Cascadia Motion (Rinehart Motion): Difference between revisions
No edit summary |
|||
| Line 9: | Line 9: | ||
====Datasheets==== | ====Datasheets==== | ||
[http://www.neweagle.net/support/wiki/docs/Rinehart/PM100_Datasheet_10232009.pdf RMS Datasheet] | '''[http://www.neweagle.net/support/wiki/docs/Rinehart/PM100_Datasheet_10232009.pdf RMS Datasheet]''' | ||
== Electric Motors Supported by the RMS Traction Inverter == | == Electric Motors Supported by the RMS Traction Inverter == | ||
Revision as of 20:10, 19 May 2011
Product Summary
The PM100DX is an AC Traction Controller designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The Traction drive is fabricated using a patented high heat flux thermal design approach that dramatically reduces the size and weight of the finished drive, and improves its life in the automotive environment. With extensive experience in automotive and military vehicle traction and power electronics applications, RMS has achieved a major breakthrough in integrating Traction Control into a vehicle.
Datasheets
Electric Motors Supported by the RMS Traction Inverter
- Siemens/Ford Ranger Induction Motor
- Remy HVH250 PM Motor
- Siemens 1PV5135-4WS28
- Parker PM Motor
- Remy HVH250HT Motor (In Development)
- EVO AF-140-12 PM Motor
- MES Induction motor
- UQM-75 Motor
- Numerous Customer, Proprietary Installations
MotoHawk CAN Library for RMS PM100
MotoHawk CAN Library for RMS PM100
Supports version 1.0, Sept 30, 2009 CAN ICD. Request more information on the MotoHawk library at sales@neweagle.net. This library and the RMS PM family of inverters integrates well with the New Eagle EV Supervisory Control system, and furthermore makes a nice EV Powertrain combination with one of the supported motors.
Firmware Release Notes
Current version is 13-B1, 3 March, 2011 Click here to download the Firmware release notes and download the software tools.
Features:
- None
Bug Fixes:
- Fixed the issue where HW faults were not cleared by the “Clear Fault Command”, both through CAN and RMS GUI.
Version: 12E-1, 9 November, 2010
Features:
- Updated current regulators for improved performance
- Updated flux weakening regulator
Bug fixes:
No bugs found!
Version - 12D, 27 September, 2010
Features:
- Changed the SW Over-current limit to 550 Amps for HW versions 0, 2, 2340, and 2342.
- Added a current proportional gain schedule
- For SCI broadcast, used non-filtered values instead of filtered values for more accurate diagnostics.
- Added Id and Iq commands to CAN broadcast message 0x0AD.
- For motor type 1, updated following parameters:
- Leakage is set to 1.0 instead of 0.57735
- Kp Current is set to 1.0 instead of 2.0
- Mod Limit is set to 1.10 instead of 1.20
Bug fixes:
- Fixed the bug that was causing the speed resolution to be 2 rpm minimum.
- Corrected resolution on ‘Modulation’ parameter for CAN broadcast message.
Minor Release 12A,
Features: This is a minor release with the following updates:
- Added Delta Resolver Filtered to the broadcast message 0x0A5.
- Added a new broadcast message 0x0AD to send Modulation Index and Flux Weakening Output information.
- Added Inverter Enable State and Direction Command to byte 6 and 7 respectively, to the broadcast message 0x0AA.
RMS Traction Inverters in the News
EV Conversions
EV Powertrain for Light to Medium Duty Trucks
Electric Race Motorcycle
Green Car Congress
Debut of the RMS PM Family of Drives
http://www.greencarcongress.com/2006/10/rinehart_motion.html
Electric Drive for Siemens Ballard AC Induction Drive
Contact sales @(at) neweagle.net - http://www.diyelectriccar.com/forums/showthread.php/ford-ev-motors-siemens-ballard-26120.html
Evolve It Motors
http://evolveitmotors.com/solutions/