Required Files

Available Versions of MotoHawk

• MotoHawk 2011b SP0 for MATLAB 7.9 (2009b) to 7.13 (2011b)

• MotoHawk 2011b SP0 Release Notes

• MotoHawk 2011a SP0 for MATLAB 7.9(2009b) to 7.12 (R2011a)

• MotoHawk 2011a SP0 Release Notes

• MotoHawk 2010b SP0 for MATLAB 7.7(2008b) to 7.10 (R2010a)

• MotoHawk 2010b SP0 Release Notes

• MotoHawk 2010a SP1 for MATLAB 7.5 (R2007b) to 7.10 (R2010a)

• MotoHawk 2010a SP1 Release Notes

• MotoHawk 2010a SP0 for MATLAB 7.5 (R2007b) to 7.10 (R2010a)

• MotoHawk 2010a SP0 Release Notes

• MotoHawk 2009a SP1 for MATLAB 7.5 (R2007b) to 7.9 (R2009b)

• MotoHawk 2009a SP1 Release Notes

• MotoHawk 2009b SP0 for MATLAB 7.5 (R2007b) to 7.9 (R2009b)

• MotoHawk 2009b SP0 Release Notes

Compilers

GCC for PowerPC targets which may be used in MotoHawk 2009b Beta 2 to 2011a

• GCC PowerPC EABI 4.4.0 SP1

• Requirements: Read the Using GCC With MotoHawk instruction page for general instructions on using GCC in your models. This version of GCC is for all MPC5xx based controllers.

GCC for PowerPC targets which may be used in MotoHawk 2009b Beta 2 to 2011a

• GCC PowerPC EABI SPE 4.4.0 SP1

• Requirements: Read the Using GCC With MotoHawk instruction page for general instructions on using GCC in your models. This version of GCC is for all MPC55xx based controllers.

GCC for PowerPC targets which may be used in MotoHawk 2011b Beta Onwards

• GCC PowerPC EABI SPE 4.6.0

• Requirements: Read the Using GCC With MotoHawk instruction page for general instructions on using GCC in your models. This version of GCC is for all MPC55xx based controllers.

GCC for PowerPC targets which may be used in MotoHawk 2011b Beta Onwards

• GCC PowerPC EABI 4.6.0

• Requirements: Read the Using GCC With MotoHawk instruction page for general instructions on using GCC in your models. This version of GCC is for all MPC5xx based controllers.

Dongle Driver-Sentinel System Installer used in Green Hills 3.6 or 4.2.1

• Green Hills Dongle Driver-Sentinel System

• Sentinel System Driver Installer 7.5.1 used with Dongle-Locked Green Hills Compilers
• Requirements: Green Hills 3.6 or 4.2.1 with a dongle-locked license (This is not needed for node-locked licenses)
• Note: Choose to install the default setting, even for a USB dongle; the parallel port drivers also need to be installed

Required Files for Setting up MotoTune

• MotoTune 8.13.7.145

• MotoTune Calibration and Programming software (MotoTune license required)
• Requirements: MotoServerRuntime 8.13.7.145; Windows XP (32-bit or 64-bit), Windows Vista (32-bit or 64-bit), Windows 7 (32-bit or 64-bit)

• MotoServerRuntime 8.13.7.145

• MotoServer, CAN drivers, and security token drivers
• Windows XP (32-bit or 64-bit), Windows Vista (32-bit or 64-bit), Windows 7 (32-bit or 64-bit)

• MotoTune 8.13.7.140

• MotoTune Calibration and Programming software (MotoTune license required)
• Requirements: MotoServerRuntime 8.13.7.140; Windows XP or Windows Vista (32-bit)

• MotoServerRuntime 8.13.7.140

• MotoServer, CAN drivers, and security token drivers
• Requirements: Windows XP or Windows Vista (32-bit)

• MotoTune 8.13.7.120

• MotoTune Calibration and Programming software (MotoTune license required)
• Requirements: MotoServerRuntime 8.13.7.120; Windows XP or Windows Vista (32-bit)

• MotoServerRuntime 8.13.7.120

• MotoServer, CAN drivers, and security token drivers
• Requirements: Windows XP or Windows Vista (32-bit)

• MotoTune 8.13.7.87

• MotoTune Calibration and Programming software (MotoTune license requried)
• Requirements: MotoServerRuntime 8.13.7.87; Windows XP or Windows Vista (32-bit)

• MotoServerRuntime 8.13.7.87

• MotoServer, CAN drivers, and security token drivers
• Requirements: Windows XP or Windows Vista (32-bit)

• MotoTune 8.13.6.73

• MotoTune Calibration and Programming software (MotoTune license requried)
• Requirements: MotoServerRuntime 8.13.6.73; Windows XP or Windows Vista (32-bit)

• MotoServerRuntime 8.13.6.73

• MotoServer, CAN drivers, and security token drivers
• Requirements: Windows XP or Windows Vista (32-bit)

• Kvaser Drivers (4.0c) for MotoNet USB-CAN Interface

Required files for Fuse

• Download Fuse Beta v0.0.4

• Beta version of the Fuse visualization product.
• Requires ControlCore Server v0.0.4 Beta and Microsoft .NET 3.5 Framework.

• ControlCore Server Version 0.0.5 Beta

• Beta version of the ControlCore Server system communication and visualization server for the PC
• Requirements: Installer will download and install the .NET 2.0 framework from Microsoft if not installed. Installer will install Kvaser drives if needed
• Note: Fuse Beta4 Designers, due to design-time improvements please hold off installing this release until Fuse Beta5

• ControlCore Server Beta5 Evaluation License Extension
  • Extends the evaluation license for ControlCore Server Beta5 Until 12/31/2011
  • Requirements: Unzip and place in C:\Program Files\Common Files\MotoTron - overwriting existing evaluation license if necessary

• ControlCore Server Version 0.0.4 Beta
  • Beta version of the ControlCore Server system communication and visualization server for the PC
  • Requirements: Installer will download and install the .NET 2.0 framework for Microsoft if not installed. Installer will install Kvaser drivers if needed.

Required for using MotoService (MotoUpdate / MotoViewer)

• MotoUpdate 8.13.7.140

• Requirements: Windows XP or Windows Vista (32-bit)

• MotoService 8.13.7.140

• Requirements: Windows XP or Windows Vista (32-bit)

• MotoService 8.13.7.120

• Requirements: Windows XP or Windows Vista (32-bit)

• MotoUpdate Author

• The MotoUpdate tool which is used for reprogramming the ECUs uses '.mfu' files which are generated by MotoUpdate Author.

DBC File Editor

The File Editor allows the user to modify and create .dbc files. DBC File Editor

Kvaser Drivers

You can download the latest drivers for Kvaser USB-CAN interfaces at Kvaser's website.