Raptor-Training

New Eagle > Products Wiki > Raptor Platform > Raptor Training

noframe Raptor Training, created by our team of experienced controls engineers, provides hands-on experience which enables the new practitioner to gain familiarity with the tool chain by building, deploying, calibrating, and refining a real world control application. Buy Now Product Part Number Webstore Raptor Training - 3-day @ New Eagle RAP-TRAINING-01 Buy Now Raptor Training - Onsite Training RAP-TRAINING-02 Buy Now Raptor Training - Video Series w/ Training Kit Coming Soon Coming Soon Training Curriculum The Raptor Training course is designed to give an understanding of the Raptor Platform in an efficient, hands-on manner. We will start off in the MATLAB/Simulink environment, showing concepts of Raptor-Dev's integration and how to use model based design to your advantage. Once the project is built we will flash the compiled code to the module. Using Raptor-Cal, New Eagle's calibration tool, we will calibrate and test the system. The topics covered in Raptor Training are listed below. Getting Started Software Installation Licensing MATLAB/Simulink Introduction MATLAB Console / Workspace Simulink Block Descriptions Raptor-Dev Project Directory Setup Target Definition Block Trigger Blocks Measurement & Adjustment Blocks I/O Blocks Fault Management Blocks Data Storage Blocks CAN Blocks Raptor-Cal Flashing a Module Online Displays Calibrations Raptor Hardware Hardware Description Kit Setup & Testing Training Prerequisites The following steps should be completed before the Raptor Training course! Special topics For on-site training: if you would like Raptor Training to cover any specific topics, please contact us at least 2 weeks prior to training so we can include additional information and examples. Software Requirements Follow the instructions below for necessary software installations. More details can be found in the Raptor Getting Started Guide. Operating System Windows 7 or later is required. MATLAB and Simulink Please Note: MATLAB and Simulink is used throughout training and having a basic understanding of these tools is a necessary requirement for training. To learn more about MATLAB and Simulink: Simulink Training Raptor Training Video No. 3: MATLAB and Simulink Intro MATLAB 2015a or later is recommended. The following tools from MathWorks are required: MATLAB Simulink Embedded Coder MATLAB Coder Simulink Coder If you don't have all these MathWorks products, we can help procure a temporary MathWorks trial license for you during your training classes. If you would like one, please follow these instructions: Contact us at least 1 week prior to training indicating you would like a MathWorks trial license for training We will assign a trial license to you, and you will receive an email when it is available for download Click the link in the email to download the trial (if you don't have a MathWorks account, set one up at this time) Proceed through the installation Raptor-Dev and Raptor-Cal Raptor-Dev and Raptor-Cal can be downloaded from software.neweagle.net. If necessary, first create an account and wait for the confirmation email (requests may take up to 2 business days to fulfill). Ensure compatibility between Raptor-Dev and MATLAB using the matrix below. After installation of Raptor-Dev, the Raptor Configuration Editor will open (alternatively, open it by navigating to Start > Programs > New Eagle > Raptor Configuration Editor). Use this tool to assign Raptor-Dev to the version of MATLAB used for training. Once Raptor-Dev and Raptor-Cal are installed, navigate to the New Eagle License Viewer (Start > Programs > New Eagle > New Eagle License Viewer). If necessary, request a trial license by following the instructions below. Select the settings button Click 'New License' Fill out the information, and click submit (requests may take up to 2 business days to fulfill) Once request is fulfilled, an email will be sent with update instructions (click Update License Online) Hardware Compiler The appropriate compiler and associated license will be required. The BCM48, CM0711, CM3626, and CM2115 use the CodeWarrior for MPC55xx/MPC56xx Microcontrollers V2.10 compiler. You can download an evaluation version or purchase the compiler here. The CM3620 uses the IAR Embedded Workbench for ARM 4.42A compiler. To coordinate obtaining an evaluation version of the compiler please contact New Eagle Support. The GCM196 and ECM196 use the Hightec Compiler for the Infineon TriCore architecture v3.4.5.11 compiler. For more information on the GCM196 compiler, and to ensure you get the correct version please contact New Eagle Support. Kvaser CANKing Kvaser CANKing is a free, basic CAN bus monitor. To download, go to the Kvaser downloads page at http://www.kvaser.com/support/downloads/. Click on the link to download Kvaser CANKing, and proceed through the installation. Training Downloads This section is for all documentation you may need for Raptor Training. Software Downloads Training Kit Software Training Kit Block Diagram Raptor-Cal User Manual Training Evaluation Form All the latest Raptor software for training can by accessing: software.neweagle.net Training Videos Below are all of Raptor Training Videos for this course. Each video builds off of one another, so please follow them in chronological order. For optimal viewing experience view the videos in 1080p, but if need be you can reduce the quality to 720p. Anything lower is not recommended. Please note: The video can be fast paced at time, be prepared to pause and work on small parts of the video at a time if need be. An internet connection is required. Estimated internet usage: 5 GBs+ Number Video Topic Video Link 1 Overview Click Here 2 Getting Started Click Here 3 MATLAB and Simulink Intro Click Here 4 Raptor Library Click Here 5 Creating a Raptor Project Click Here 6 Raptor Trigger Blocks Click Here 7 Raptor Adjustments, Measurements and Overrides Click Here 8 First Build Click Here 9 Training Kit Set Up Click Here 10 Raptor-Cal Introduction Click Here 11 Potentiometer Characterization Click Here 12 Actuator Control Click Here 13 Fault Management Click Here 14 ETC Control System Click Here 15 Data Storage Introduction Click Here 16 Data Storage Project Click Here 17 Raptor Training Wrap Up Video Click Here Video Copy Rights: "Inspired", "Life of Riley", "Poofy Reel", "Pure Attitude" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ © New Eagle 2016