Raptor:Standard Fault Status: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
 
No edit summary
Line 3: Line 3:
[[Raptor:Faults|Return to Faults page]]
[[Raptor:Faults|Return to Faults page]]


[[File:RaptorStandardFaultStatus.jpg|right|frame|Raptor Standard Fault Status]]
[[File:RaptorStandardFaultStatus.jpg|right|frame|Raptor™ Standard Fault Status]]


== Description ==
== Description ==

Revision as of 15:16, 4 March 2014

Return to the main Raptor page

Return to Faults page

Raptor™ Standard Fault Status

Description

This block outputs the status of the specified fault.

Inputs

Input Type Description

Outputs

Output Type Description
Not Occurred boolean Boolean indicating if the fault is in the not occurred state.
Suspected boolean Boolean indicating if the fault is in the suspected state.
Active boolean Boolean indicating if the fault is in the active state.
Occurred boolean Boolean indicating if the fault is in the occurred state.

Parameters

Parameter Type Description
Fault Source Selects source of fault to get the status of.
Fault Name String This is the name of the fault to get the status of (only available in certain modes).
Not Occurred Enables the not occurred output port.
Suspected Enables the suspected output port.
Active Enables the active output port.
Occurred Enables the occurred output port.

Supported Versions