Raptor:Frequency Input Block: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
[[ | [[Raptor-Platform|Return to the main Raptor page]] | ||
[[Raptor:Input & Output|Return to Input & Output page]] | [[Raptor:Input & Output|Return to Input & Output page]] | ||
Revision as of 17:23, 16 December 2016
Return to the main Raptor page
Description
This block reads the value of a frequency input. Some modules also support duty cycle measurement through this input.
Inputs
| Input | Type | Description |
|---|
Outputs
| Output | Type | Description |
|---|---|---|
| Frequency Input | uint32 | The frequency of the selected input in 0.01Hz. For example, a raw value of 1000 = 10Hz |
| Duty Cycle | uint16 | The duty cycle of the selected input in 0.01%. For example, a raw value of 5000 = 50% duty cycle. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Hardware Resource | Specifies which input from the hardware is being read. | |
| Pull Up/Down | Specifies pull up/down resistor for input on modules which support this function. | |
| Duty Cycle Measurement | Enables duty cycle measurement on inputs and modules which support this function. |