Raptor:Output Status: Difference between revisions
Jump to navigation
Jump to search
Ssienkowski (talk | contribs) (Created page with 'Return to the main Raptor page Return to Input & Output page right|frame|Raptor == Description == <p>…') |
No edit summary |
||
| Line 3: | Line 3: | ||
[[Raptor:Input & Output|Return to Input & Output page]] | [[Raptor:Input & Output|Return to Input & Output page]] | ||
[[File:RaptorOutputStatus.jpg|right|frame| | [[File:RaptorOutputStatus.jpg|right|frame|Raptor™ Output Status]] | ||
== Description == | == Description == | ||
Revision as of 15:22, 4 March 2014
Return to the main Raptor page
Description
This block shows the status of the selected output. On modules which support output diagnostics this block can show if an output is shorted or shutdown do to over current.
The following status codes have been defined, however not all status codes may be supported be each module or output.
| Value | Description |
|---|---|
| 0 | No Fault |
| 1 | Output On |
| 2 | Short Circuit Detected |
| 3 | Over Current Detected |
| 4 | Open Load Detected |
| 5 | Back Driven Detected
e.g. LSD grounded, HSD shorted to battery |
| 6 | No Supply Voltage |
| 7 | Possible Short Circuit Detected |
| 8 | Over Voltage |
| 9 | Under Voltage |
Inputs
| Input | Type | Description |
|---|
Outputs
| Output | Type | Description |
|---|---|---|
| Faulted | boolean | Shows the fault status of the selected resource. Ok = 0, Faulted = 1 |
| Status Code | uint8 | Shows more detailed fault status information on the output. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Hardware Resource | Specifies which input from the hardware is being read. |
Supported Versions
- Raptor 2013a_0.0.1 and newer