Using ATI Vision with Raptor: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{DISPLAYTITLE:Programing and Calibrating Raptor Controllers and Displays with ATI Vision}}  
{{DISPLAYTITLE:Programing and Calibrating Raptor Controllers and Displays with ATI Vision}}  
=ATI Vision=
==Online Calibrations==
While New Eagle's [[Raptor-Cal]] offers the most integrated support of typical calibration methodology workflows, we understand that you may already be familiar with a particular third-party calibration tool. As a result, [[Raptor-Controllers]] and [[Raptor-Displays]] support the industry standard XCP protocol, available in common calibration tools.
While New Eagle's [[Raptor-Cal]] offers the most integrated support of typical calibration methodology workflows, we understand that you may already be familiar with a particular third-party calibration tool. As a result, [[Raptor-Controllers]] and [[Raptor-Displays]] support the industry standard XCP protocol, available in common calibration tools.


* Open ATI Vision and select 'File->New...->Project File'
* Open ATI Vision and select 'File->New...->Project File'
** Name the project file
** Name the project file
[[file:ATI1.png|400px]]
* Right click on 'Computer', then click 'Add Device...'
* Right click on 'Computer', then click 'Add Device...'
** Select 'USB Port' and click 'OK'
[[file:RaptorCalibrationTools_AddDevice.jpg|400px]]
[[file:RaptorCalibrationTools_AddDevice.jpg|400px]]
* Select 'USB Port'
[[file:ATI4.png|400px]]
*  Click 'OK'
[[file:ATI5.png|400px]]
* Right click on 'USB', then click 'Add Device...'
* Right click on 'USB', then click 'Add Device...'
** Select 'USBCan II/Memorator/Leaf CAN Channel' or your CAN adaptor
[[file:ATI6.png|400px]]
** Enter a name and press 'OK'
 
* Select 'USBCan II/Memorator/Leaf CAN Channel' or your CAN adaptor
[[file:ATI7.png|400px]]
 
* Enter a name and press 'OK'
[[file:ATI8.png|400px]]
 
* Select the 'Settings' tab and enter the appropriate baud rate
* Select the 'Settings' tab and enter the appropriate baud rate
[[file:RaptorCalibrationTools_SetBaud.jpg|400px]]
[[file:RaptorCalibrationTools_SetBaud.jpg|400px]]
* Right click on your adaptor (USBcan), then click 'Add Device...'
* Right click on your adaptor (USBcan), then click 'Add Device...'
** Select 'XCP Controller Device' and then the name of the device in the subsequent dialog and press 'OK'
[[file:ATI10.png|400px]]
** Press 'OK'
 
* Select 'XCP Controller Device' and then the name of the device in the subsequent dialog and press 'OK'
[[file:ATI11.png|400px]]
 
* Press 'OK'
[[file:ATI12.png|400px]]
 
* Right click on your XCP device (PCM) and click 'Add Strategy...'
* Right click on your XCP device (PCM) and click 'Add Strategy...'
** Navigate to 'C:\Vision Projects\<ModelName' and select the strategy file you want to use
[[file:ATI13.png|400px]]
 
* Navigate to 'C:\Vision Projects\<ModelName' and select the strategy file you want to use
[[file:RaptorCalibrationTools_SelectStrategy.jpg|400px]]
[[file:RaptorCalibrationTools_SelectStrategy.jpg|400px]]
* Right click on '[Base Calibration]', then 'Save As...' and save a copy
* Right click on '[Base Calibration]', then 'Save As...' and save a copy
** You must create a copy in order to edit calibrations
** You must create a copy in order to edit calibrations
[[file:ATI15.png|400px]]
* Select 'File->New...' then 'Screen File'
* Select 'File->New...' then 'Screen File'
[[file:ATI16.png|400px]]
* When the new screen file opens, right click in the background and select 'Add Data Item Controls...'
* When the new screen file opens, right click in the background and select 'Add Data Item Controls...'
[[file:ATI17.png|400px]]
** Select and add the items you would like to display
** Select and add the items you would like to display
[[file:ATI18.png|400px]]
* Press the '!' button near the bottom left to go online
* Press the '!' button near the bottom left to go online
** Press 'Upload the strategy and calibration currently in the device' to pull the values from the ECU
[[file:ATI19.png|400px]]
** Proceed to upload by pressing 'Start'
 
* Press 'Upload the strategy and calibration currently in the device' to pull the values from the ECU
[[file:ATI20.png|400px]]
 
* Proceed to upload by pressing 'Start'
[[file:RaptorCalibrationTools_StartUpload.jpg|400px]]
[[file:RaptorCalibrationTools_StartUpload.jpg|400px]]
* When the upload is complete, press 'Close'. You are now online
* When the upload is complete, press 'Close'. You are now online
[[file:ATI22.png|400px]]


=====Merging offline Calibration Changes=====
<br>
==Merging offline Calibration Changes==
* Once you have made offline changes or opened your calibraion file, right click on the ECU device in the tree (PCM), then 'Export Memory Image'.
* Once you have made offline changes or opened your calibraion file, right click on the ECU device in the tree (PCM), then 'Export Memory Image'.
** Select 'Intel Hex-Record File'.
[[file:ATIoffline1.png|400px]]
 
* Select 'Intel Hex-Record File'.
[[file:RaptorCalibrationTools_SelectIntel.jpg|400px]]
[[file:RaptorCalibrationTools_SelectIntel.jpg|400px]]
** Choose a location and save the file with a .hex extension.
 
** Click finish
* Choose a location and save the file with a .hex extension.
[[file:ATIoffline3.png|400px]]
 
* Click finish
[[file:ATIoffline4.png|400px]]
 
* Open New Eagle's 'Raptor-Cal'
* Open New Eagle's 'Raptor-Cal'
** See [[Raptor-Cal]] for more information
** See [[Raptor-Cal]] for more information
* Click 'Program' > 'Create Raptor Package'
* Click 'Program' > 'Create Raptor Package'
[[file:RaptorPackager6.png|400px]]
[[file:RaptorProgram.png|400px]]
 
* Click on 'Program File (.Hex) and navigate to your new .hex file with offline calibration
* Click on 'Program File (.Hex) and navigate to your new .hex file with offline calibration
** Click 'start'
** Click 'start'
[[file:RaptorPackager6.png|400px]]
* Save the .rpg file created
* Save the .rpg file created
** Close the Raptor Package program
** Close the Raptor Package program
* Navigate to the 'Raptor-Cal' homepage and click 'Flash'
* Navigate to the 'Raptor-Cal' homepage and click 'Flash'
[[file:RaptorFlash11.png|400px]]
[[file:RaptorFlash11.png|400px]]
* Once the module (ECU) has been detected, click 'Select'
* Once the module (ECU) has been detected, click 'Select'
* Navigate to C:\ECU\RPG and open the .rpg file saved from using the Raptor Package program
* Navigate to C:\ECU\RPG and open the .rpg file saved from using the Raptor Package program
[[file:RaptorECU13.png|400px]]
[[file:RaptorECU13.png|400px]]
* Once the file is opened, it will automatically flash the ECU with offline calibrated changes
* Once the file is opened, it will automatically flash the ECU with offline calibrated changes

Revision as of 17:13, 5 July 2016


ATI Vision

Online Calibrations

While New Eagle's Raptor-Cal offers the most integrated support of typical calibration methodology workflows, we understand that you may already be familiar with a particular third-party calibration tool. As a result, Raptor-Controllers and Raptor-Displays support the industry standard XCP protocol, available in common calibration tools.

  • Open ATI Vision and select 'File->New...->Project File'
    • Name the project file

  • Right click on 'Computer', then click 'Add Device...'

  • Select 'USB Port'

  • Click 'OK'

  • Right click on 'USB', then click 'Add Device...'

  • Select 'USBCan II/Memorator/Leaf CAN Channel' or your CAN adaptor

  • Enter a name and press 'OK'

  • Select the 'Settings' tab and enter the appropriate baud rate

  • Right click on your adaptor (USBcan), then click 'Add Device...'

  • Select 'XCP Controller Device' and then the name of the device in the subsequent dialog and press 'OK'

  • Press 'OK'

  • Right click on your XCP device (PCM) and click 'Add Strategy...'

  • Navigate to 'C:\Vision Projects\<ModelName' and select the strategy file you want to use

  • Right click on '[Base Calibration]', then 'Save As...' and save a copy
    • You must create a copy in order to edit calibrations

  • Select 'File->New...' then 'Screen File'

  • When the new screen file opens, right click in the background and select 'Add Data Item Controls...'

    • Select and add the items you would like to display

  • Press the '!' button near the bottom left to go online

  • Press 'Upload the strategy and calibration currently in the device' to pull the values from the ECU

  • Proceed to upload by pressing 'Start'

  • When the upload is complete, press 'Close'. You are now online



Merging offline Calibration Changes

  • Once you have made offline changes or opened your calibraion file, right click on the ECU device in the tree (PCM), then 'Export Memory Image'.

  • Select 'Intel Hex-Record File'.

  • Choose a location and save the file with a .hex extension.

  • Click finish

  • Open New Eagle's 'Raptor-Cal'
  • Click 'Program' > 'Create Raptor Package'

  • Click on 'Program File (.Hex) and navigate to your new .hex file with offline calibration
    • Click 'start'

  • Save the .rpg file created
    • Close the Raptor Package program
  • Navigate to the 'Raptor-Cal' homepage and click 'Flash'

  • Once the module (ECU) has been detected, click 'Select'
  • Navigate to C:\ECU\RPG and open the .rpg file saved from using the Raptor Package program

  • Once the file is opened, it will automatically flash the ECU with offline calibrated changes
Retrieved from "https://wiki.neweagle.net//index.php?title=Using_ATI_Vision_with_Raptor&oldid=22873"