Raptor:PWM Output: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
[[ | [[Raptor-Platform|Return to the main Raptor page]] | ||
[[Raptor:Input & Output|Return to Input & Output page]] | [[Raptor:Input & Output|Return to Input & Output page]] | ||
Revision as of 17:24, 16 December 2016
Return to the main Raptor page
Description
This block sets the state of the selected PWM output. PWM (pulse width modulation) is typically used similar to an analog output.
Inputs
| Input | Type | Description |
|---|---|---|
| Duty Cycle | uint16 | The duty cycle of the output in 0.01%. For example raw value 500 = 5%. |
| Frequency | uint32 | The frequency of the output in 0.01Hz. For example raw value 40000 = 400Hz. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Hardware Resource | Specifies which input from the hardware is being read. | |
| Driver Type | Specifies the type of driver to be used on the selected output. |