VDO Gauge Blocks: Difference between revisions
(→V) |
No edit summary |
||
| Line 2: | Line 2: | ||
=== MotoHawk: Blocks: Model Info === | === MotoHawk: Blocks: Model Info === | ||
This block displays the current MotoHawk version and when it was built. | |||
[[image:model_info.jpg]] | [[image:model_info.jpg]] | ||
| Line 7: | Line 8: | ||
=== MotoHawk: Blocks: VDO Gauge Brightness === | === MotoHawk: Blocks: VDO Gauge Brightness === | ||
This block will set the brightness of the backlight | |||
on all of the gauges. | |||
[[image:VDO_Gauge_Brightness.jpg]] | [[image:VDO_Gauge_Brightness.jpg]] | ||
=== MotoHawk: Blocks: VDO Gauge Interface === | === MotoHawk: Blocks: VDO Gauge Interface === | ||
This block will enable the EZLink protocol on the selected resource of the module. The EZLink protocol will drive one or more VDO gauges. | |||
If "Dynamic Create" is checked, this resource will be created the first time this block is executed. | |||
[[image:VDO_Gauge_Interface.jpg]] | [[image:VDO_Gauge_Interface.jpg]] | ||
=== MotoHawk: Blocks: VDO Gauge LED Alarm Write === | === MotoHawk: Blocks: VDO Gauge LED Alarm Write === | ||
This block will update the displayed value of the LED Alarm gauge. | |||
Gauge -- the gauge to be updated. | |||
Each interval takes approximately 3.8msec. | |||
[[image:VDO_Gauge_Alarm.jpg]] | [[image:VDO_Gauge_Alarm.jpg]] | ||
=== MotoHawk: Blocks: VDO Gauge Reset === | === MotoHawk: Blocks: VDO Gauge Reset === | ||
This block resets all gauges on the bus back to their default value. | |||
[[image:VDO_Gauge_Reset.jpg]] | [[image:VDO_Gauge_Reset.jpg]] | ||
=== MotoHawk: Blocks: VDO Gauge Write === | === MotoHawk: Blocks: VDO Gauge Write === | ||
This block will update the displayed value of the gauge. | |||
Gauge -- the gauge to be updated. | |||
Each interval takes approximately 3.8msec. | |||
[[image:VDO_Gauge_Alarm.jpg]] | [[image:VDO_Gauge_Alarm.jpg]] | ||
=== MotoHawk: Blocks: Version Requirements === | === MotoHawk: Blocks: Version Requirements === | ||
This block allows requirements for the MATLAB version and MotoHawk version to be placed into a model. | |||
[[image:Model_Version_Requirements.jpg]] | [[image:Model_Version_Requirements.jpg]] | ||
Revision as of 13:30, 20 March 2012
M
MotoHawk: Blocks: Model Info
This block displays the current MotoHawk version and when it was built.
V
MotoHawk: Blocks: VDO Gauge Brightness
This block will set the brightness of the backlight
on all of the gauges.
MotoHawk: Blocks: VDO Gauge Interface
This block will enable the EZLink protocol on the selected resource of the module. The EZLink protocol will drive one or more VDO gauges.
If "Dynamic Create" is checked, this resource will be created the first time this block is executed.
MotoHawk: Blocks: VDO Gauge LED Alarm Write
This block will update the displayed value of the LED Alarm gauge.
Gauge -- the gauge to be updated.
Each interval takes approximately 3.8msec.
MotoHawk: Blocks: VDO Gauge Reset
This block resets all gauges on the bus back to their default value.
MotoHawk: Blocks: VDO Gauge Write
This block will update the displayed value of the gauge.
Gauge -- the gauge to be updated.
Each interval takes approximately 3.8msec.
MotoHawk: Blocks: Version Requirements
This block allows requirements for the MATLAB version and MotoHawk version to be placed into a model.
