Raptor-VeeCAN-320-Family: Difference between revisions
| Line 23: | Line 23: | ||
:'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Raptor/Displays/DISP-VC320-1204_DataSheet.pdf VeeCAN 320 Datasheet]''' | :'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Raptor/Displays/DISP-VC320-1204_DataSheet.pdf VeeCAN 320 Datasheet]''' | ||
:'''[http://www.neweagle.net/support/wiki/ProductDocumentation/NonRaptorDisplays/VeeCAN320_3dCAD.zip VeeCAN 320 3-D CAD (.stp)]''' | :'''[http://www.neweagle.net/support/wiki/ProductDocumentation/NonRaptorDisplays/VeeCAN320_3dCAD.zip VeeCAN 320 3-D CAD (.stp)]''' | ||
:'''[https://wiki.neweagle.net/ProductDocumentation//Raptor/Displays/ | :'''[https://wiki.neweagle.net/ProductDocumentation//Raptor/Displays/Raptor-Dev_Display_User_Manual.pdf Programming Guide]''' | ||
:'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Raptor/Raptor-Dev/Raptor-Datalogger-Development.pdf Raptor Data Logger Guide]''' | :'''[http://www.neweagle.net/support/wiki/ProductDocumentation/Raptor/Raptor-Dev/Raptor-Datalogger-Development.pdf Raptor Data Logger Guide]''' | ||
Revision as of 21:50, 19 January 2024
Raptor VeeCAN 320
The Raptor VeeCAN 320 display uses the Raptor Development software tool to create a display interface for your application. New Eagle adapted the VeeCAN SDK to the Raptor platform. The Raptor VeeCAN platform allows model-based designers to engineer both the display logic and control logic for an HMI (Human Machine Interface).
The Raptor VeeCAN has a template starter project. It provides a base project with CAN logging, control logic and custom screens.
A Raptor VeeCAN user can receive messages on the CAN bus and read a VeeCAN's analog inputs (three modes: 0-2.5V, 0-10V, 0-500Ω). The VeeCAN supports logging to an attached USB memory stick.
Note: The file <usbstick_logoffload.autorun> must be on the USB memory stick to aid the VeeCAN in logging data. Download the file here: usbstick_logoffload.autorun.
Platform Benefits
- Model-based programming facilitates ease of use and rapid development of displays
- Read and log CAN messages
- Same great benefits of the VeeCAN 320
Downloads
Raptor VeeCAN 320 Lite
The Raptor VeeCAN 320 Lite display uses the Raptor Development software tool to create a display interface for your application. New Eagle adapted the VeeCAN SDK to the Raptor platform. The Raptor VeeCAN platform allows model-based designers to engineer both the display logic and control logic for an HMI (Human Machine Interface). The VeeCAN 320 Lite only has a single CAN channel (unlike the VeeCAN 320 which has two CAN channels and 13 pins of I/O) and is best suited for applications with CAN sensors.
The Raptor VeeCAN has a template starter project. It provides a base project with CAN logging, control logic and custom screens.
Note: The file <usbstick_logoffload.autorun> must be on the USB memory stick to aid the VeeCAN in logging data. Download the file here: usbstick_logoffload.autorun.
Platform Benefits
- Model-based programming facilitates ease of use and rapid development of displays
- Read and log CAN messages
- Same great benefits of the VeeCAN 320 but with fewer I/O and CAN channels
- Best suited for applications with CAN-based sensors
Downloads
VeeCAN 320 Display Examples
- A selection of displays created on the Raptor VeeCAN 320
-
Example of a fuel gauge and fuel status screen
-
A collection of dials showing engine information
-
A custom Raptor screen showing the battery meter, vehicle speed and engine speed
-
A very simple Raptor system information screen and menu
-
Anything is possible in Raptor, even a login screen such as this
-
Raptor's customization is shown heavily in this custom menu screen
-
A custom system menu screen capable of controlling the whole display
-
Raptor's possibilities are endless with customs displays like this one
