|
|
| Line 5: |
Line 5: |
| [[image: NIRA_I7.jpg]] | | [[image: NIRA_I7.jpg]] |
|
| |
|
|
| |
| This is a high-end control module family capable of operating in harsh automotive, marine, and off-highway applications. The family and its connector system are environmentally sealed and suitable for engine mounting in many applications. Each controller is available in 'F' (flash) or 'C' (calibratible) versions. Flash modules are typically used for production purposes, while calibratible modules are typically for prototyping/development only and can be calibrated in real time using MotoTune.
| |
| These modules are based on Freescale MPC5553 or 5554 processors running at 80 MHz. The 112-pin modules offer a full complement of memory storage, 3 CAN channels, and many digital and analog I/O including frequency, crank position, and DSP knock detection, and EGO oxygen sensor inputs. Typical applications include EV / HEV Supervisory control and full OBD2 8 cylinder sequential engines.
| |
|
| |
|
| |
| '''Specifications'''
| |
| :*4 independent analog signal outputs (voltage or current)
| |
| :*User selectable output range from +/-10V or +/-20 mA, including: 0-5V; 0-10V; +/-5V; +/-10V; 0-20mA; 4-20 mA; and +/-20mA.
| |
| :*12V/24V/48VDC input power (nominal) with rugged surge protection
| |
| :*Galvanic isolation between power supply and analog signal outputs
| |
| :*Rugged IP67 packaging and connectors
| |
|
| |
|
|
| |
|
Revision as of 22:23, 28 June 2013
