Raptor Telematics Downloads: Difference between revisions
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
==Troubleshooting== | ==Troubleshooting== | ||
''Please follow the steps below to troubleshoot the connection | ''Please follow the steps below to troubleshoot the connection.'' | ||
1. Verify that the IMEI on the back of the unit matches the portal configuration: | 1. Verify that the IMEI on the back of the unit matches the portal configuration: | ||
Revision as of 19:14, 27 January 2023
Downloads
Telematics Packages
Gold Telematics Package
- ASM-TCM-G01-USA & ASM-TCM-G01-GLOBAL
Platinum Telematics Package
- ASM-TCM-P01-USA & ASM-TCM-P01-GLOBAL
Troubleshooting
Please follow the steps below to troubleshoot the connection.
1. Verify that the IMEI on the back of the unit matches the portal configuration:
- The IMEI can be found on the back of the unit:
2. Make sure that the unit’s antenna is properly connected and mounted in an area where it has a view of the sky.
3. Assure that the unit is in an area where there is cellular coverage.
- The coverage map(s) can be found here.
4. Power up the unit, and check the LEDs.
- We’d like to see that the cellular (GPRS) connects and the GPS gets a fix. This would be the green LED flashing for 2 seconds ON and 2 seconds OFF. The green LED sometimes looks more yellow than green.
5.Monitor the CAN bus connection. If working correctly, the telematics unit should transmit the following message:
- 0x19F0FF4A