Raptor:PWM Output: Difference between revisions
Jump to navigation
Jump to search
Ssienkowski (talk | contribs) (Created page with 'Return to the main Raptor page Return to Input & Output page right|frame|Raptor PWM Output == Description…') |
No edit summary |
||
| Line 3: | Line 3: | ||
[[Raptor:Input & Output|Return to Input & Output page]] | [[Raptor:Input & Output|Return to Input & Output page]] | ||
[[File:RaptorPWMOutput.jpg|right|frame| | [[File:RaptorPWMOutput.jpg|right|frame|Raptor™ PWM Output]] | ||
== Description == | == Description == | ||
Revision as of 15:22, 4 March 2014
Return to the main Raptor page
Description
This block sets the state of the selected PWM output. PWM (pulse width modulation) is typically used similar to an analog output.
Inputs
| Input | Type | Description |
|---|---|---|
| Duty Cycle | uint16 | The duty cycle of the output in 0.01%. For example raw value 500 = 5%. |
| Frequency | uint32 | The frequency of the output in 0.01Hz. For example raw value 40000 = 400Hz. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Hardware Resource | Specifies which input from the hardware is being read. | |
| Driver Type | Specifies the type of driver to be used on the selected output. |
Supported Versions
- Raptor 2013a_0.0.1 and newer