RCM-58NN-112: Difference between revisions

Revision as of 00:40, 30 July 2021

RCM-58NN-112-2007

The RCM112-2007 is a Raptor general-purpose control module with 4 CANFD buses, 1 LIN Master/Slave, 1 2-Wire Ethernet, 4 SENT channel, and configurable discrete inputs and outputs including analog inputs, frequency inputs, a wake input, high and low-side driver outputs, and 4 Half-Bridges.

The RCM112-2007 is one of the Raptor™ rugged production controllers that use a software development process based upon MATLAB/Simulink and Raptor-Dev which significantly speeds up algorithm development by using automatic integration and code generation. In addition, developers can quickly test application software using simulation and automated testing. See the next page for more details.

Data Sheets

RCM-58NN-112-2007

Datasheet

Compilers

Three options will be available for the RCM112. For ASIL-C or D, use the Hitec PowerPC 4.9. For non-ASIL, use either the GCC ST58 or NXP S32 Free compilers. Contact Sales around compiler use and compatibility

Hitec for Power Architecture

Hitec for RCM112

S32 Design Studio for Power Architecture v2.1

Please reference the following Document to download and install the compiler from NXP's website. Note - this compiler has not been validated with the RCM112 builds

GCC For RCM112 Compiler Installation Guide

ST58 SPC5-Studio

ST58 GCC

Webstore

Coming Soon. To Inquire Contact Sales

Other Modules

Back to: Controllers

@@ Line 20: / Line 20: @@
 ====S32 Design Studio for Power Architecture v2.1====
-Please reference the following Document to download and install the compiler from NXP's website.
+Please reference the following Document to download and install the compiler from NXP's website.  Note - this compiler has not been validated with the RCM112 builds
 :'''[https://wiki.neweagle.net/ProductDocumentation/Raptor/Controllers/S32%20Design%20Studio%20for%20Power%20Architecture%20v2.1%20Compiler%20Install%20Guide.pdf GCC For RCM112 Compiler Installation Guide]'''