Professional Downloads

Setup Tool Example

place user manual here

Kvaser 331-6

Kvaser PCIcanx is a CAN interface for the PCI-X as well as PCI bus.

The Kvaser PCIcanx boards fits in both PCI-X and PCI bus systems. Galvanically isolated CAN bus drivers to protect the hardware.

Webstore: Kvaser 331-6

Kvaser PC104

Compact and self-stacking, the Kvaser PC104+ board complies with the flexible PC/104-Plus specification. Allowing embedded system designers to substantially reduce development costs and time. The Kvaser PC104+ board represents a dual channel CAN interface, with a high performance microcontroller onboard.

Kvaser Linx J1587

• New Eagle Part # Kvaser 389-7

• Attach the Kvaser Linx to your Kvaser CAN interface's and access the J1587 bus network. The Kvaser Linx is interchangeable and designed for maximum flexibility and maintainability.

Webstore: Kvaser Linx

Kvaser Datasheets

Kvaser Datasheets

Harnesses

New Eagle sells harnesses to convert the DB9 connectors used by Kvaser to SmartCraft connectors. Currently, we have harnesses for application with the Leaf and USBCAN devices; we are in the process of developing a harness that includes the necessary power wires for the operation of the Memorator Professional in its stand-alone data logging mode.

More Information:

More Information: Harnesses

Webstore

Webstore: Harnesses

Kvaser Software

Kvaser offers 3rd party software for analysis, simulation, calibration, debugging, and more. Developers can download software and start developing around any Kvaser interface right away.

CANKing

CANKing is a CAN bus monitor and general-purpose diagnostic tool. It is especially suited for interactive development work. CAN messages can be easily sent and the corresponding impact on the target module observed. To use CANKing it is necessary to purchase one of our CAN interfaces such as the Kvaser Leaf USB to CAN converters. It is a free software that comes with the Kvaser product. This product allows the user to see all CAN messages on the bus in either either decimal or hexadecimal forms. It also allows the user to send out simple test messages.