Parker

Controllers

HCM-5604-36-1301 (CM0711)

The HCM-5604-36-1303 (CM711) is a rugged CAN Controller designed for Mobile Hydraulics. Alternatively, this controller can also act as an additional controller in systems where the existing main controller does not provide enough I/O for the system. The CM0711 has closed loop current control,datalogging, and it is able to measure analog and digital input signals. Multiple modules on the system can be identified using addressing ID tag inputs built into the wire harness.

Datasheet

Please Click Here for datasheet.

Webstore

Please Contact Sales

HCM-5534-90-1201/1302 (CM3626)

The HCM-5534-90-1201 (CM3626) is a controller for vehicle and other application with a steady voltage of less than or equal to 32 Vdc. It has 36 inputs and 26 outputs as well as 2 CAN/J1939 communication ports. The CM 3626 is especially suited for applications with higher demands on functional safety, where there is a need to prove the safety integrity of each implemented safety function. All outputs have diagnostics for both internal and external faults and, when used in safe mode, have return switches that provide a redundant shut down path. Two versions of the CM3626 are available, the HCM-5534-90-1201 with 768 kB of flash and the HCM-5534-90-1302 with and additional 2 MB of flash.

Datasheet

Please Click Here for datasheets.

Webstore

Please Contact Sales

HCM-5534-50-1203 (CM2115)

The New Eagle HCM-5534-050-1203 (CM2115), built by Parker, is a High Side Driver Hydraulic Controller. This unique controller is built for off-road and on-road applications. It has many high side drivers and I/O for mobile hydraulic and other machine control.

Datasheets

Please Click Here for datasheets.

Webstore

Please Contact Sales

HCM-ARM4-70-1401 (CM3620)

The Controller Module (CM) 3620 is an input/output controller that monitors digital, analog and frequency inputs, and controls solid-state switched outputs.

Datasheets

Please Click Here for datasheets.

Webstore

Please Contact Sales

AC Motor Controllers - Inverters

Parker MA3 Series Inverters

Parker’s MA3 Series inverter combines high performance motor control with intelligent control functionality. Suitable for either PMAC or AC induction motors, it also offers the flexibility of several feedback options. Speed and torque points can be adjusted instantaneously and performance algorithms optimized to the vehicle’s needs. On-board digital communications with multiple protocols come standard, along with a USB programming port. The rugged cast aluminum housing integrates a proprietary cooling configuration and necessary environmental protection for the toughest mobile applications.

MA3 Product Flyer

Parker Mobile Inverters, Motors, and ePumps Brochure

Contact Sales

For more information on Parker products, Contact Sales