Raptor:Modbus Slave Error: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
== Error Codes == | == Error Codes == | ||
{ | {| class="wikitable" style="width:75%;" | ||
| class="wikitable" style="width:75%;" | |||
|- | |- | ||
! scope="col" style="width: 25%;"|CODE | ! scope="col" style="width: 25%;"|CODE | ||
| Line 42: | Line 41: | ||
|GATEWAY TARGET DEVICE FAILED TO RESPOND | |GATEWAY TARGET DEVICE FAILED TO RESPOND | ||
|- | |- | ||
} | |} | ||
== Inputs == | == Inputs == | ||
Latest revision as of 18:04, 28 November 2016
Return to the main Raptor page
Description
This block will send a MODBUS Error Response. See the table below for the supported codes and their meaning.
Error Codes
| CODE | NAME |
|---|---|
| 0x01 | ILLEGAL FUNCTION |
| 0x02 | ILLEGAL DATA ADDRESS |
| 0x03 | ILLEGAL DATA VALUE |
| 0x04 | SLAVE DEVICE FAILURE |
| 0x05 | ACKNOWLEDGE |
| 0x06 | SLAVE DEVICE BUSY |
| 0x08 | MEMORY PARITY ERROR |
| 0x0A | GATEWAY PATH UNAVAILABLE |
| 0x0B | GATEWAY TARGET DEVICE FAILED TO RESPOND |
Inputs
| Input | Type | Description |
|---|---|---|
| Command | uint8 | The command from the request, that is being responded to. |
| Error Code | uint8 | The error code. |